Miboxer B8 User manual

Model No.: B8
8-Zone Panel Remote (RGB+CCT)
Subordinate New Brand

Parameters
Model No.: B8
Working Voltage: 3V(2*AAA Battery)
/ DC3.3V
Transmitting Power: 6dBm
Standby Power: 30uA
Transmission Frequency: 2.4GHz
Modulation Method: GFSK
Control Distance: 30m
Working Temp.: -20~60℃
Size: 106*146*20mm
Features
Panel Remote
Name
Compatible
Remote Model Compatible Products
8-Zone Panel Remote
( RGB+CCT )
RGB+CCT series
LED Bulb series
LED Floodlight series
5 in 1 Smart LED Conrtoller
FUT089
146mm
106mm
20mm
This 8-zone panel remote is made of elegant stalinite panel and
high-precision touching IC; touching is more stable and
sensitive. And adopt world-wide used 2.4GHz frequency, GFSK
control method, with the features of low power consumption, long
distance transmitting, strong anti-interference and fast
comunication rate; can control specified Mi-Light/MiBoxer smart
light with color, color temperature, saturation and brightness
changing.

Function of keys
Remark:
When touching the button, LED indicating lamp will
flash once with different sound(Touch slider with no sound).
Mode
Speed+
Mode
Speed-
Dimming
Slider
White
Mode
Color Ring
60S
Delay OFF
8-zone
All zones
Saturation
/ CCT Control

Press the button to get white light.
Slide the brightness slider to adjust the brightness.
Touch the color ring to change colors.
Under white light mode, adjust color temperature;
Under color light mode, change color saturation.
Dynamic mode switching button.
Lower the dynamic mode speed.
Accelerate the dynamic mode speed.
Press “ALL” button, to control all linked lights, and the
indicating lamp shine meanwhile.
Press 1-8 zone, to control the corresponding
zone linked lights, and indicating lamp will shine.
Press the button, to open the “60S delay ” Function, the
indicating lamp will shine; Press again cancel the “60S
delay” Function, the indicating lamp will be off.
...
Turn on the linked lights. Long press “ON” button for
10 seconds to set up the button sound.
Turn off the linked lights. Long press “OFF” button for
10 seconds to close the button sound.

Installation/ Dismantlement
Installation
3V(2*AAA Battery)
+
Input 1:
Input 2:
AC90~120V
or AC180~240V
DC 3.3V
Power
Supply
-
MiBoxer specified power supply
need to be purchased separately.

Dismantling
Attention
1. Please check the cable, and make the circut is correct before power on.
2. When installation, pls handle with care to avoid the broken of the
glass panel.
Made in China

Link/
Unlink
button
Linking Instructions
If the light not blink slowly, the linking failed, Pls switch off the light
again, and follow the above steps again.
When the light on, short
press " " 3 times
within 3 seconds
3
Click the 1-8 zones button you
want to link, the corresponding
indicating lamp will shine.
1
The light blink 3 times slowly
means the linking is done
successfully.
4
Switch off the light, after 10
seconds switch on again
2
Power
Power

Unlinking Instructions
Click the 1-8 zones button you
want to unlink, the corresponding
indicating lamp will shine.
1Switch off the light, after
10 seconds switch on
again.
2
Power
Link/
Unlink
button
If the light not blink quickly, the unlink failed, pls switch off the light
again, and follow the above steps to unlink again.
When the light on, short
press " " 5 times
within 3 seconds
3
The light blinking 10 times
quickly, means the
unlinking successfully.
4
Power
Unlinking must be the same
zone with the Linking