Mercado Medic SCRIBA User manual

SCRIBA
Doc.nr: 20-07330
Rev: 01
Created: 2020-05-13
Updated: 2021-01-11
ENG
Original assembly instructions
Instructions for assembly & handling

2
SCRIBA
If you have any questions about your product or if something unexpected has
happened, please contact your dealer first, otherwise you are welcome to
contact Mercado Medic.
PDF versions of our operating and maintenance instructions with
magnification options can be found on our website www.mercado.se.
We reserve the right to make changes to this manual and its contents.

3
SCRIBA
Table of content
1. Parts list ........................... 4
1.1. Table tops............................. 4
1.2. Base frame ........................... 4
1.3. Attachments .......................... 5
1.4. Drawer box parts....................... 6
1.6. Tilt parts .............................. 7
1.5. Fasteners ............................. 7
2. Frame (Art. 805118)................. 8
2.1. Subassembly – Legs .................... 8
2.2. Subassembly – Crossbar ................ 9
2.3. Mounting the legs .....................10
2.4. Subassembly – Drive ..................11
2.5. Mounting the drive ....................12
2.6. Mounting the drive shaft ...............13
2.7. Mounting the side bars.................14
2.8. Mounting the crank rest ................15
2.9. Mounting the crank....................16
3. Arm & bar .........................17
3.1. Placement of support console ..........17
3.2. Mounting the support consoles .........18
3.3. Mounting the support arm and
securing the second support console ....19
3.4. Mounting drawer box crossbars .........20
4. Drawer Box........................21
4.1. Mounting crossbar for drawer...........21
4.2. Mounting drawer box ..................22
5. Frame Cover.......................23
6. Rastomat Bracket ..................24
6.1. Mounting the rastomat bracket. . . . . . . . . . 24
7. Tabletop Attachments ..............25
7.1. Rotation joint .........................25
7.2. Tabletop support, fixed ................25
7.3. Tabletop support, furniture pad .........26
7.4. Spacer (for tabletop support) ...........26
8. Attachments Points.................27
8.1. Possible attachment points on the frame . 27
8.2. Tabletop 750x600mm (Flat) ............28
8.3. Tabletop attachments ................28
8.4. Tabletop 750x600mm (Tilt) ............29
8.5. Tabletop attachments .................29
8.6. Tabletop 750x600mm (Hinge) ..........30
8.7. Tabletop attachments .................30
8.8. Tabletop 1000x600mm (Flat)...........31
8.9. Tabletop attachments .................31
8.10. Tabletop 1000x600mm (L-shape, hinge) . 32
8.11. Tabletop attachments .................32
8.12. Tabletop 1000x600mm (Divided, tilt) ....33
8.13. Tabletop attachments .................33
8.14. Tabletop 1000x600mm (Centered, hinge) 34
8.15. Tabletop attachments .................34
8.16. Tabletop 1000x600mm (Centered, flat) ..35
8.17. Tabletop attachments .................35
8.18. Tabletop 1000x600mm (Centered, tilt). . . 36
8.19. Tabletop attachments .................36
9. Tilt mechanism ....................37
9.1. Mounting the tilt mechanism ...........37

4
SCRIBA Parts list
1. Parts list
1.1. Table tops
805140 Table top flat 1000x600 cpl Right
805139 Table top flat 1000x600 cpl Left
805145 Table top side 600x245 cpl
805141 Table top flat 750x600 mm cpl Magnetic
805190 Table top flat 750x600 mm cpl None Magnetic
805142 Table top hinge fold 1000x600 cpl Left
805143 Table top hinge fold 1000x600 cpl Right
805144 Table top hinge fold 750x600
805280 Table top centered 1000X600 cpl None magnetic
805281 Table top centered 1000X600 cpl Magnetic
805282 Table top hinge fold 1000x600 cpl No belly hole
805283 Table top centered 1000X600 cpl None magnetic 30x12 cm Belly hole
805284 Table top centered 1000X600 cpl Magnetic 30x12 cm Belly hole
1.2. Base frame
805118 Table frame ATYP SIMPLE 1 C 2s V5 H300

5
SCRIBA Parts list
805125
805124
805134 805135
805137
805120
1.3. Attachments
805120 Support Console
805134 Support arm left side
805135 Support arm right side
805125 Crossbar welded
805124 Crossbar small
805128 Frame cover 710 mm
805129 Frame cover 960 mm
805136 Table support assembly
805137 Table support distance
805129
805128
805136

6
SCRIBA Parts list
1.4. Drawer box parts
804642 Drawer box welded
805149 Plastic Drawer, Black
805150 Plastic Drawer, Blue
805151 Plastic Drawer, Cyan
805152 Plastic Drawer, Green
805153 Plastic Drawer, Grey
805154 Plastic Drawer, Lime
805155 Plastic Drawer, Orange
805156 Plastic Drawer, Pink
805157 Plastic Drawer, Red
805158 Plastic Drawer, Yellow
805159 Drawer Slides
805127 Distance Asmb for drawer box
802038 K6S M6x20 black chromated
800127 NB 6x22x1,5 FZB
805127 802038 800127

7
SCRIBA Parts list
1.5. Fasteners
805131 MC6LS M6x12
800417 MC6S M6x14 FZB 8.8
801566 MF6S M6x16 OBEH 10.9
803771 MC6S M6x30 8.8 FZB
800462 BRB 6,4x12x1,5
800126 BRB 8,4x16x1,6
800117 LM6M M6
805130 Furniture pad Ø38
1.6. Tilt parts
805148 Vertical tilt mech hold mount.
805119 Bracket tilt mechanism holder
805146 Tilt mechanism holder screw
805133 Rotation part
800131 CPK 8x36 Tol.h6
803840 Rastomat 214-354 mm
805126 Damper assembly
805138 Table top bracket
804624 MC6S M8x35 FZB
800091 MLC6S M8x16 8.8 FZB
800445 LM6M M8 FZB
800385 MF6S M8x16 FZB 10,9
801289 Alu. distance 15x8.5x9.5 f gas spring seat angle
805148 805119 805146
805133
803840
805126
805138 804624
800445 801289
800417
800462 800126 800117 805130
800131
800091 800385
805131 801566 803771

8
SCRIBA Frame (Art. 805118)
2. Frame (Art. 805118)
2.1. Subassembly – Legs
Looking at the table legs from the front, the blue part of the motor housing should be on the left side, and the
U-shaped bracket should be facing the center of the table.
Left Right

9
SCRIBA Frame (Art. 805118)
For small tabletop, 750x600mm
For large tabletop, 1000x600mm
2.2. Subassembly – Crossbar

10
SCRIBA Frame (Art. 805118)
2.3. Mounting the legs

11
SCRIBA Frame (Art. 805118)
2.4. Subassembly – Drive
Depending on the desired location of the height adjustment crank, the drive needs to be assembled appropriately
for mounting on the left(2A) or right(2B) side of the table.
1
2A 2B

12
SCRIBA Frame (Art. 805118)
2.5. Mounting the drive
!The drive can be placed on the right or left end of the trough depending on the desired final location of the
height adjustment crank. The pictures below illustrates the drive being mounted on the right side.

13
SCRIBA Frame (Art. 805118)
2.6. Mounting the drive shaft
1
2 3

14
SCRIBA Frame (Art. 805118)
2.7. Mounting the side bars
Fasten both bars securely with screws from the front and back.

15
SCRIBA Frame (Art. 805118)
2.8. Mounting the crank rest

16
SCRIBA Frame (Art. 805118)
2.9. Mounting the crank
NOTE! To have the crank resting in a downward position, the handle must be oriented correctly when secured to
the joint(2). If correct, securing the handle and joint to the drive should look like what is illustrated below.
1
2 3

17
SCRIBA Arm & bar
3. Arm & bar
3.1. Placement of support console
!The support consoles have to be oriented
accordingly to its position, please see below.
60 mm
65 mm
60 mm
65 mm
805120
Support Console

18
SCRIBA Arm & bar
3.2. Mounting the support consoles
8x800417 M6x14

19
SCRIBA Arm & bar
3.3. Mounting the support arm and securing the second support console
4x801566 M6x16
4x800417 M6x14
805134 Support arm left side /
805135 Support arm right side

20
SCRIBA Arm & bar
3.4. Mounting drawer box crossbars
Depending on your table configuration, the mounting of one or both of the crossbars may be required. Please
check the Parts list of your configuration to see what is applicable for your table.
805131
M6x12
805125
Crossbar welded
805124
Crossbar small
800117
M6