Mercedes-Benz NTG 6.0 MBU User manual

INSTRUCTION
MANUAL
CAMERA INTERFACE FOR MERCEDES-BENZ
NTG 6.0 MBUX (7 INCH)
Product No. 27-591

2
CONTENT
COMPATIBILITY............................................................................................. 4
FEATURES ..................................................................................................... 4
PACKAGE COMPONENTS............................................................................... 5
CONNECTION DIAGRAM ............................................................................... 6
DIP SETTING ................................................................................................. 7
HOW TO ENTER DVR VIDEO IN (VIDEO 3) ...................................................... 8

3
WARNING
In order to protect the driving safety and avoid break the traffic law; please DO NOT operate the
interface while driving.
The reversing surveillance function just is used in reversing assistance. Please check the entire
surroundings while reversing.
All steps of installation should be done by the well-trained specialist.
During installation, the ignition key should be taken off and after all installation finished, connect
power cable last.
Please DO NOT plug or pull the connected cables in the state of power-on, in order to avoid
damaged monitor or accessory.
Install wiring in a manner in which cables will not come in contact with metal parts. The wiring
may be damaged by contact with metal parts, resulting in fire and shocks. Avoid all contact with
hot surfaces when wiring the main unit. High temperatures may damage wiring, causing shorts,
arcing and fires.
Please DO NOT put the product in the damp environment or water, in order to avoid electric
shock, damaged and fire accident caused by a short circuit.
Kindly check all components are in the box when receiving the product. If anything missing,
inform to the supplier/manufacturer.
Start the engine before loading, check the interface whether have function displayed, key control
whether correct, the vehicle interface whether having a scratch. Please give the feedback to the
supplier/manufacturer if there have any questions.
Please note that put the disassembled automotive components in a good way on the installation
process, avoid scratching the instrument panel, the leftovers of connecting cables need to
handle and DO NOT leave it in the car. The connecting plug must be insulated in order to short
circuit.
The cables should be connected in a good way, the vehicle installation space is a little small,
so reduce space usage as far as possible. There should be a good plan about connect cables,
avoid affecting the active component of connecting, such as control components of turning the
steering wheel, throttle and brake pedal. There need to be fastened after connecting cables in
case of a drop.

4
COMPATIBILITY
Offers 3 video in for front/rear view camera and external video device like TV tuner, etc
Support PDC (Parking Distance Control) and FPG (Flexible Parking Guidelines)
Supply pure 12V power to the front and rear view camera
Display front view automatically after shifting from “R” gear
VGA input for specific 360 panoramic system, offers a clearer picture
Support further software update via TF card
Make Models Years Original system
Mercedes-Benz A class 2018- MBUX (NTG 6.0)
with 7 inch screen
FEATURES

5
PACKAGE COMPONENTS
128 mm
83 mm
25 mm
Main Unit
LVDS CableMain power harness

6
CONNECTION DIAGRAM
Provided LVDS cable
OEM head unit
OEM male connector
OEM LVDS cable
Reverse Detect, connect to reversing light if PARKING 12V cable does not output 12V
Rear camera input
Front camera input
DVR video input (video 3), for additional video device like TV tuner, mirroring, etc.
ACC 12V output, supply power for external video device
Parking 12V, Supply 12V power for front & rear camera
POWER
TF 360 VGA
SWITCH
LED LVDS IN LVDS OUT

7
DIP SETTING
DIP ON OFF
1
Selection of car model2
3
4Disable PDC (parking
distance control) Enable PDC
5Disable FPG (flexible
parking guideline) Enable FPG
6Enable DVR (video 3) Disable DVR (video 3)
7
Display front view
camera for 10S
automatically after
shifted from “R” gear
Disable front view
8 —
OFF
ON
NOTE! Please reboot the interface for effective after changing any DIP setting.
2018- A class:
1 OFF, 2 OFF, 3 OFF
Some common DIP shortcuts:
DIP
Function 45678
Aftermarket rear camera
(CAN bus control) OFF OFF OFF OFF OFF
Aftermarket rear camera
(reversing lights control) OFF OFF OFF OFF ON
Factory rear camera OFF ON OFF OFF ON

8
HOW TO ENTER DVR VIDEO IN (VIDEO 3)
OEM UI DVR
(VIDEO 3)
Set DIP 6 down (ON), long press "Hang-up" button on steering wheel for 2S.

Set DIP 6 down (ON), long press "Hang-up" button on steering wheel for 2S.