Metec 806265 User manual

1. Astmelaud / Sideboard step
2. Kronstein / bracket
3. Kronstein / bracket
4. Kronstein / bracket
5. T-polt / T-bolt M8
6. T-polt / T-bolt M10
7. T-polt / T-bolt M10
8. Polt / bolt M10x25 mm
9. Polt / bolt M10x30 mm Wülock
10. Mutter / nut M8 DIN 934
11. Mutter / nut M10 DIN 934
12. Mutter / nut M10 DIN 985
13. Seib / washer 8,4x24x2 mm
14. Seib / washer 10,5x30x2,5 mm
15. Seib / washer 10,5x20x2 mm
16. Vedruseib / spring washer A8
17. Vedruseib / spring washer A10
1+1
1+1
1+1
2
4
2
2
4
12
4
4
16
4
14
10
4
4
www.metec.eeAll Rights Reserved by Tarmetec
Montaažiskeem / Mounting Instructions
Astmelaud Ø 60 / Sideboard step Ø 60
Ford Connect Art. 806265
1 / 2
Vajalikud tööriistad / Required Tools
13
15
17
13
15
17
2
4
3
1
14
13
11
10
17
16
812
9
6
7
5
15
1412

Montaažiskeem / Mounting Instructions
2 / 2
www.metec.eeAll Rights Reserved by Tarmetec
EST ENG
Paigaldamine / Instructions
Pilt 1 / Pic. 1
• Paigalda T-poldid nr. 5.
• Paigalda kronstein nr. 2 (pilt 1).
• Paigaldada T-polt nr. 7 (pilt 2).
• Place T-bolts no. 5.
• Place bracket no. 2 (pic. 1).
• Place T-bolt no. 7 (pic. 2).
Pilt 2 / Pic. 2
EST ENG
Pilt 3 / Pic. 3
• Paigalda kronstein nr. 3 (pilt 3).
• Paigalda kronstein nr. 4 (pilt 4).
• Kinnita astmelaud kronsteinide nr. 2,3
ja 4 külge.
• Reguleeri astmelaua asend ja pinguta
kõik poldid.
• Place bracket no. 3 (pic. 3).
• Place bracket no. 4 (pic. 4).
• Attatch the sideboard step to brackets
no. 2,3 and 4.
• Adjust the position of the sideboard
step and tighten all bolts.
Pilt 4 / Pic. 4
Astmelaud Ø 60 / Sideboard step Ø 60
Ford Connect Art. 806265