Midea Corona MSC-07CRN1 User manual

Cover
MSC-07CRN1; MSC-07HRN1
MSC-09CRN1; MSC-09HRN1
MSC-12CRN1; MSC-12HRN1
MSC-18CRN1; MSC-18HRN1

Content
2
Content
1. Precaution .................................................................................................................... 1
1.1 Safety Precaution ......................................................................................................................... 1
1.2 Warning ........................................................................................................................................ 1
2. Function ....................................................................................................................... 3
3. Dimension .................................................................................................................... 5
3.1 Indoor unit..................................................................................................................................... 5
3.2 Outdoor unit.................................................................................................................................. 5
4. Specification ................................................................................................................ 6
5. Refrigerant cycle diagram........................................................................................... 8
6. Operation limits ........................................................................................................... 9
6.1 Cooling operation ......................................................................................................................... 9
6.2 Heating operation ......................................................................................................................... 9
7. Schematic diagram and Wiring diagram ................................................................. 11
7.1. Schematic diagram......................................................................................................................11
7.2. Wiring diagram ........................................................................................................................... 12
8. Installation details...................................................................................................... 16
8.1 Wrench torque sheet for installation........................................................................................... 16
8.2 Connecting the cables................................................................................................................ 16
8.3 Pipe length and the elevation..................................................................................................... 16
8.4 Air purging of the piping and indoor unit .................................................................................... 18
8.5 Pumping down (Re-installation) ................................................................................................. 19
8.6 Re-air purging (Re-installation) .................................................................................................. 20
8.7 Balance refrigerant of the 2-way, 3-way valves ......................................................................... 21
8.8 Evacuation.................................................................................................................................. 22
8.9 Gas charging .............................................................................................................................. 23
9. Pressure table ............................................................................................................ 24
9.1 MSC-07CRN1............................................................................................................................. 24
9.2 MSC-07HRN1............................................................................................................................. 24
9.3 MSC-09CRN1............................................................................................................................. 24
9.4 MSC-09HRN1............................................................................................................................. 25
9.5 MSC-12CRN1............................................................................................................................. 25
9.6 MSC-12HRN1............................................................................................................................. 25
9.7 MSC-18CRN1............................................................................................................................. 26
9.8 MSC-18HRN1............................................................................................................................. 26
10. Capacity table ............................................................................................................ 27
10.1 MSC-07CRN1............................................................................................................................. 27
10.2 MSC-07HRN1............................................................................................................................. 27

Content
3
10.3 MSC-09CRN1............................................................................................................................. 28
10.4 MSC-09HRN1............................................................................................................................. 28
10.5 MSC-12CRN1............................................................................................................................. 29
10.6 MSC-12HRN1............................................................................................................................. 29
10.7 MSC-18CRN1............................................................................................................................. 30
10.8 MSC-18HRN1............................................................................................................................. 30
11. Electronic function .................................................................................................... 31
11.1 Proper symbols and their meaning ............................................................................................ 31
11.2 Function...................................................................................................................................... 31
11.3 Protection ................................................................................................................................... 31
11.4 Fan-only mode............................................................................................................................ 32
11.5 Cooling mode ............................................................................................................................. 32
11.6 Dehumidifying mode................................................................................................................... 33
11.7 Heating mode ............................................................................................................................. 34
11.8 Defrosting mode (available for heating mode)........................................................................... 35
11.9 Auto mode .................................................................................................................................. 36
11.10 Force cooling function ................................................................................................................ 36
11.11 Sleep mode ................................................................................................................................ 37
11.12 Auto restart function ................................................................................................................... 37
11.13 Turbo mode ................................................................................................................................ 37
11.14 PLASMA ( optional): ................................................................................................................... 37
11.15 Anion( optional) .......................................................................................................................... 37
12. Model and Parameters .............................................................................................. 39
13. Troubleshooting......................................................................................................... 40
13.1 Display board.............................................................................................................................. 40
13.2 Troubleshooting.......................................................................................................................... 40
13.3 Diagnostic chart.......................................................................................................................... 41
13.4 Resetting phenomenon often occurs during operation.............................................................. 42
13.5 Operation lamp flashes and Timer lamp off. .............................................................................. 42
13.6 Operation lamp flashes and Timer lamp on. .............................................................................. 42
13.7 Operation lamp off and Timer lamp flashes ............................................................................... 43
13.8 Operation lamp on and Timer lamp flashes ............................................................................... 43
13.9 Operation lamp flashes, Timer lamp flashes ............................................................................. 43
14. Characteristic of temperature sensor...................................................................... 44

Service manual
1
1. Precaution
1.1 Safety Precaution
To prevent injury to the user or other people and property damage, the following instructions must be followed.
Incorrect operation due to ignoring instruction will cause harm or damage.
Before service unit, be sure to read this service manual at first.
1.2 Warning
Installation
Do not use a defective or underrated circuit breaker.
Use this appliance on a dedicated circuit.
There is risk of fire or electric shock.
For electrical work, contact the dealer, seller, a
qualified electrician, or an Authorized service center.
Do not disassemble or repair the product, there is risk of
fire or electric shock.
Always ground the product.
There is risk of fire or electric shock.
Install the panel and the cover of control box
securely.
There is risk of fire of electric shock.
Always install a dedicated circuit and breaker.
Improper wiring or installation may cause fore or electric
shock.
Use the correctly rated breaker of fuse.
There is risk of fire or electric shock.
Do not modify or extend the power cable.
There is risk of fire or electric shock.
Do not install, remove, or reinstall the unit by
yourself (customer).
There is risk of fire, electric shock, explosion, or injury.
Be caution when unpacking and installing the
product.
Sharp edges could cause injury, be especially careful of
the case edges and the fins on the condenser and
evaporator.
For installation, always contact the dealer or an
Authorized service center.
There is risk of fire, electric shock, explosion, or injury.
Do not install the product on a defective installation
stand.
It may cause injury, accident, or damage to the product.
Be sure the installation area does not deteriorate
with age.
If the base collapses, the air conditioner could fall with it,
causing property damage, product failure, and personal
injury.
Do not let the air conditioner run for a long time
when the humidity is very high and a door or a
windows is left open.
Moisture may condense and wet or damage furniture.
Take care to ensure that power cable could not be
pulled out or damaged during operation.
There is risk of fire or electric shock.
Do not place anything on the power cable.
There is risk of fire or electric shock.
Do not plug or unplug the power supply plug during
operation.
There is risk of fire or electric shock.
Do not touch (operation) the product with wet hands.
There is risk of fire or electric shock.
Do not place a heater or other appliance near the
power cable.
There is risk of fire and electric shock.
Do not allow water to run into electric parts.
It may cause fire, failure of the product, or electric shock.
Do not store or use flammable gas or combustible
near the product.
There is risk of fire or failure of product.
Do not use the product in a tightly closed space for a
long time.
Oxygen deficiency could occur.
When flammable gas leaks, turn off the gas and
open a window for ventilation before turn the
product on.
Do not use the telephone or turn switches on or off.
There is risk of explosion or fire.
If strange sounds, or small or smoke comes from
product. Turn the breaker off or disconnect the
power supply cable.
There is risk of electric shock or fire.
Stop operation and close the window in storm or
hurricane. If possible, remove the product from the
window before the hurricane arrives.
There is risk of property damage, failure of product, or
electric shock.
Do not open the inlet grill of the product during
operation. (Do not touch the electrostatic filter, if the

Service manual
2
unit is so equipped.)
There is risk of physical injury, electric shock, or product
failure.
When the product is soaked (flooded or submerged),
contact an Authorized service center.
There is risk of fire or electric shock.
Be caution that water could not enter the product.
There is risk of fire, electric shock, or product damage.
Ventilate the product from time to time when
operating it together with a stove, etc.
There is risk of fire or electric shock.
Turn the main power off when cleaning or
maintaining the product.
There is risk of electric shock.
When the product is not be used for a long time,
disconnect the power supply plug or turn off the
breaker.
There is risk of product damage or failure, or unintended
operation.
Take care to ensure that nobody could step on or fall
onto the outdoor unit.
This could result in personal injury and product damage.
CAUTION
Always check for gas (refrigerant) leakage after
installation or repair of product.
Low refrigerant levels may cause failure of product.
Install the drain hose to ensure that water is drained
away properly.
A bad connection may cause water leakage.
Keep level even when installing the product.
To avoid vibration of water leakage.
Do not install the product where the noise or hot air
from the outdoor unit could damage the
neighborhoods.
It may cause a problem for your neighbors.
Use two or more people to lift and transport the
product.
Avoid personal injury.
Do not install the product where it will be exposed to
sea wind (salt spray) directly.
It may cause corrosion on the product. Corrosion,
particularly on the condenser and evaporator fins, could
cause product malfunction or inefficient operation.
Operational
Do not expose the skin directly to cool air for long
periods of time. (Do not sit in the draft).
This could harm to your health.
Do not use the product for special purposes, such
as preserving foods, works of art, etc. It is a
consumer air conditioner, not a precision refrigerant
system.
There is risk of damage or loss of property.
Do not block the inlet or outlet of air flow.
It may cause product failure.
Use a soft cloth to clean. Do not use harsh
detergents, solvents, etc.
There is risk of fire, electric shock, or damage to the
plastic parts of the product.
Do not touch the metal parts of the product when
removing the air filter. They are very sharp.
There is risk of personal injury.
Do not step on pr put anything on the product.
(outdoor units)
There is risk of personal injury and failure of product.
Always insert the filter securely. Clean the filter
every two weeks or more often if necessary.
A dirty filter reduces the efficiency of the air conditioner
and could cause product malfunction or damage.
Do not insert hands or other object through air inlet
or outlet while the product is operated.
There are sharp and moving parts that could cause
personal injury.
Do not drink the water drained from the product.
It is not sanitary could cause serious health issues.
Use a firm stool or ladder when cleaning or
maintaining the product.
Be careful and avoid personal injury.
Replace the all batteries in the remote control with
new ones of the same type. Do not mix old and mew
batteries or different types of batteries.
There is risk of fire or explosion.
Do not recharge or disassemble the batteries. Do not
dispose of batteries in a fire.
They may burn of explode.
If the liquid from the batteries gets onto your skin or
clothes, wash it well with clean water. Do not use the
remote of the batteries have leaked.
The chemical in batteries could cause burns or other
health hazards.

Service manual
3
2. Function
The function will be
operate in any operation
mode.
Indoor unit
Operation ON/OFF by remote controller
Room temperature sensor.
Pipe temperature sensor.
Sensing by room temperature
Maintain the room temperature in accordance with the setting temperature.
Room temperature control
Indoor fan is delayed for 5 sec at the starting.
Starting temperature control
Restarting is for approx. 3 minutes..
Time Delay Safety control
High, med, low, breeze.
Indoor fan speed control
Light up in the LED (LCD) for each operation mode.
The unit will decide the louver direction according to operation mode.
Two-direction air vane
The fan is turn to low speed (cooling/heating).
The unit will be turn off at the seventh hour.
Sleep mode auto control
The function is usually used in rainy days in
springtime or damp areas.
Independent dehumidification
Operation indication Lamps (LED)
The louver can be set at the desired position or swing up and
down automatically
Air flow Direction control
The unit can be change by the room temperature.
Auto mode
Easy clean panel
Flexible wiring connection
Defrost mode
Temp. Compensation
The function will be operated
in any operation mode.
Plasma (Optional)
Prevent the cold wind at
the beginning of unit start.
Anti-cold function
Auto-restart function
Self-diag. function
UV Generator (Optional)
Oxygen Generator (Optional)
Tele Remote control (Optional)
Anion (Optional)

Service manual
4
The unit can operate in cooling mode at low ambient temperature conditions.
The unit has 3 mins delay between continuously ON/OFF operations.
Outdoor unit
Power relay control
Low ambient kit
Bird tail propeller fan makes the outdoor unit run more quietly.
Low noise air flow system
The hydrophilic fin can improve the heating efficiency at operation mode.
Hydrophilic aluminum fin
It is only operated in the heating operation mode except defrosting operation.
Discharge pipe temperature protect
Anti-rust cabinet
Valve protection cover
4 way valve control
Made from electrolytic zinc steel sheet and anti
-
rust coated components.
It protects the valves and prevents water from dripping.

Service manual
5
3. Dimension
3.1 Indoor unit
Dimension
Mode W H L
7K 750 250 188
9K 750 250 188
12K 815 280 195
18K 920 292 225
3.2 Outdoor unit
Dimension
Mode W H L L1 L2 L3
7K 500 535 235 458 280 540
9K 780 540 250 548 266 560
12K 780 540 250 548 266 560
18K 845 695 335 560 360 715

Service manual
6
4. Specification
MSC-07CRN1 MSC-07HRN1 MSC-09CRN1 MSC-09HRN1
Ph-V-Hz
1, 220-240V~, 50Hz 1, 220-240V~, 50Hz 1, 220-240V~, 50Hz 1, 220-240V~, 50Hz
Capacity Btu/h 7000 7000 9000 9000
Input W 640 640 820 820
Rated current A 2.9 2.9 3.8 3.8
EER Btu/w.h 10.9 10.9 10.9 10.9
Capacity Btu/h ----- 8500 ----- 11000
Input W ----- 690 ----- 890
Rated current A ----- 3.1 ----- 4
COP W/W ----- 3.6 ----- 3.6
A 5 3.8 4.5 4.5
A 15 17 17 20
Model
PA82X1C-4DZDE PA82X1C-4DZDE PA108X1C-4FTDE PA108X1C-4FTDE
Type Rotary Rotary Rotary Rotary
Brand TOSHIBA TOSHIBA TOSHIBA TOSHIBA
Capacity Btu/h 7000 7000 9000 9000
Input W 730 730 920 920
Rated current(RLA) A 3.3 3.3 4.1 4.1
Locked rotor Amp(LRA) A 16 16 18.7 18.7
Thermal protector MRA13408-9087 MRA13408-9087 MRA13430-9087 MRA13430-9087
Capacitor uF 25 25 25 25
Refrigerant oil ml 300 300 330 330
Model RPG13H RPG13H RPG13H RPG13H
Brand Welling Welling Welling Welling
Input W 36.5 36.5 39.5 39.5
Capacitor uF 1.2 1.2 1.2 1.2
Speed(hi/mi/lo) r/min 1050/920/820 1050/920/820 1200/950/850 1200/950/850
m3/h 430/360/310 450/400/350 450/400/350 500/430/370
dB(A) 35/32/29 35/32/30 35/32/30 37/34/31
Model YDK24-6T YDK24-6T YDK24-6F YDK24-6F
Brand Welling Welling Welling Welling
Input W 56 56 56 56
Capacitor uF 2.5 2.5 2.5 2.5
Speed r/min 800 800 800 800
m3/h 1500 1500 1800 1800
dB(A) 49 49 49 50
g800 820 900 920
Liquid side/ Gas side mm Ф6.35/Ф9.53 Ф6.35/Ф9.53 Ф6.35/Ф9.53 Ф6.35/Ф9.53
Max. pipe length m 20 20 20 20
Max. in level m 8 8 8 8
℃
17-30 17-30 17-30 17-30
℃
18~-45 -7-45 18-45 -7-45
m2 10~14 10~14 14-21 14-21
Ambient temp
Application area
Outdoor noise level
Refrigerant type (R410A)
Refrigerant
piping
Operation temp
Indoor air flow (Hi/Mi/Lo)
Indoor noise level (Hi/Mi/Lo)
Outdoor fan
motor
Outdoor air flow
Max. current
Starting current
Compressor
Indoor fan
motor
Model
Power supply
Cooling
Heating
Note:
The noise date is base on hemi-anechoic chamber, during actual operation; these values are normally somewhat
different as a result of ambient condition.
The above design and specifications are subject to change without prior notice for product improvement.

Service manual
7
MSC-12CRN1
MSC-12HRN1
MSC-18CRN1
MSC-18HRN1
Ph-V-Hz
1, 220-240V~, 50Hz 1, 220-240V~, 50Hz 1, 220-240V~, 50Hz 1, 220-240V~, 50Hz
Capacity Btu/h 12000 12000 18000 18000
Input W 1090 1090 1720 1720
Rated current A 5 5 7.8 7.8
EER Btu/w.h 11 11 11 11
Capacity Btu/h ----- 13000 ----- 19000
Input W ----- 1050 ----- 1630
Rated current A ----- 4.8 ----- 7.4
COP W/W ----- 3.6 ----- 3.4
A 8 7 7 11.5
A 33 30 30 42.5
Model PA140X2C-4FT PA140X2C-4FT
PA200X2CS-4KU1 PA200X2CS-4KU1
Type rotary rotary Rotary Rotary
Brand TOSHIBA TOSHIBA Toshiba Toshiba
Capacity Btu/h 12000 12000 16910 16910
Input W 1200 1200 1720 1720
Rated current(RLA) A 5.4 5.4 7.5 7.5
Locked rotor Amp(LRA) A 29.9 29.9 34.5 34.5
Thermal protector UP3RE0591-T56 UP3RE0591-T56 Internal Internal
Capacitor uF 35 35 45 45
Refrigerant oil ml 480 480 VG74 ·750 VG74 ·750
Model RPG13D RPG13D RPG28D RPG28D
Brand Welling Welling Welling Welling
Input W 44 44 53 53
Capacitor uF 1.2 1.2 1.5uF/450V 1.5uF/450V
Speed(hi/mi/lo) r/min 1220/1000/800 1220/1000/800 1180/1080/800 1180/1080/800
m3/h 580/500/420 580/500/420 850/700/600 850/700/600
dB(A) 37/34/31 40/37/34 42/39/37 42/39/37
Model YDK24-6F YDK24-6F YDK53-6K YDK53-6K
Brand Welling Welling Welling Welling
Input W 56 56 125 125
Capacitor uF 2.5 2.5 3.5 3.5
Speed r/min 800 800 800 800
m3/h 2000 2000 2500 2500
dB(A) 51 50 52 52
g1050 1080 1700 1740
Liquid side/ Gas side mm Ф6.35/Ф12.7 Ф6.35/Ф12.7 Ф6.35/Ф12.7 Ф6.35/Ф12.7
Max. pipe length m 20 20 25 25
Max. in level m 8 8 10 10
℃
17-30 17-30 17-30 17-30
℃
18-45 7-45 18-45 -7-45
m2 18-26 18-26 28-40 28~40
Model
Power supply
Cooling
Heating
Max. current
Starting current
Compressor
Indoor fan
motor
Indoor air flow (Hi/Mi/Lo)
Indoor noise level (Hi/Mi/Lo)
Outdoor fan
motor
Outdoor air flow
Ambient temp
Application area
Outdoor noise level
Refrigerant type (R410A)
Refrigerant
piping
Operation temp
Note:
The noise date is base on hemi-anechoic chamber, during actual operation; these values are normally somewhat
different as a result of ambient condition.
The above design and specifications are subject to change without prior notice for product improvement.

Service manual
8
5. Refrigerant cycle diagram
Cooling only
Heat pump mode

Service manual
9
6. Operation limits
6.1 Cooling operation
Outdoor unit air temp. ℃ DB
Indoor air temp. ℃ DB
Note: The chart is the result from the continuous operation under constant air temperature conditions.
However, excludes the initial pull-down stage.
6.2 Heating operation
Indoor air temp. ℃ DB
Outdoor unit air temp. ℃ DB
Note: The chart is the result from the continuous operation under constant air temperature conditions.
However, excludes the initial pull-down stage.

Service manual
10

Service manual
11
7. Schematic diagram and Wiring diagram
7.1. Schematic diagram

Service manual
12
7.2. Wiring diagram
7.2.1 MSC-07CRN1, MSC-09CRN1, MSC-12CRN1

Service manual
13
7.2.2 MSC-07HRN1, MSC-09HRN1, MSC-12HRN1

Service manual
14
7.2.3 MSC-18CRN1
I NDOOR UNI T
COMPRESSOR
CAPACI TOR
COMPRESSOR
Y/ G WHI TE
S
BLUE
R
C
OVERLOAD
RELAY
RED
OUTDOOR UNI T
CAPACI TOR
FAN
FAN
MOTOR
BLUE
RED
BLACK
Y&G
BLACK
BLACK

Service manual
15
7.2.4 MSC-18HRN1
I NDOOR UNI T
OUTDOOR UNI T
RED
BLACK
BLUE
BLACK
Y&G
COMPRESSOR
C
S
R
WHI TE
BLUE
COMPRESSOR
CAPACI TOR
FAN
MOTOR RED
BLUE
FAN CAPACI TOR
BLACK
BLUE
4- WAY
Y/ G
OVERLOAD
RELAY

Service manual
16
8. Installation details
8.1 Wrench torque sheet for installation
Outside diameter Torque
mm inch Kg.m
φ 6.35 1/4 1.8
φ 9.52 3/8 4.2
φ 12.7 1/2 5.5
8.2 Connecting the cables
The power cord of connect should be selected according to the following specifications sheet.
Grade
Unit 7K 9K 12K
18K
mm
2
1.0 1.0 1.5 2.5
8.3 Pipe length and the elevation
Pipe size
Capacity
Btu/h GAS LIQUID
Standard
length(m)
Max.
ElevationB (m)
Max. Pipe
lengthA (m)
Additional
refrigerant(g/m)
07k~09K
3/8’’ ( φ
9.52)
1/4’’ ( φ
6.35)
5 5 10 30
12K 1/2’’ (
φ
12.7)
1/4’’ ( φ
6.35)
5 5 10 30
18K 1/2’’ (
φ
12.7)
1/4’’ ( φ
6.35)
5 8 15 30