Miller Edge SensingEdge MT22 User manual

P.O. Box 159 • West Grove, PA 19390 • [phone] • Fax: [phone] • 800-220-3343
6809 South Harl Avenue, Suite A, Tempe, AZ 85283 • [phone] • Fax [phone] • 800-887-3343
www.milleredge.com
Model # MT22
SensingEdge
Color: Black, Yellow, Gray, White, Y/B Stripe
Length: per specification to nearest 1/4
Lead Wire: SJTO, 18 gauge, 2ft. length
or 22 gauge universal
Sensitivity: nominal 4-7 lbf
Electrical
Diagram: 2 wire N.O. configuration
Electrical
Maximum: 24 volt AC or DC,1/2 amp
Mechanical Diagram: See drawings on reverse side
Contact Element: Alumaglas®
Materials: Heavy Duty Reinforced PVC
Temperature Range: -30oF to +155oF
Wire Outlet
Location: Right side, Left side or End
TECHNICAL SPECIFICATIONS:
OPTIONS:
FUNCTIONAL BENEFITS:
• 4 wire N.O. configuration
• Pneumatic (MTP22) Air-Wave (MTAW22)
• 4-wire control panel (MFSC-100)
• Yellow/Black striped outer cover material
• 4-wire intrinsically-safe control panel (FSIS-25-4)
• XR-5 chemically resistant cover for protection against:
kerosene 50% phosphoric acid
diesel fuel 50% hydrochloric acid
JP-4 jet fuel 50% acetic acid
salt water SAE-30 oil
The MT22 pressure sensitive electric edge is custom
manufactured to your exact specifications for length,
width, height and sensitivity. When touched lightly or at
an angle, the MT22 will send an immediate electrical sig-
nal to your controls to stop, and/or reverse operations.
It is completely flexible and will contour curved surfaces.
In addition to being a sensing device, the MT22 also acts
as a weatherstrip on doors to help save energy. Contact
us with your specifications and we will design the best
SensingEdge for your application.
About the MT22...
Applications
• Rolling
Steel
Doors
• Material
Handling
Systems
• Touch Sensitive signalling
• Small profile
• Easy to Install
• Stock sizes available for same day
shipment
• Mounts horizontally
• ANSI/UL325 Recognized Component
For more information, please visit www.devancocanada.com
or call toll free at 855-931-3334

SensingEdge
Installation
To install remove edge from shipping container and lay
out flat and straight. Close air valve. Position edge in de-
sired location and attach with screws through mount-
ing flange at ends and center. Continue to attach edge
by securing mounting flange with screws placed 24”
apart. Do not place screws below seal line. For detailed
installation & wiring instructions, contact MillerEdge, Inc.
Care of the MT22. . .
Minimal care is required for MT style SensingEdges
since they are manufactured with only the most
durable materials and the highest quality control stan-
dards. However, SensingEdges should be examined
regularly for cuts or punctures which could damage
internal components. Also check wiring to be sure
connections are secure. When properly maintained,
the MT22 offers years of trouble-free operation.
Warranty
We will replace within one year of shipment from our
factory, any SensingEdge subject to normal use
which is found to have defective materials or work-
manship, as determined solely by our factory repre-
sentative. Replacements will be shipped to you
freight collect. This warranty is void where evidence
of misuse or abuse is present.
Model # MT22
P.O. Box 159 • West Grove, PA 19390 • [phone] • Fax: [phone] • 800-220-3343
6809 South Harl Avenue, Suite A, Tempe, AZ 85283 • [phone] • Fax [phone] • 800-887-3343
www.milleredge.com
Mechanical Diagrams:
2”
11/2”
2”
MT22_Spec_20140819
U.S. Patent #5,962,825 CAN. Patent #2,008,021
For more information, please visit www.devancocanada.com
or call toll free at 855-931-3334