Miboxer S1B+ User manual

Subordinate New Brand
Model No.: S1B+ / S1W+
2.4G Sunrise Remote (Color Temperature)

This product adopt world-wide used 2.4GHz frequency, GFSK control method, with features of
low power consumpon, long distance transming, strong an-interference and fast
comunicaon rate. It can control color temperature and brightness of Mi-Light / MiBoxer 2.4G
smart light.
Features
Install The Baery For Remote
Note: 2*AAA Baery need to buy seperately
1. Open baery cover
behind remote.
2. Install baery correctly and
close baery cover.
Product specificaons
Model No.: S1B+ / S1W+
Operang voltage: 3V (2 x AAA baeries)
Transmit power: 6dBm
Standby power consumpon: 20μA
Transmission frequency: 2400-2483.5MHz
Modulaon method: GFSK
Control distance: 30m
24mm70mm

Buon Diagram
Touch ring: brightness, color temperature, use together.
(It turns to adjust brightness by default if remote is not operated for 3 seconds)
Turn on lights /
Link / Unlink
Brightness
All zones
Zone-1 Zone-2 Zone-3 Zone-4
Turn off lights
Color temperature
Short press key once, then touch to adjust color temperature
Adjust color temperature
Short press key once, then touch to adjust brightness.
Adjust brightness
Group key, once selected, can control the connected lights in the
corresponding group.
1-4 Zones
Master group key, once selected, can control all connected lights.
All zones

Linking Code / Unlinking Code Instrucons
Linking Code Instrucons
Link/Unlink
buon
Switch off light, aer
10 seconds then
switch on again.
Short press " ON " buon
3 mes within 3 seconds
when light on.
Lights blink 3 mes
slowly means linking
is done successfully.
Linking failed if light is not blinking slowly, Please
follow above steps again. (Note: Light that have linked
can't link again)
321
4
Power Light
You can control lights aer linking remote with light.
Click the Zone buon
you want to pair (e.g.,
Zone-1)
Zone-1
Power Light
Unlinking Code Instrucons
Link/Unlink
buon
Switch off light, aer
10 seconds then
switch on again.
Short press " ON " buon
5 mes within 3 seconds
when light on.
Lights blink 10 mes
quickly means
unlinking is done
successfully.
Unlinking failed if light is not blinking quickly, Please
follow above steps again. (Note: Light haven't linked
that don't need to unlink)
321
4
Power Light
Click the Zone buon
you want to pair (e.g.,
Zone-1)
Zone-1
Power Light

Made in China
Group control instrucon
Link the lights to different zones for flexible control of lighng in each zone.
Zone control method: Press the zone key (e.g., Zone 1) and then adjust the dimming. Here are
some examples of zone control.
Aenon:
1. Countless lights can be added into each zone.
2. One light only can be paired with one sub zone from anyone remote.
1. This remote only support Mi-Light /Miboxer 2.4G product series, kindly review light instrucon
to check compability.
2. In the using of the remote, if the indicated lamp blinking quickly, Please change the baery in
me. Please don’t use poor quality baery to avoid the leaking of baery liquid to damage the
remote.
3. The remote is accurate electronics, don’t use it in humid or high temperature area, remove
baery and keep it in dry or free stac electricity environment.
4. Please don’t use the remote on the wide-range metal or strong electromagnec wave area,
otherwise, it will badly affect the controlling distance.
Aenon
1 2 3 1 12
Lights blink 10 mes
quickly means
unlinking is done
successfully.