METHVEN TAHI User manual

Issue A290416
TAHI SHOWER SYSTEM FOOTREST
INSTALLATION GUIDE
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com or call Customer Service
New Zealand
0800 804 222
Australia
1300 638 483
USA
1800 975 5409
UK
0800 195 1602

Adjust footrest to desired height Mark holes with pencil. Drill clearance into
lining and pre-drill support Seal holes. Attach footrest cap. Drive in screws
(and wall plugs if appropriate). Clip on cover.
CHROME COVER REMOVAL TOOL
321
The cover removal tool is supplied to make it
easier to gain access to the mounting screws.
To remove the desired cover, position the tool
level with a clip as indicated by the arrows in
the image.
Use the curved end of the tool to hook under
the cover and lever it off the bracket. Repeat
this step from the top to the bottom of each
side of each cover until the cover releases.
Comfortable
Height
for User