Members Mark FW-ANS7DND Owner's manual

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Assembly Instructions & User’s Manual
for
Member’s Mark Athena 7 Piece Dining Set
Item Number: 980297041
Model Number: FW-ANS7DND
Customer Assistance (spare/replacement parts): 1-800-443-1410
or Email: [e-mail]
DISCLAIMER: Supplier is fully responsible for the entire content of the assembly manual, in-
cluding all Sam’s Club suggested edits or revisions.
THIS ASSEMBLY MANUAL CONTAINS INPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Table of Contents
Quality Statement ...............................................................................................................................3
Important Safety Information............................................................................................................3
Before Assembly.................................................................................................................................3
Care & Use ...........................................................................................................................................3
Package Contents...............................................................................................................................4
Product Information ...........................................................................................................................5
Components ........................................................................................................................................5
Hardware ..............................................................................................................................................6
Tools......................................................................................................................................................6
Step 1 ...................................................................................................................................................7
Step 2 ....................................................................................................................................................8
Step 3 ....................................................................................................................................................9
Step 4 – Step 5...................................................................................................................................10
Step 6 ..................................................................................................................................................11
Warranty Information .......................................................................................................................12

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Quality Statement
Important Safety Information
• Please read all instructions carefully before assembling this furniture.
• For your safety, assembly by two or more adults is strongly recommended.
• Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
• Hardware may loosen overtime. Periodically check that all connections are tight.
• NOTICE: To prevent injury and property damage from unexpected tipping of fur-
niture, we highly recommend installation of the anti-tip kit included with this prod-
uct.
Before Assembly
• Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
• The shipping box provides an ideal work surface.
• To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
• Use the parts and hardware lists below to identify and separate each of the pieces
included.
• The use of power tools for assembly is not recommended. Power tools can dam-
age the hardware and/or split the wood.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these
instructions may cause the bolts to misalign during assembly.
Care & Use
• Dust often and use a vacuum cleaner crevice tool to clean seams. To maintain the
leather appearance, gently clean soiled areas with a soft cloth dampened with a
mild, water based detergent. Remove all lather and wipe with a clean damp cloth.
Dry with another soft cloth by blotting the damp surface (do not rub).
• Do not place furniture in direct sunlight and keep furniture at least 60 cm / 2 ft from
heat sources to avoid fading.
[NOTE: Please add any additional required Care & Use Instructions. These will be item depend-
ent and based upon factory and industry standard requirements & recommendations.]

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Package Contents
B
A
C
Component Description Quantity Component Description Quantity
AChair Frame 6FUmbrella Hole Lid 1
BChair leg 24 GFurniture Cover 1
CSeat Cushion 6H
DTable Top 1I
ETable Leg 4
E
D
G
F

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Product Information
Dimension:
Dining Chair: 27.50” x 25.00” x 36.25”
Dining Table: 80.00 “x 40.00” x 29.50”
Weight Capacity:
Dining Chair: 250 lbs
Components
Component A
Part No. PF-ANS-DC-A-20
Qty 6
Component B
Part No. PF-ANS-DC-B-20
Qty 24
Component C
Part No. PF-ANS-DC-C-20
Qty 6
Component D
Part No. PF-ANS-DT-A-20
Qty 1
Component E
Part No. PF-ANS-DT-B-20
Qty 4
Component F
Part No. PF-ANS-DT-C-20
Qty 1
Component G
Part No. PF-ANS-DT-D-20
Qty 1

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Hardware
Tools
Bolt (M6 x 25 mm) AA
Part No. PF-ANS-DC-HP-20
Qty 72
Bolt (M8 x 40 mm) BB
Part No. PF-ANS-DT-HP-20
Qty 8
Washer (M6) CC
Part No. PF-ANS-DC-HP-20
Qty 72
Washer (M8) DD
Part No. PF-ANS-DT-HP-20
Qty 8
Lock Washer (M6) EE
Part No. PF-ANS-DC-HP-20
Qty 72
Lock Washer (M8) FF
Part No. PF-ANS-DT-HP-20
Qty 8
M6 Allen Wrench GG
Part No. PF-ANS-DC-HP-20
Qty 1
M8 Allen Wrench HH
Part No. PF-ANS-DT-HP-20
Qty 1

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
STEP 1
Place the Chair Seat (A) at its side on a soft, smooth surface. Loosely attach the
Chair Legs (B) to the Chair Seat (A) using M6 x 25 mm Bolts (AA), Lock Washers
(CC) and Washers (DD). Once all Bolts (AA) are in place and the Chair Legs (B)
are aligned with the Chair Seat (A), tighten all Bolts (AA) with supplied Allen
Wrench (EE). When positioning the Chair Legs (B), make sure the flush sides are
facing outward
A
DD
CC
AA
AA
CC
DD
EE

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
STEP 3
Turn the chair to the upright position and place the Seat Cushion (C) on the chair and
check the stability. If the chair wobbles, loosen the foot glider counter clockwise until the
chair stands completely stable. Then your chair is ready for your enjoyment.
C

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Place the Table Top (D) upside down on a so, smooth surface. Posion the Table Legs (E) into the
corner sockets on the Table Top (D). Loosely secure with M8 x 40 mm Bolts (BB), M8 Lock Washers
(FF) and M8 Flat Washers (HH). Once all Bolts (BB) are in place, ghten all Bolts (BB) using supplied
Allen Wrench (EE).
FF
HH
BB
EE
STEP 3
E
E
D

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
STEP 4
Included is a complimentary Furniture Cover (F ). Use the Furniture Cover (F) to cover the furni-
ture when not in use for long periods of time to prolong the life of your outdoor furniture and to
protect it from the outdoor elements.
Turn the table to the upright posion and check the stability. If the table wobbles, loosen
the foot glider counter clockwise unl the table stands completely stable. Please cover the
umbrella hole with the umbrella hole lid (G) if you don’t need the umbrella at the moment.
The dining table is ready for your enjoyment.
F
G
STEP 5