Midtronics CPX-900 Series Technical manual

CPX-900 SERIES
SOFTWARE UPDATE PROCEDURE
This instrucon manual describes the process to successfully update your
baery tester.
Read the instrucon carefully and follow the steps listed.
Note: ThelocaonoftheIconsshownonthescreenpicturesinthis
proceduremaybedierentfromthereallocaoninyourbaery
testerduetodierentversions.
P/N :
!
Deviceshouldbeconnectedtoabaeryusingclampsduringtheprocess.
Whenthereisnobaeryconnectedduringthesecondhalfofthupdate,thedevicemayhavetoberebootedataservicelocaon.
Visual Step-to-stepprocedure
To start the over-the-air update process you’ll have to be connectedtoastableWi-Finet-
work.
Howtocheck?
You can see if you are connected to wi by checking if a wi icon is visible in the main
menu.
Go to Messages in the Main Menu and selectthemessage that says an update is available.
The update will automacally start loading.
Warning
Make sure the device is connected to a baery, so the device won’t run out of charge
during the update process.
The device is connecng to the network that was last used.
Issue?
Ifthereisanissuewithconnecngtoanetwork,seethefollowingsteps.
Noissue?
If the device can make a connecon to a Wi-Fi network without problem, the update will
be performed automacally. This will take between 15-30minutes, depending on the Wi-Fi
connecon.

Visual Step-to-stepprocedure
If the device cannot directly connect to a Wi-Fi network, it will start scanning for available
networks.
Select the network you wish to connect to.
If the network is password protected, you’ll be requested to enter the Password, and click
‘Save’ at the right boom corner of the screen.
The device is connecng to the network that you have just selected.
Issue?
In the case you are sll unable to connect to a network, you may retry once more. If sll
failing, please contact your nearest servicepartner for assistance.
Noissue?
If the device can make a connecon to a Wi-Fi network without problem, the update will
be performed automacally. This will take between 15-30minutes, depending on the Wi-Fi
connecon.
The device is updang.
Please do not move the device, or disconnect from the baery, during the update process.
Aer the update is installed, the device will reboot.
The device is ready to be used again.
Issue?
If you are having issues during or aer the update process, please contact your nearest
service partner for assistance.
CPX-900 SERIES
SOFTWARE UPDATE PROCEDURE
P/N :