Midea MSOPBU-09HRFN8-QRE6GW User manual

User manual Innova IMRZ
1
ENGLISH
USER MANUAL
MSOPBU-09HRFN8-QRE6GW(Indoor unit)
MOB30-09HFN8-QRE6GW(Outdoor unit)
MSOPBU-12HRFN8-QRE6GW (Indoor unit)
Thank you for choosing Midea

User manual Innova IMRZ
2
ENGLISH
Table of Contents
SAFETY REGULATIONS
READ SAFETY REGULATIONS BEFORE INSTALLATION
Incorrect installation due to ignoring instructions can cause serious damage or injury.
The seriousness of potential damage or injuries is classied as either a WARNING or CAUTION
Warnings and their meaning:
WARNING: This symbol indicates that ignoring instructions may cause death or serious injury.
CAUTION: This symbol indicates that ignoring instructions may cause moderate injury to your
person, or damage to your appliance or other property.
Safety Regulations 2
Specications 5
Remote Controller Specications 7
Manual Operation Without Remote 23
Care and Maintenance 24
European Disposal Guidelines 28
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
WARNING!

User manual Innova IMRZ
3
ENGLISH
INSTALLATION WARNINGS
• Ask an authorized dealer to install this air conditioner. Inappropriate installation may cause water
leakage, electric shock, or re.
• All repairs, maintenance and relocation of this unit must be performed by an authorized service
technician. Inappropriate repairs can lead to serious injury or product failure.
WARNINGS FOR PRODUCT USE
• If an abnormal situation arises (like a burning smell), immediately turn off the unit. Call your dealer
for instructions to avoid electric shock, re or injury.
• Do not insert ngers, rods or other objects into the air inlet or outlet. This may cause injury, since
the fan may be rotating at high speeds.
• Do not use ammable sprays such as hair spray, lacquer or paint near the unit. This may cause re
or combustion.
• Do not operate the air conditioner in places near or around combustible gases. Emitted gas may
collect around the unit and cause explosion.
• Do not operate the air conditioner in a wet room (e.g., bathroom or laundry room). This can cause
electrical shock and cause the product to deteriorate.
• Do not expose your body directly to cool air for a prolonged period of time.
• Do not use an extension cord or connect the unit to a wall outlet. This can cause overheating, re
or shock.
CLEANING AND MAINTENANCE WARNINGS
• Turn off the device and pull the plug before cleaning. Failure to do so can cause electrical shock.
• Do not clean the air conditioner with excessive amounts of water.
• Do not clean the air conditioner with combustible cleaning agents. Combustible cleaning agents can
cause re or deformation.
CAUTION
• If the air conditioner is used together with burners or other heating devices, thoroughly ventilate
the room to avoid oxygen deciency.
• Turn off the air conditioner and unplug the unit if you are not going to use it for a long time.
• Turn off and unplug the unit during storms.
• Make sure that water condensation can drain unhindered from the unit.
• Do not operate the air conditioner with wet hands. This may cause electric shock.
• Do not use device for any other purpose than its intended use.
• Do not climb onto or place objects on top of the outdoor unit.
• Do not allow the air conditioner to operate for long periods of time with doors or windows open, or
if the humidity is very high.

User manual Innova IMRZ
4
ENGLISH
EXPLANATION OF SYMBOLS DISPLAYED
ON THE INDOOR UNIT OR OUTDOOR UNIT
WARNING This symbol shows that this appliance used a ammable refrigerant. If the refrigerant is leaked and exposed to an
external ignition source, there is a risk of re.
CAUTION This symbol shows that the operation manual should be read
carefully.
CAUTION
This symbol shows that a service personnel should be handling
this equipment with reference to the installation manual.
CAUTION
CAUTION This symbol shows that information is available such as the
operating manual or installation manual.
SPECIFICATIONS
Model Indoor unit model designation MSOPBU-09,12HRFN8
Outdoor unit model designation MOB30-09,18HFN8
Indoor unit - dimensions W x D x H (mm) 895x248x298
Outdoor unit - dimensions W x D x H (mm) 800x333x554
Power supply ~/N, 230 V, 50 Hz
Refrigerant R32
Amount of refrigerant 0,87 kg
The total global warming potential 675
CO2 equivalent 0,587 t

User manual Innova IMRZ
5
ENGLISH
SPECIFICATIONS
DISPLAY CODE MEANINGS
Displays temperature, operation feature and Error codes:
for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
when anti-cold air feature is turned on
when defrosting
when unit is self-cleaning
when 8 degree heating mode is turned on
when ECO feature is activated
when wireless control feature is activated (option)
indicates the current operation power
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
Press the LED button on the remote control will turn off the display screen.
Press the LED button again will display the room temperature, press it the third time will display the
current operation power, press it the fourth time will revert back to display the setting temperature.
Front panel
Display window
The unit has a build-in light sensor to
detect the ambient brightness. When
the light is turned off, the display will
dim down gradually, saving energy
and offering you a comfortable sleep.
Remote
Control Remote Control
Holder
Intelligent eye
Catalyst Filter
(On Front of Main Filter)
Louver

User manual Innova IMRZ
6
ENGLISH
ACHIEVING OPTIMAL PERFORMANCE
Optimal performance for the COOL, HEAT, and DRY modes can be achieved in the following
temperature ranges. When your air conditioner is used outside of these ranges, certain safety
protection features will activate and cause the unit to perform less than optimally.
MODE COOL HEAT DRY
Room temperature 16°C - 32°C
(60°F - 90°F) 0°C - 30°C (32°F - 86°F) 10°C - 32°C (50°F - 90°F)
Outdoor temperature
0°C - 50°C
(32°F - 122°F)
-30°C - 30°C
(-22°F - 86°F) 0°C - 50°C (32°F - 122°F)
-15°C - 50°C
(5°F - 122°F)
(For models with
low temp. cooling
systems.)
0°C - 60°C
(32°F - 140°F)
(For special tropical
models)
0°C - 60°C
(32°F - 140°F)
(For special tropical
models)
FOR OUTDOOR UNITS WITH AUXILIARY ELECTRIC HEATER
When outside temperature is below 0°C (32°F ), we strongly recommend keeping the
unit plugged in at all time to ensure smooth ongoing performance.
To further optimize the performance of your unit, do the following:
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air lters.

User manual Innova IMRZ
7
ENGLISH
REMOTE CONTROLLER SPECIFICATIONS
Model: RG66B3(2H)/BGEF
Rated Voltage: 3,0 V (Dry batteries R03/LR03)
Signal Receiving Range: 8m
Environment: −5 till 60 °C
• Buttons design in based on typical model
and might be slightly different from the
actual one you purchased the actual shape
shall prevail.
• All the functions described are
accomplished by the unit. If the unit has
no this feature, there is no corresponding
operation happened when press the
relative button on the remote controller.
NOTE!

User manual Innova IMRZ
8
ENGLISH
FUNCTION BUTTONS
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use The Basic/Advance Functions section of this
manual.
ON/OFF
Tryck på knappen för att starta eller
stänga avenheten.
FAN (FLÄKT)
Selects fan speeds in the following
order:
AU% 20% 40% 
60% 80% F% (100%).
Press the Adjust + or - button to
increase/decrease the fan speed in
1% increments.
TEMP+
Increases temperature in 0.5°C (1°F)
increments. Hold down this button
to increase temperature in 1°C (1°F)
increments. Max. Temperature is
30°C (86°F).
TEMP-
Decreases temperature in 0.5°C (1°F)
increments. Hold down this button to
decrease temperature in 1°C (1°F)
increments. Min. temperature is
16°C (60°F).
SWING
Starts and stops horizontal louver
movement.
SWING
Starts and stops vertical louver
movement.
SELF CLEAN
Starts and stops the unit self clean
feature.
MODE
Scrolls through operation modes as
follows:
AUTO COOL DRY HEAT FAN
ECO/SLEEP
Starts and stops energy efcient feature.
If hold down this button for more than
2 seconds, the sleep feature is activated.
TIMER/SLEEP
Sets timer to turn unit on and off (see for
instructions) How to Use Basic Functions.
LED
Turns indoor units LED display on and off.
FOLLOW ME
Press the button to activate/deactivate
FollowMe function or to display the room
temperature.
TURBO
Enables unit to reach preset temperature
in shortest possible time.
INTELLIGENT EYE
Detects the people activities
in the room.

User manual Innova IMRZ
9
ENGLISH
HANDLING THE REMOTE CONTROLLER
NOT SURE WHAT A FUNCTION DOES?
Refer to the and How to Use Basic Functions and How to Use
Advanced Functions sections of this manual for a detailed
description of how to use your air conditioner.
SPECIAL NOTE
• Button designs on your unit may differ slightly from the example
shown.
• If the indoor unit does not have a particular function, pressing
that function s button on the remote control will have no effect.
INSTALLING REMOTE CONTROL HOLDER
The remote controller can be attached to a wall or stand by using a
remote controller holder.
1. Before installing the remote controller, check that the air
conditioner receives the signals properly.
2. Install the holder with two screws.
3. Put the remote controller in the holder.
INSERTING AND REPLACING BATTERIES
Your air conditioning unit comes with two AAA batteries. Put the
batteries in the remote control before use:
1. Remove the back cover from the remote control, exposing the
battery compartment.
2. Insert the batteries, paying attention to match up the (+) and
(-) ends of the batteries with the symbols inside the battery
compartment.
3. Install the back cover on.
BATTERY NOTES
For optimum product performance:
• Do not mix old and new batteries, or batteries of different types.
• Do not leave batteries in the remote control if you don’t plan on
using the device for more than 2 months.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted municipal waste. Refer to
local laws for proper disposal of batteries.
Put the
remote
controller
in the
holder.

User manual Innova IMRZ
10
ENGLISH
REMOTE LCD SCREEN INDICATORS
Information are displayed when the remote controller is powered up.
NOTE! All indicators shown in the gure are for the purpose for explanatory presentation. But during
the actual operation only the relative functional signs are shown on the display window.
ON/OFF display
Appears when the unit is turned on, and
disappears when the it is turned off
Transmission Indicator
Lights up when remote sends signal
to indoor unit
MODE display
Displays the current mode: Battery display
Low battery detection
Fan Speed display
Displays selected fan speed:
Temperature/Timer/Fan speed
display
Displays the set temperature by default,
fan speed or timer setting when using
TIMER ON/OFF functions
• Temperature range:
16–30 °C (60–86 °F)
• Timer setting range:
0–24 hours
• Fan speed setting range:
AU–F %
This display is blank when operating in
FAN mode.
TIMER ON display
ON Displays when TIMER
ON is set
TIMER OFF display
OFF Displays when TIMER
OFF is set
Horizontal louver auto swing display
Vertical louver auto swing display
Wind ow follow people
Wind ow away from people
Turbo mode display
LOCK feature display
Displays when ECO feature is activated
This fan speed can not be
adjusted in AUTO or DRY mode.
Silence feature
display
FOLLOW ME
Not available
for this unit
Not available for
this unit
Not available for
this unit
Sleep mode
display

User manual Innova IMRZ
11
ENGLISH
HOW TO USE THE BASIC FUNCTIONS
SETTING TEMPERATURE
The operating temperature range for units is 16–30°C/60–
86°F. You can increase or decrease the set temperature in
0.5°C/1°F increments.
AUTO OPERATION
In AUTO mode, the unit will automatically select the COOL,
FAN, HEAT or DRY mode based on the set temperature.
1. Press the button to select Auto mode.
2. Set your desired temperature using the TEMP + or TEMP
– button.
3. Press the ON/OFF button to start the unit.
NOTE! FAN SPEED can’t be set in Auto mode.
COOL OPERATION
1. Press the MODE button to select COOL mode.
2. Set your desired temperature using the TEMP + or TEMP
– button.
3. Press the FAN button to select the fan speed in a range of
Au%–F%, in conjunction with TEMP + or TEMP – button.
4. Press the ON/OFF button to start the unit.

User manual Innova IMRZ
12
ENGLISH
DRY OPERATION (DEHUMIDIFYING)
1. Press the MODE button to select DRY mode.
2. Set your desired temperature using the TEMP + or TEMP
– button.
3. Press the ON/OFF button to start the unit.
NOTE! FAN SPEED can’t be set in Auto mode.
FAN OPERATION
1. Press the MODE button to select FAN mode.
2. Press the FAN button to select the fan speed in a range of
Au% – F%, in conjunction with TEMP + or TEMP – button.
3. Press the ON/OFF button to start the unit.
NOTE! You can’t set temperature in FAN mode. As a
result, your remote control’s LCD screen will not display
temperature.

User manual Innova IMRZ
13
ENGLISH
HEATING OPERATION
1. Press the MODE button to select HEAT mode.
2. Set your desired temperature using the TEMP + or TEMP
-button.
3. Press the FAN button to select the fan speed in a range of
Au% – F%, in conjunction with TEMP + or TEMP – button.
4. Press the ON/OFF button to start the unit.
NOTE! As outdoor temperature drops, the performance of
your unit’s HEAT function may be affected. In such
instances, we recommend using this air conditioner
in conjunction with other heating appliance.
SET THE ANGLE OF AIR FLOW
When the unit is on, press the swing button, to activate
the louver. Each time you press the button, it will adjust the
louver by 6°. Press the button until the direction you prefer
is reached. If press and hold this button for more than 2
seconds, the louver will swing up and down continuously.
When the unit is on, press the swing button, to activate
the louver.
Each time you press the button, it will adjust the louver by
6°. Press the button until the direction you prefer is reached.
If press and hold this button for more than 2 seconds, the
louver will swing left and right continuously.

User manual Innova IMRZ
14
ENGLISH
SETTING THE TIMER FUNCTION
Your air conditioning unit has two timer-related
functions:
• TIMER ON - sets the amount of timer after which
the unit will automatically turn on.
• TIMER OFF- sets the amount of time after which
the unit will automatically turn off.
TIMER ON function
The TIMER ON function allows you to set a period of
time after which the unit will automatically turn on,
such as when you come home from work.
1. Press the button, the Timer on indicator ON
displays and ashes. By default, the last time
period that you set and an “h” (indicating hours)
will appear on the display.
Note: This number indicates the amount of time
after the current time that you want the unit to
turn on. For example, if you set TIMER ON for 2.5
hours, ”2.5h” will appear on the screen, and the
unit will turn off after 2.5 hours.
2. Press the Temp + or Temp – button repeatedly to
set the time when you want the unit to turn on.
3. Wait 3 seconds, then the TIMER ON function will
be activated. The digital display on your remote
control will then return to the temperature
display.
4. The ON indicator remains on and this function
is activated.
Example:
Setting unit to turn on after 2.5 hours.

User manual Innova IMRZ
15
ENGLISH
TIMER OFF function
The TIMER OFF function allows you to set a period of
time after which the unit will automatically turn off,
such as when you wake up.
1. Press the button, the Timer off indicator OFF
displays and ashes. By default, the last time
period that you set and an “h” (indicating hours)
will appear on the display.
Note: This number indicates the amount of time
after the current time that you want the unit to
turn off. For example, if you set TIMER OFF for 5
hours, ”5.0h” will appear on the screen, and the
unit will turn on after 5 hours.
2. Press the Temp + or Temp – button repeatedly to
set the time when you want the unit to turn off.
3. Wait 3 seconds, then the TIMER OFF function will
be activated. The digital display on your remote
control will then return to the temperature
display.
4. The OFF indicator remains on and this function
is activated.
Example:
Setting unit to turn off after 5 hours.
NOTE! When setting the TIMER ON or TIMER OFF functions, up to 10 hours, the time will increase
in 30 minute increments with each press. After 10 hours and up to 24, it will increase in 1 hour
increments. The timer will revert to zero after 24 hours. You can turn off either function by setting its
timer to “0.0h”.

User manual Innova IMRZ
16
ENGLISH
Setting both TIMER ON and TIMER OFF at the same time
Keep in mind that the time periods you set for both functions refer to hours after the current time. For
example, say that the current time is 1:00 PM, and you want the unit to turn on automatically at 7:00
PM. You want it to operate for 2 hours, then automatically turn off at 9:00 PM.
Do the following:

User manual Innova IMRZ
17
ENGLISH
Example:
Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off (see the gure below)
Timer is set To turn ON
6 hours from current time
Timer is set to turn OFF
8 hours from current time
Timer
starts
Current time
UNIT
turns ON
UNIT
turns OFF

User manual Innova IMRZ
18
ENGLISH
HOW TO USE THE ADVANCED FUNCTIONS
ECO
Note! This function is only available under COOL mode.
• Used to enter the energy efcient mode.
• Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24°C, fan speed of Auto to save energy(but only if the set temperature is less than
24°C). If the set temperature is above 24°C , press the ECO button, the fan speed will change to
Auto, the set temperature will remain unchanged.
• Note! Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24°C will stop ECO operation.
• Under ECO operation, the set temperature should be 24°C or more. It may result in insufcient
cooling. If you feel uncomfortable, just press the ECO button again to stop it.
SLEEP function
The SLEEP function is used to decrease energy use while you sleep (and don t need the same
temperature settings to stay comfortable). This function can only be activated via remote control. For
the detail, “see sleep” operation in “USER S MANUAL”.
NOTE! The SLEEP function is not available in FAN or DRY mode.
FOLLOW ME
The Follow me function enables the remote control to measure the temperature at its current location
and send this signal to the air conditioner every 3 minutes interval. When using AUTO, COOL, or HEAT
modes, measuring ambient temperature from the remote control (instead of from the indoor unit itself)
will enable the air conditioner to optimize the temperature around you and ensure maximum comfort.
Silence function
Hold down Fan speed button for 2 seconds to activate/cancel
Silent mode. Due to low frequency operation of compressor, it
may result in insufcient cooling and heating capacity.
(applicable to the air conditioner with Silent feature only)
8°C Heating Function
When the air conditioner operates under heating mode with
the set temperature of 16°C, press Temp button twice in
one second will activate 8 Degree heating function. The unit
will operate at a setting temperature of 8°C. The indoor unit
display shows “FP”.
Hold down
Fan button for
2 seconds to
activate
Silence
function.
Press this
button twice
in one second
to activate
8°C heating
function.

User manual Innova IMRZ
19
ENGLISH
TURBO
The TURBO function makes the unit work extra hard to reach your present temperature in the shortest
amount of time possible.
• When you select feature in COOL mode, the unit will blow cool air with strongest wind setting to
jump-start the cooling process.
SELF CLEAN (SJÄLVRENGÖRING)
Airborne bacteria can grow in the moisture that condenses around heat exchanger in the unit.
With regular use, most of this moisture is evaporated from the unit. When the Self clean feature is
activated, your unit will clean itself automatically. After cleaning the unit will turn off automatically. You
can use Self clean feature as often as you like.
NOTE! You can only activate this function in COOL or DRY mode.
INTELLIGENT EYE
Press the button to activate wind ow follow people feature, the fan speed is Auto, and the auto
swing feature is activated.
Press it again to stop and activate the wind ow away people feature. The fan speed is Auto, and the
auto swing feature is turned off. Press it the third time to stop the wind ow away people feature.
NOTE! The Intelligent eye function will stop if you press the other buttons except Timer and LED
buttons.
LOCK
Press Turbo button and Self clean button simultaneously for
one second to lock or unlock the keyboard.
Other functions
Press and hold Temp + and Temp – buttons together for 3 seconds
will alternate the temperature display between the °C and °F scale.
Hold together for one second to activate LOCK function.

User manual Innova IMRZ
20
ENGLISH
OTHER FEATURES
Auto-Restart
If the unit loses power, it will automatically restart with the prior settings once power has been
restored.
Low Ambient Heating
The advanced inverter technology to withstand the most extreme weather conditions. You can enjoy
comfortable and heating air even when the outdoor temperature is as low as -30°C(-22°F).
Low Ambient Cooling
With low ambient cooling function, the outdoor fan speed can be changed according to the condenser
temperature and AC can run smoothly under the temperature as low as -15°C(5°F).
Intelligent eye
The system is controlled intelligently under Intelligent eye mode. It can detect the people’s activities
in the room. The wind can ow away from people, but also can follow people. In Cooling mode ,when
you are away for 30 minutes, the unit automatically lowers the frequency to save energy(for inverter
models only). When you are away for 2 hours, it automatically shuts down. When you returns to the
room, it turns on automatically. In mode heating/cooling unit automatically lowers the frequency if
you are away from the room more than 30 minutes. When you come back, it goes back to its original
position. The unit always give priority to achieve the set temperature before the rate goes down.
Wireless Control (option)
Wireless control allows you to control your air conditioner using your mobile phone and a Wireless
connection. For the USB device access, replacement, maintenance operations must be carried out by
professional staff.
Louver Angle Memory
When turning on your unit, the louver will automatically resume its former angle.
Refrigerant Leakage Detection
The indoor unit will automatically display “EC” when it detects refrigerant leakage. Only available in
cooling mode.
Comfort Humidity
With smart sensor technology, not only detect the temperature but also detect humidity level of the
room.You can customize your most comfortable humidity level through smart APP. Only available in dry
mode.
NOTE ON ILLUSTRATIONS
Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit may be
slightly different. The actual shape shall prevail.