Microtronics Blue Force User manual

n
n
It is : thanks to only
two buttons, it is possibile to scroll
saved tests, view parameters,
delete them, transmit diagrams,
remake measurements, etc.
Blue Force has two working modes:
thanks to the internal memory, it
can work in ,
saving up to 50 tests, and showing
directly on led-display the four main
parameters (Fd, Td, Fs, Fe) for each
measure.
simple to use
autonomous manner
n
n
Besides, thanks to the special mode PCLINK and the Bluetooth® technology, the Blue Force
can work together with a PocketPC or a PC,
and showing directly the !
For the coupling with a PocketPC (optional), Microtronics proposes an appropriate
, that includes the software BlueForcePDA pre-installed and ready to be used.
displaying immediately the force diagram
final result of the test
Kit
Pocket-PC
n
n
n
n
Speed Force maintains the same mechanical characteristics of the more famous
, locating itself in a zone.
Connect Speed Force to a PC is very easy, because it works with with .
Of course, like Blue Force, it is possible to turn 180° and upside down the handle, to
make is suitable for every measurement.
On the rear of Instruments, it is present a special seat, that permits to fix the
extensions-accessories (optionals), together with the handle in its original position.
Blue
Force lower cost/use
USB port
Made in Italy www.microtronics.it [email protected]
Blue F
orce
50 mm.
Ø 80 mm.
280 mm.
Speed F
orce
n
nMicrotronics proposes an instrument that is unique in its kind, because it makes use of ® technology, that allows
with PC, notebook, or !
Bluetooth
wireless connection PocketPC
Blue Force is a measuring instrument for impact forces on automatic closures, based on norms.EN 12445 / EN 12453
TECHNICAL DATA:
n
n
n
n
n
n
n
n
n
n
n
n
DIMENSIONS: 280mm. X 80mm. X 50mm. (WxDxH) ± 5%
WEIGHT: 1,8 Kg ± 10%
POWER: standard 9V battery
BLUEFORCE INTERFACE: BLUETOOTH - USB 1.1
SPEEDFORCE INTERFACE: USB 1.1
MEASURE TIME INTERVAL: 6 sec. sampling 1Ksmp/s
CURRENT ABSORBED: min. 4mA, average 12mA, max. 80mA
FORCE RANGE: 0 ÷ 2000 N (mechanical block on 2100N)
ACCURACY from : 1% E.O.S.
ACCURACY from : 2% E.O.S.
ACCURACY from : 4% E.O.S.
ACCURACY from : 5% E.O.S.
da 0 a 400 N
da 400 a 1000 N
da 1000 a 1400 N
da 1400 a 2000 N
®

Made in Italy www.microtronics.it [email protected]
nThe materials used for manufacturing are the right balance between: praticality, lightness and usability (Anodized Aluminium,
Steel and Plastic Polymer).
nLinear Extension nAngular Extension
nDetail: juncion of angular accessory (on the right), rapid joint (on center), extended handle (on the left).
n
n
n
n
During the use, the instrument has to be supported in way to not alter the results of
measures.
The optional accessories, (thanks to the fast-joint mechanism), permit to carry out
measures by using only one hand, while with the other hand it is possible to drive the
opening/closing device.
Two versions are available:
The Linear Extension, for measures at 30 or 50 cm. and Angular Extension, for measures
from 0,5 mt. to 2,5 mt.
Accessories