Metra Electronics MTLTB01 User manual

Electronic Lock Battery Tester User Manual

Page 2
Electronic Lock Battery Tester User Manual
Table of contents
Electronic Lock Battery Tester User Manual........................................................................................... 3
Product description............................................................................................................................. 3
Basic Parts ........................................................................................................................................... 4
User Interface...................................................................................................................................... 4
Operating indicator............................................................................................................................. 5
Electronic Lock Testing........................................................................................................................ 5
Closing Locker................................................................................................................................. 5
Opening Locker (single unlocking operation)................................................................................. 6
Opening Locker (10 times in a row unlocking operation) .............................................................. 6
Replacing Batteries ............................................................................................................................. 6
Technical data ..................................................................................................................................... 7

Page 3
Electronic Lock Battery Tester User Manual
Electronic Lock Battery Tester User Manual
Manufacturer:
Metra inženiring d.o.o.
IOC Trzin
Špruha 19
SI-1236 Trzin, Slovenia
phone:
fax:
web:
[phone]
[phone]
www.metra.si
System:
Metra ELS –Electronic Locking System
Product Group:
Electronic Lock Tester
Types:
MTLTB01
Year of Construction:
2008
Declaration of Conformity:
The Metra ELS products have been developed, designed and
manufactured in accordance with the EU directive for Electromagnetic
Compatibility (2004/108/EC).
Electronic Lock Battery Tester User Manual [rev.2-290415]
2015 Metra inženiring d.o.o.
All Rights reserved.
No part of this manual may be reproduced in any form or by any means without prior written permission of Metra inženiring d.o.o.
The contents of this manual are subject to change without notice.
All efforts have been made to ensure the accuracy of the contents of this manual, however, should any errors be detected, Metra inženiring would greatly appreciate being informed of
them. Metra inženiring d.o.o. can assume no responsibility for any errors in this manual.
Product description
Metra Electronic Lock Battery Tester is
intended for locker manufacturers as a
reliable testing tool used during
manufacturing process and personnel making
locker installations on the field. It is powered
by four 1.5 volt AA Alkaline batteries. One
Metra Electronic Lock can be connected to
tester at a time. Tester performs
locking/unlocking procedure as well as
checking proper cable connection. It is most
commonly used during the installation
procedure when all the Electronic Locks are
mounted and cable connectors crimped. Test
procedure is done before connecting cables to
central Control Unit/Locker Controller.
In addition user can also lock or unlock all the
lockers. This feature is useful for
transportation of assembled lockers.

Page 4
Electronic Lock Battery Tester User Manual
Basic Parts
#
description
#
description
1
NO signal
4
6 pole Electronic Lock connector
2
OK signal
5
ON / OFF switch with OPERATE signal
3
Button
User Interface
Electronic Lock Battery Tester user interface uses optical signals (#1, #2 and #5) to inform the user
about operation progress. Signals are explained in the tables below.
OK signal (green)
state
description
on
Operation completed successfully
flashing
Operation in progress
NO signal (red)
state
description
on
Operation failed
OPERATE signal (green)
state
description
on
Device is running

Page 5
Electronic Lock Battery Tester User Manual
Operating indicator
When the device is running a green OPERATE signal light is ON.
Electronic Lock Testing
Turn ON the device
Connect the 6 pole flat cable from the Electric Locker to
the device.
Closing Locker
Close the Locker door. If operation is successful “OK”
optical signal turns on for 3 seconds.
NOTE 
If Locker door does not lock –operation fails and “NO”
signal lights up for 3 seconds. Check the cable
connections and Electronic Lock installation.

Page 6
Electronic Lock Battery Tester User Manual
Opening Locker (single unlocking operation)
Press the button to open the Locker Door. If operation is
successful “OK” optical signal turns on for 3 seconds.
NOTE 
If Locker door does not open –operation fails and “NO”
signal lights up for 3 seconds. Check the cable
connections and Electronic Lock installation.
Opening Locker (10 times in a row unlocking operation)
Function used when Locker door gets jammed and does
not unlock with single open signal.
Press and hold the button for 3 seconds until the 10 times
in a row unlocking operation starts and the “OK” signal
light starts flashing.
NOTE 
If Locker door does not open after 10 attempts –
operation fails and “NO” signal lights up for 3 seconds.
Try repeating the operation and slightly push in the
Locker door in the area of the door strike.
Replacing Batteries
Open the battery compartment door.

Page 7
Electronic Lock Battery Tester User Manual
Replace all 1,5V AA batteries. Pay attention on battery
orientation.
CAUTION 
Use only 1,5V Alkaline or Ni-Mh batteries to avoid battery
leaks.
Technical data
Operating voltage
6 V DC –four 1.5V AA batteries
Current consumption
0.05 A standby / 1.2 A max
Operating temperature range
+5 to +40 °C
Dimensions in mm (w/h/l)
96/36/160