Mercado Medic REAL 9000 PLUS Series Assembly instructions

INSTRUCTIONS FOR USE AND CARE
REAL 9000 PLUS/ELECTRIC/ADULT/CHILD/
MINI/COXIT
Item no. 805210
Last amended 06-09-19
Valid from 01-06-07
REAL PLUS REAL PLUS CHILD/MINI REAL PLUS COXIT
REAL PLUS ELECTRIC REAL PLUS CHILD/
MINI ELECTRIC
REAL PLUS COXIT
ELECTRIC
REAL 9000 PLUS is a Class I medical device. It is CE marked in accordance with the Swedish Medical Products Agency’s
code of statutes for medical devices, LVFS 2003:11, and has been tested and approved in accordance with EN 1335,
IEC 60601 and EN 12182. All textiles used in the chair have been tested and approved in accordance with EN 1021-
1 and EN 1021-2. Mercado Medic AB is certified in line with both ISO 9001 and 14001 and complies with applicable
labour and environmental legislation.
If you have any questions about your product, or if something unexpected happens, please contact
your prescriber first; otherwise you are welcome to contact us at Mercado Medic AB.
PDF versions of our instructions for use and care with magnification options can be found on our website:
www.mercado.se. Information is also provided on the website about accessories that can be mounted on Mercado
Medic’s chairs, together with any field safety notices, prescribing support or recalls of products and accessories.
We reserve the right to make changes to this manual and its contents.
Sufficient competence in the safe use of this product is achieved by carefully reading
through these instructions for use and care before using the chair for the first time.

IMPORTANT INFORMATION AND CLASS PAGE 2
INSTRUCTIONS FOR DESTRUCTION PAGE 2
FAMILIARISE YOURSELF WITH YOUR REAL 9000 PLUS PAGE 2
INDIVIDUAL ADAPTATION PAGE 3
USER MANUAL PAGE 4
CLEANING, MAINTENANCE AND CHARGING PAGE 6
RECONDITIONING PAGE 7
CONTENTS
IMPORTANT INFORMATION AND CLASS
• REAL PLUS ELECTRIC complies with protection class II, internal battery.
• REAL PLUS ELECTRIC complies with protection type B.
•REAL PLUS ELECTRIC has been EMC tested in accordance with EN 60601-1-1 and EN 60601-1-2 and must
therefore be handled in accordance with our instructions for use and care.
•The EMC annex is available to download at mercado.se/dokument
•REAL PLUS ELECTRIC may be affected by interference from mobile phones or other RF communication equipment.
•Max. user weight: REAL PLUS 140 kg. REAL PLUS ELECTRIC 150 kg.
•The chair must be transported in the intended cardboard box on a pallet. It must be stored indoors at a temperature of
at least +10 °C.
•Only electrical equipment from Mercado Medic AB may be used on REAL PLUS ELECTRIC.
•NOTE! The electrical functions on REAL PLUS ELECTRIC chairs may be used for max. 10 % of the time
(max. 6 min/h). Exceeding this limit may result in damage to the chair.
•If REAL PLUS ELECTRIC is equipped with legrests, the user’s feet must remain on the footplate when using the
electrical functions.
•Warning symbols that may appear on the chair: Risk of crushing(1), Hot surface(2)
The REAL chair has replaceable components, accessories and functions with adjustment options for individual adap-
tation. The chair must only be used by the person for whom it was prescribed and for the purpose for which it is
intended. The chair is intended for indoor use and must not be exposed to water, other fluids or chemicals. Nor should
it be exposed to high temperatures, prolonged and intense sunlight or other forms of radiation. The chair must not be
equipped with any accessories or components other than those approved by Mercado Medic AB. To maintain the CE
marking, modifications or changes must not be carried out without Mercado Medic AB’s approval. Repairs and other
technical measures may only be carried out by personnel authorised by Mercado Medic AB. Read these instructions
carefully before using the chair for the first time.
Combustible:
•Seat
•Back
•Armrest
•Headrest
•Other padded parts sold by Mercado Medic AB
Electronic waste:
•Motors
•Cables
•Control system
INSTRUCTIONS FOR DESTRUCTION
Metal:
•Base
•Electric lifting mechanism
•Gas pistons
•Gas springs
•Seat frame
•Back recliner
•U-bars and armrest mechanism
•Other metal parts in products sold by Mercado Medic AB
NOTE! The battery has to be sorted separately.
1 2

CHECK POINTS BEFORE USE
1. Adjust the armrests to a suitable height and lock the knob for height adjustment.
2. Fit the back pole in the intended bracket and lock the knob for height adjustment of the backrest.
3. Fit the brake lever in the intended bracket (left or right side). Does not apply to electric brakes.
4. All wheels and knobs must be tightened before sitting in the chair.
5. The brake on the chair must always be applied when getting in and out of the chair.
6. Charge the chair according to the enclosed instructions before using it for the first time (applies to electric chairs).
FAMILIARISE YOURSELF WITH YOUR REAL 9000 PLUS
GUIDELINES FOR INDIVIDUAL ADAPTATION OF MERCADO MEDIC AB’s PRODUCTS
Adaptations may only be made by personnel who have attended Mercado Medic AB’s course on servicing and
reconditioning. Parts that are on the list of current combination agreements at www.mercado.se/mercado-dokument
can be tted without aecting Mercado Medic AB’s CE marking. Before tting a part that is not on the list of current
combination agreements, the customer’s authorised personnel must contact Mercado Medic AB for written approval.
Parts to be evaluated must be sent physically to Mercado Medic AB, either by the customer or the supplier of the part
in question. Mercado Medic AB will then contact the supplier of the part in question; if a combination agreement is
deemed to be of interest, Mercado Medic AB performs a risk analysis on the part. Once the risk analysis is complete, the
customer receives a written opinion.
Chairs that have been modied according to the following must be veried by Mercado Medic AB for Mercado
MedicAB to retain product liability.
• Padded parts such as seats, backrests, armrests, side supports, trunk supports and headrests may be adapted so long
as you do not exceed the product’s existing external dimensions.
• e centre of gravity over lifting devices must be maintained/centred for optimum function.
• Padded parts must be able to withstand the applicable ammability requirements and other environmental
requirements.
• Surfaces that are loaded with signicant vertical forces must not fall outside the area (base) formed by the points
ofthe castor centres.
If these guidelines are met, Mercado Medic AB retains the product liability for its product.
Products that are specially modied by the health care services outside Mercado Medic AB’s directive, where the health
care services also take over the product liability, can be restored to their original condition. is must be carried out by an
authorised technician approved by Mercado Medic AB. Mercado Medic AB then resumes product liability in accordance
with the CE marking 93/42 EEC; Medical Devices Directive MDD.
If you have any questions regarding adaptations/special adaptations, contact Ronny Fogelqvist:
Tel. [phone]
E-mail ronny[email protected]

SEAT HEIGHT/LIFTING MECHANISMS
BRAKE
THERE ARE TWO TYPES OF LIFTING
MECHANISM:
Gas spring and electric. There are standard and low
seat heights. Controls for the gas spring can be placed
under the seat or armrest. Electric controls are fitted
under the armrest as standard. NOTE! Light people
may need help raising and lowering seats controlled by
a gas spring.
CONTROLS
1. Seat height. Gas spring – move lever up.
2. Seat height. Electric – move switch up/down.
3. Seat height. Electric – controls in separate box.
Left button = up.
Right button = down.
NOTE! The brake on the chair must always be applied
when getting in and out of the chair. The brake must
be checked on a regular basis. In case of wear, change
the brake rubber. The braking function may be
reduced on uneven surfaces.
THERE ARE THREE TYPES OF BRAKE:
Brake lever, foot brake and electric brake.
CONTROLS
1. Brake, PLUS base 48 move lever forward.
2. Brake, PLUS base 43 move lever backward, pedal down.
3. Electric brake, press button.
4. Electric brake, press button.
5. Handbrake on transport base, brake fully and press down
the red lever. To release – push the handle up until the
lever releases.
6. Brake lever bracket – to apply the brake even when the
armrest is extended in width: loosen the screw on the
brake lever bracket using a 6 mm hex key, pull out the
bracket, fasten the screw in the next hole and tighten the
screw hard using the hex key.
1
2
3
SEAT TILT (OPTION)
THERE ARE THREE TYPES OF SEAT TILT:
Crank, gas spring and electric. Controls for the gas
spring can be placed close to the left rear edge of the
seat or under the armrest. Electric controls are fitted
under the armrest as standard. Standard seat tilt range
is +15º/-8º.
CONTROLS
1. Seat tilt. Crank controlled – turn knob.
2. Seat tilt. Gas spring – move lever back.
2. Seat tilt. Gas spring – move lever up.
4. Seat tilt. Electric – move switch up/down.
5. Seat tilt. Electric – controls in separate box.
Left button = forward
Right button = backward.
Gas spring lever under the seat
Handbrake and foot brake
Gas spring lever under
the armrest (option)
Electric brake (option) Electric brake controls
in separate box (option)
Electrically controlled
Electric controls in separate
box/joystick/remote control are
available as options.
The image shows the separate
box option.
Gas spring lever under
the seat
2
Gas spring lever
under the armrest
3
Crank controlled
1
Electrically controlled Electrically
controlled in
separate box
4
3
1
4
5
6
5
Brake lever bracketHandbrake
1
2

ARMREST
CONTROLS
1. Height adjustment.
2. Width adjustment.
3. Folding. 1
1
13
2
2
2
BACK MECHANISM
THERE ARE FOUR TYPES OF
BACK MECHANISM:
Standard, Medic, Comfort and Electric. All are
available in a low and high design (illustrated chairs all
have a low back). All back mechanisms have separate
controls for height, depth and angle. The Medic
model has extended depth adjustment.
CONTROLS
1. Height.
2. Back mechanism angle.
3. Backrest angle.
4. Depth.
5. Back angle. Electric controls in separate box.
Left button = forward
Right button = backward.
NOTE! Make sure that the Medic recliner is adjusted in
the bracket so the spring button clip locks and the back
recliner cannot be pulled out.
Standard
Standard Foldable armrest
(option)
1
1
3
3
2
2
4
Medic (option) Comfort (option) Electrically controlled
(option)
1
1
2
2
33
REVERSED SEAT TILT OR WHOLE SEAT TILTS BACKWARD (OPTION)
CONTROLS
1. Armrest placed here follows the seat’s tilt.
2. Armrest placed here does not follow the seat’s tilt.
3. There are 3 positions. If using position 3, the chair
must be fitted with a base extender.
1. Forward 15˚, back 8˚ – standard seat tilt
2. Forward 8˚, back 15˚ – reversed seat tilt
3. Forward 0˚, back 23˚ – whole seat tilts backward
3
2
1
3
2
1
ROTATION RELEASE (OPTION)
NOTE! The rotation must be locked in position when getting
in and out of the chair. Check that the catch has "clicked" in.
CONTROLS
1. Turn clockwise to disengage, and counterclockwise to lock.
1
Electrically controlled
in separate box
(option)
5