Members Mark Hastings AAX08801-3S Owner's manual

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Instructions & User's Manual
for
Members Mark Hastings 3pc Bistro Set
Item Number:
Model Number: AAX08801-3S
Customer Assistance : 1-800-416-3511
or Email: [email protected]
(spare/replacement parts)
Page 1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 2
Table of Contents
Quality Statement.............................................................3
Important Safety Information.............................................3
Before Assembly..............................................................3
Package Contents............................................................4
Product Information..........................................................5
Care & Use and Storage Instructions.................................11
Warranty Information.......................................................11
Swivel Rocker
Components................................................................6
Hardware....................................................................6
Tools..........................................................................6
Step1.........................................................................7
Components...............................................................8
Hardware...................................................................8
Tools..........................................................................8
Step1-Step4..........................................................9-10
Table

Before Assembly
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 3
Quality Statement
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box can provide an ideal work surface if none is available.
Use the components and hardware lists below to identify, inventory and
separate each of the hardware and components included.
To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
1Set / 2Ctn
Box1of2：
Box2of2：
Component Quantity
Description
A
B
C
Table Leg
2
4
Component QuantityDescription
A1
A B
Page 4
Package Contents
A
Table Top
Leg Connector
Bracket 1
C
Swivel Rocker

Description Dimensions
Part No.
ALE10515Table N
A.Foot Cap
FC0607 N/A N/A Y
A
N/A
Product information
27.5" RD * 27.75"H
A
Page 5
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Description Dimensions
Part No.
AAX08801 25.5" W *24.25" D *34.5" H
Weight
Capacity
Factory
Assembly
250lb per seat N
A.Foot Cap
FC0175 N/A N/A Y
Swivel Rocker
Weight
Capacity
Factory
Assembly

(H1)
5/16"X40MMBOLT
Qty: 4
PART NO:HW0807
(H2)
Qty: 4
Ø8.0 X 2.3 MM SPRING WASHER
PART NO:HW0003
(H3)
Qty: 2
"U" METAL PLATE
PART NO:HW0618
(H4)
Qty:
5/16" NUT
PART NO:HW0015
4
(H5)
Qty:
ROCKER PLATE
(
G0228
FACTORY ASSEMBLY)
PART NO:
2
Components
Hardware
A.
Part No.AR20323
Qty 1
CHAIR FRAME
Tools
Page 6
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(H7)
HEX WRENCH-2
HW0008
Qty:
PART NO:
1
(H6)
HEX WRENCH-1
HW000
Qty:
PART NO:
1
7
B.
Part No.AR20324
Qty 1
SWIVEL BASE & ROCKER
ASSEMBLY

"U" BAR
(H3)
U" METAL PLATE
Qty: 2
(H7)
HEX WRENCH-2
Qty: 1
(H6)
HEX WRENCH-1
Qty: 1
(H4)
5/16" NUT
Qty: 4
(H2)
Ø8.0 X 2.3 MM SPRING WASHER
Qty: 4
(H1)
5/16"X40MMBOLT
Qty: 4
"U" BAR "U" BAR
H3
H4
H2
H1
Hand tighten only 2-3 turns.
NOTE: Bolts must be
FULLY .tightened
AB
CD
E
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 7
Step 1
H6
H7
CAUTION:
1.Note the horseshoe shape of the rocker plate. Point the open end of the horseshoe away from you. The arrows
on the rocker assembly should be pointing towards you.
2.Failure to place "U" metal plates (H3) under the rocker plates and above the "U" bar exactly as shown in
diagram will cause the bolt heads and nuts to damage the structure of the rocker plates and the "U" bar. Damage
due to over tightening of bolts or improper assembly could cause injury and may void your warranty.

Components
Hardware
A.
Part No.
Qty 1
TABLE TOP
AT73112
B
Part No.
Qty 1
.LEG CONNECTOR BRACKET
AT73113
C.
Part No.
Qty 4
TABLE LEG
AT73114
Tools
Page 8
(H1)
1/4"X20MMBOLT
Qty: 8
PART NO:HW0802
(H2)
Qty: 16
Ø6.5 X 1.0 MM WASHER
PART NO:HW0004
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(H4)
Qty: 1
HEX BOLT DRIVER
PART NO:HW0006
(H5)
Qty:
HEX WRENCH
HW0009
PART NO:
1
(H3)
1/4" NUT
Qty:
PART NO:HW0014
8

outer carton
(H2)
Qty: 8
Ø6.5 X 1.0 MM WASHER
(H3)
1/4" NUT
Qty: 8
Hand tighten only 2-3 turns.
Hand tighten only 2-3 turns.
H1
H2
H2
H3
(H1)
1/4"X20MMBOLT
Qty: 8
Step 1
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step1-Step4
Page 9
(H2)
Qty:
Ø6.5 X 1.0 MM WASHER
8

4x
(H5)
Qty:
HEX WRENCH
1
H4
4x
H5
4x
(H4)
Qty: 1
HEX BOLT DRIVER
NOTE: Bolts must be
FULLY tightened.
Step 3
Step 4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 10

CARE AND MAINTENANCE
FRAMES
FABRICS (CUSHIONS/SLINGS)
STRAPS
Cleaning
Maintenance
Cleaning -
Maintenance
Cleaning -
Maintenance -
- Use mild soap and warm water. Do not use abrasive materials, cleansers or bleach
products. Rinse with clean water and dry thoroughly.
- Periodically clean and dry thoroughly. Be sure to drain any water accumulated
inside the frames. To thoroughly drain frames, remove foot caps and tilt the frames, if necessary, to
remove all water. This is critical. Water allowed to accumulate inside the frames and then
exposed to sub-freezing temperatures can cause damage to the frame tubing. Always clean, drain
and dry thoroughly before storing for the winter. For best results, always store or cover your
furniture when not in use. We recommend commercially available outdoor furniture covers. Any
small nicks or scratches can be covered with a light application of touch-up paint.
** When cleaning or moving large or heavy items, always have two people work together. Never
drag furniture.
Wipe minor spills immediately. Clean with mild soap, warm clean water, and soft cloth.
Do not use abrasive materials, cleaners, or bleach products. Although fabric has been treated to
resist stains, occasional use of commercially available fabric cleaners may be necessary. Follow
manufacturer's instructions.
- The best way to maintain the beauty of cushions and slings is to store them in a dry
area and out of the elements when not in use or cover with commercially available outdoor
furniture covers.
Wash frequently with mild soap, warm water and a soft cloth. Rinse thoroughly with
warm, clean water. Do not use abrasive materials, cleansers or bleach products.
Periodic application of commercially available vinyl cleaners and vinyl protectors will
enhance the look and prolong the life of straps. If your strap chair has cushions, make sure any
vinyl protectors applied are completely dry before placing cushion back on the chair.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Care & Use Instructions
Warranty Information
This product component has a 5 year guarantee against defects in material and/or workmanship. If
you have any questions regarding the warranty or spare / replacement parts, please call our toll-
free number 1-800-416-3511 or email us at [email protected]
NOTE: Please consider recycling all applicable packaging material.
Page 11

Distributed by Sam's West Inc.
2101 SE Simple Savings Dr.
Bentonville, Arkansas 72716-0745
Made in China
Page 12
Need Assistance? Visit us at: samsclub.com/membersmarkhelp