Mercedes-Benz MB-NTG4.5 Instruction manual

LVDS ANTHDMI-IN CAN/POWER
DIP-SW
USB/VIDEO
Model No.: MB-NTG4.5/4.7
V1.0
Connect phone/USB stick
Rear camera in
Front camera in
Camera 12V out, supply power for front & rear
view camera
ACC 12V out, always supply power
for external A/V device
Reverse detect, connect to reversing light positive
if "camera 12V out" does not output 12V when shift
to R gear, and enable "Activate R-CAM through
Reversing Lights" in settings
GND
Provided LVDS Cable
OEM LVDS cable
Connect to OEM LVDS
cable from screen
DIP
Screen size 5 6
1
2
3
4
5
6
7
8
Add-on microphone
Set to OFF△
Set to OFF△
Selection for screen size
Set to ON▼
Set to OFF△
Set to ON▼
Original microphone
7 inch
5.8 inch (default)
5.8 inch (alternative)
DIP SWITCH SETTINGS
Connect to
head unit
Connect to
head unit
connect to an FM transmitter
(not included) for audio delivery
if the OEM radio AUX feature
has not activated.
OEM quadlock connector
OEM head unit
Connect to OEM
quadlock connector
NOTE! Please
DO NOT
stick on the
metal part
NOTE! Please try another car model DIP settings if your current car model DIP doesn't work. Disconnect and reconnect interface's
power for effective after changing any DIP setting.
OFFON
OFF
OFF
ON ON
ON
ON

SWITCH:
“ BACK ”button for 3s
Press and hold
OEM UI Add on UI
OEM RADIO AUDIO SETTINGS:
Please activate the hidden AUX input function in engineer menu or using OBD
activator (not included). Then select “AUX”mode for audio transmission
before suing the integration before using the integration.
WHAT'S IN THE BOX
Power/CAN harness USB/Video cable LVDS cable WiFi/BT antenna
Press and hold the "BACK" button for 10s will restart the integration immediately
QUICK RESTART TIPS:
Main unit
Dimension: 148*94*22mm