Microsoft XBOX User manual

Microsoft Wireless Controller Troubleshooting:
Controller Won't Connect to Console
I want to navigate my Xbox One, but my controller refuses to connect or will not stay connected
for long.
Low Batteries
Your batteries may be low. If the batteries are low, the controller's wireless signal strength may
be weak and therefore will not connect to the console. You are going to want to replace your
batteries or charge the controller.
Parts: AA Batteries for Xbox One, Xbox One Controller Charging Cable
Tools required: None
Another Wireless Device Is Interfering
A conflicting signal may be responsible for connectivity issues. Consider turning off nearby
wireless devices and reconnecting the controller.
Too Many Controllers Are Connected
Make sure you do not have more than eight controllers connected. That is the limit for the Xbox
One console.
Controller Inactivity
If you set down your controller for longer than fifteen minutes and then come back to an
unresponsive controller, you may need to turn the controller back on.
Controller Is Out Of Range
Your Xbox One Controller signal has a range of 30 feet (9.1 meters). Make sure you are within
this range.

Controller Is Not Synced
If you sync your controller to another device, you will need to re-sync it back to your console. To
do this, turn on the Xbox One and hold down the sync button on your controller. Simultaneously,
hold down the sync button on your console until the light on your controller begins to flash at a
rapid pace. Once this happens, release both sync buttons. Your controller should now be
connected after about five to ten seconds.
Mic Preventing Connection
Some people have reported that the controller will not connect with the headset mic plugged in.
Unplug the mic, and reconnect. Sync if necessary. Plug the mic back in after establishing a
connection.
Controller Will Not Turn On
No matter how many times I try to connect or sync my controller, it will not turn on.
Low Batteries
Your batteries may be low. If the batteries are low, the controller's wireless signal strength may
be weak and therefore will not connect to the console. You are going to want to charge you
batteries. If the batteries will not charge, or drain too quickly, replace your batteries.
Parts: AA Batteries for Xbox One, Xbox One Controller Charging Cable
Tools required: None
Low Battery Pack
Your battery pack may be completely drained. Plug the controller into the console using a USB
cord. To check on how charged the battery is, press the Xbox button to go to the home screen
where the charge will be displayed in the bottom right corner.
If the pack will not charge, or drains too quickly, you can get replacement battery packs.
Part: Battery pack for Xbox One

Tools required: None
Defective Charge Cable
Your charging cable may be defective and will not charge your controller at all. If this is the
case, you will need to buy a new cord.
Part: Xbox One Controller Charging Cable
Tools Required: None
Sticky Buttons
One or more of the buttons on my controller takes longer than usual to pop back up.
Dirt Build Up
There could be minor dirt build up or sugary drink residue within your controller. You're going
to want to see our Buttons Replacement Guide so you can get to get to your buttons to clean
them, or replace the covers or gasket.
Parts: Button gasket, Button covers, alcohol cleaning pads
Tools required: T6 Torx, TR8 Torx, Spudger, tweezers (recommended) Replacing the
switches themselves requires replacing the main board.
Part: Xbox One Controller (1537) Motherboard
Tools: T6 Torx, TR8 Torx, Spudger, soldering station tweezers (recommended)
Malfunctioning Thumbstick
I cannot properly navigate my Xbox One.

Residue Build Up
Your thumbstick may be sticking or not rotating properly. Check out the Thumbstick
Replacement Guide so you can get to your thumbsticks and clean them or replace the thumb
stick covers.
Part: Thumbstick cover
Tools Required: TR8 Torx, Spudger
If this does not fix the problem, the thumbstick mechanism may be faulty meaning you should
replace the secondary board.
Part: Xbox One Controller (1537) Midframe Assembly and control board, Xbox One
Controller (1697) Midframe Assembly and control board
Tools: T6 Torx, TR8 Torx, Spudger, soldering station tweezers (recommended)
Broken Thumbsticks
It is possible that you have have been gaming a little too hard and one or both of your
thumbsticks are bent or broken. Look at our Thumbstick Replacement Guide to see how you can
get back to your hardcore gaming habits in no time.
Part: Thumbstick cover
Tools Required: TR8 Torx, Spudger
If cleaning or replacing the thumbstick covers does not fix the problem, the thumbstick
mechanism may be faulty meaning you should replace the main board.
Controller Won't Vibrate
When I am playing games, my controller refuses to vibrate.
Vibration Setting Not Enabled
Make sure your vibrations setting is enabled. This can be done in the settings of the game you
are playing.

Low Batteries
If your batteries are low, the controller may not vibrate in an effort to save battery life. Replace
the batteries or charge your controller.
Parts: AA Batteries for Xbox One, Xbox One Controller Charging Cable
Tools required: None
Vibration May Not Be Supported By The Game
Try using another controller on the game that you are playing. If the controller is still not
vibrating, the game most likely does not support this option.
Vibration Motor is Defective
If you have tried everything above and your controller still refuses to vibrate, there may be
something wrong with the vibration motor. Get ready to grab a screw driver, you're going to
need it for the Trigger Rumble Motor Replacement Guide. This guide requires soldering.
Part: Xbox One controller trigger vibration motor
Tools required: T6 Torx, TR8 Torx, Spudger, soldering station tweezers (recommended)