Milwaukee M18 FSZ User manual

M18 FSZ
EN User Manual
ZH
ZH
KO
TH คู่มือการใช ้งาน
ID Buku Petunjuk Pengguna
VI Cẩm nang hướng dẫn sửdụng
JA ユーザーマニュアル

6
8
7
1514
2

11
12
4
5
10
3

1
1
2
2
click
4
Remove the battery pack
before starting any work on the
product.
對產品進行任何工作前，先移
除電池。
对产品进行任何工作前，先移
除电池。
㥐䖼G㇠㟝G㤸SGⵤ䉤⫠G䑝㡸G
㥐ᶤ䚌㐡㐐㝘U
ถอดชุดแบตเตอรีออกก่อนเริมกระทํา
การใด ๆกับผลิตภัณฑ์
Lepaskan paket baterai
sebelum memulai pekerjaan
apa pun pada produk.
Tháo pin trước khi bắt đầu thao
tác với sản phẩm.
製品のメンテナンス、アクセ
サリーを交換する前に、バッ
テリーパックを取り外してく
ださい。

78-100 %
55-77 %
33-54 %
10-32 %
< 10 %
5

6

1
2
3
7

1
2
2
1
8

!
!
9

10

START
STOP
11
Insulated gripping surface
絕緣的把手
绝缘的把手
㤼㜤GἬ⫱G䖐⮨
พืนผิวจับกันความร ้อน
Permukaan genggam
berinsulasi
Bềmặt tay cầm được cách
điện
絶縁グリップ面

1
2
3
click
click
click
12

13

1
2
3
14

1
2
3
15

16
English
16
TECHNICAL DATA M18 FSZ
Max cutting depth
Soft wood 300 mm
Steel 20 mm
Aluminium 25 mm
Non-ferrous metal 25 mm
Metal pipe 150 mm
Stroke rate 0 – 3000 min-1
Lengths of stroke 32 mm
Battery voltage 18 V
Weight according EPTA-Procedure 01/2014 (2.0 Ah - 12.0 Ah) 3.5 – 4.6 kg
Recommended ambient operating temperature -18 – +50 °C
Recommended battery types M18B, M18 HB...
Recommended charger M12-18..., M18 DFC
Noise/Vibration information
Measured values determined according to EN 62841
Typical A-weighted noise levels of the tool
Sound pressure level (Uncertainty K=3dB(A)) 85.4 dB (A)
Sound power level (Uncertainty K=3dB(A)) 96.4 dB (A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 62841.
Vibration emission value ah
Cutting particleboard *1 26.7 m/s2
Uncertainty K= 1.5 m/s2
Cutting wooden beams *2 25.1 m/s2
Uncertainty K= 1.5 m/s2
*1 with saw blade bimetal, dimension 150 x 1.25 mm and tooth pitch 5 mm
*2 with saw blade bimetal, dimension 230 x 1.6 mm and tooth pitch 5 mm The AxTM
WARNING!
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured
in accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for
different applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ. These
conditions may significantly increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned offor when
it is running idle. These conditions may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and
the accessories, keeping the hands warm (in case of vibration), and organising work patterns.

17 English 17
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury. Save all warnings
and instructions for future reference.
SABRE SAW SAFETY WARNINGS
Hold the power tool by the insulated gripping surfaces
when performing an operation where the cutting accessory
may contact hidden wiring. Cutting accessory contacting a
“live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
Use clamps or another practical way to secure and support
the workpiece to a stable platform. Holding the workpiece by
the hand or against the body leaves it unstable and may lead
to loss of control.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the product. Wear protective clothing, such as
dust mask, protective gloves, sturdy non-slip footwear, helmet,
and ear defenders.
The dust produced when using the product may be harmful to
health. Do not inhale the dust. Wear a suitable dust-protection
mask.
Do not machine any materials that present a danger to health
(e.g., asbestos).
Turn offthe product immediately if the insertion tool stalls.
Do not turn on the product on again while the insertion tool is
stalled, as doing so could trigger a sudden recoil with a high
reactive force. Determine why the insertion tool stalled and
rectify this, paying heed to the safety instructions.
The possible causes may be:
●The insertion tool is tilted in the workpiece to be machined.
●The insertion tool has pierced through the material to be
machined.
●The power tool is overloaded.
Do not reach into the product while it is running. The insertion
tool may become hot during use.
WARNING! Danger of burns
●when changing tools
●when setting the product down
Do not remove chips and splinters while the product is running.
When working in walls, ceilings, or floors, take care to avoid
electric cables and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage.
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft
materials (wood, light building materials for walls). Harder
materials (metals) must first be drilled with a hole corresponding
to the size of the saw blade.
Remove the battery pack before starting any work on the
product.
Do not dispose of used battery packs in the household refuse
or by burning them. MILWAUKEE distributors offer to retrieve
old batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
No metal parts must be allowed to enter the battery section of
the charger (short circuit risk).
Use only System M18 chargers for charging System M18
battery packs. Do not use battery packs from other systems.
Never break open battery packs and chargers, and store them
only in dry rooms. Keep battery packs and chargers dry at all
times.
Battery acid may leak from damaged batteries under extreme
load or extreme temperatures. In case of contact with battery
acid, wash it offimmediately with soap and water. In case
of eye contact, rinse thoroughly for at least 10 minutes and
immediately seek medical attention.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal injury, and
product damage due to a short circuit, never immerse the tool,
battery pack or charger in fluid or allow fluid to flow inside
them. Corrosive or conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach containing products,
etc., can cause a short circuit.
WARNING! This device contains a lithium button or coin
cell battery. A new or used battery can cause severe internal
burns and lead to death in as fast as 2 hours if it is swallowed
or if it enters the body. Always secure the battery cover. If it
does not close securely, stop using the product, remove the
batteries, and keep it away from children. If you think batteries
may have been swallowed or have entered the body, seek
immediate medical attention.
SPECIFIED CONDITIONS OF USE
The sabre saw cuts wood, plastic, and metal. The product can
cut straight lines, curves, and internal cut-outs. It cuts pipes
and can cut flush to a surface.
Do not use the product for any other purpose.
ELECTRIC BRAKE
The electric brake engages when the trigger is released,
causing the blade to stop and allowing you to proceed with
your work. Generally, the saw blade stops within two seconds.
However, there may be a delay between the time you release
the trigger and when the brake engages. Occasionally, the
brake may miss completely. If the brake misses frequently, the
saw needs servicing by an authorised MILWAUKEE service
centre.
Always wait for the blade to stop completely before removing
the saw from the workpiece.
BATTERIES
Battery packs that have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, after use, the battery packs have to
be fully charged.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
●Store the battery pack where the temperature is below
27°C and away from moisture.

18
English
18
●Store the battery packs in a 30% - 50% charged condition.
●Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION
In extremely high torque, binding, stalling, and short circuit
situations that cause high current draw, the product stops for
about 2 seconds and then turns off. Release the trigger to reset
the product.
Under extreme circumstances, the internal temperature of the
battery could become too high. If this happens, the battery
shuts down.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in accordance
with local, national, and international provisions and
regulations.
●Batteries can be transported by road without further
requirements.
●Commercial transport of lithium-ion batteries by third parties
is subject to Dangerous Goods regulations. Transport
preparation and transport are exclusively to be carried out
by appropriately trained persons, and the process has to be
accompanied by corresponding experts.
When transporting batteries:
●Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
●Ensure that the battery pack is secured against movement
within packaging.
●Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
MAINTENANCE
The ventilation slots of the product must be kept clear at all
times.
Use only MILWAUKEE accessories and spare parts. Should
components that have not been described need to be replaced,
please contact one of our MILWAUKEE service agents (see
our list of guarantee or service addresses).
If needed, an exploded view of the product can be ordered.
State the product type and the serial number on the label, and
order the drawing at your local service centres.
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting
any work on the product.
Read the instructions carefully before
starting the product.
Always wear goggles when using the
product.
Accessory: Not included in standard
equipment, available as an accessory.
Do not dispose of electric tools, batteries,
or rechargeable batteries together with
household waste material.
Electric tools and batteries that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility
Check with your local authority or retailer for
recycling advice and collection point..
n0Stroke rate under no-load
VVolts
Direct current

19 19
㑷儊ѣᮽ
ᢶ㺉ᮮᬐ 0)6=
ᴶཝⲺ࠽ࢨ␧ᓜ
䔕ᵞ PP
䤲 PP
䣷 PP
䶔䩫䠇ኢ PP
䠇ኢ㇗ PP
㺓ᬀ乱⦽ āPLQ
㺂ぁ PP
䴱⊖䴱༉ 9
ṯᬐ(37$3URFHGXUHⲺ䠃䠅$K$K āNJ
ᔰ䆦⫦ູᬃ֒ⓡᓜ āe&
᧞㯜Ⲻ䴱⊖五ශ 0%0+%
᧞㯜ݻ䴱ಞ 00')&
ಠ丩ᥥ䋽䁀
ד(1ᡶ③Ⲻ③䠅ٲȾ
⭘૷ж㡢$ࣖ⅀ಠ丩≪ᒩ
㚨༉ٲу⻰ᇐᙝⲺ③䠅. G%$ G%$
㚨ࣕ⦽㍐у⻰ᇐᙝⲺ③䠅. G%$ G%$
֟ᡪ䆭㙩ಞȾ
ד(1ᡶ③Ⲻᥥ㑳ٲп䔮䠅㑳ૂȾ
ᥥ䠁᭴ٲDK
࠽ࢨງᶵ PV
у⻰ᇐᙝⲺ③䠅. PV
࠽ࢨᵞ⁇ PV
у⻰ᇐᙝⲺ③䠅. PV
䐕䴏䠇ኢ䤮⡽θተሮhPPθ喈䐓PP
䐕䴏䠇ኢ䤮⡽θተሮhPPθ喈䐓PPδ$[70ε
䆜઀έ
ᵢ䃠᱄ᴮᡶᨆבⲺ䴽ㅿ㍐ᱥד⁏Ⓦ③䂜ᡶ③ᗍθъ㜳⭞᯲㠽жفᐛޭ䙨㺂∊䔹Ⱦ䂨ㅿ㍐⭞ּࡓ↛䂋զ仞䳠Ⱦ
ᇙ઀Ⲻ䴽䠁᭴ㅿ㍐ԙ㺞ⲺᱥᵢᐛޭⲺѱ㾷៿⭞Ⱦ❬㙂θྸ󰵳⭞᯲уⲺ៿⭞Ƚֵ⭞уⲺ䞃Ԭᡌؓ佀у⮬θ䴽䠁᭴ҕ㜳у
Ⱦ䙏㜳ᴹ൞㑳ᐛ֒ᱸ䯉р亥㪍໔ࣖ仞䳠ㅿ㍐Ⱦ
䂋զ䴽ᳪ䵨Ⲻㅿ㍐䚺៿㘹ឤᵢᐛޭ䰒ₕᱸⲺᱸ䯉θᡌ⮬ᐛޭ䚁䕿ռ঱ᵠሜ䳑ֵ⭞Ⲻᱸ䯉Ⱦ䙏㜳ᴹ᱄亥䲃ք㑳ᐛ֒ᵕ䯉Ⲻ仞䳠
ㅿ㍐Ⱦ
䄁⻰䃃亃ཌⲺᆿޞ᧠᯳θԛؓ䆭ᬃ֒ଗу䴽Ⲻᖧ丵θׁྸؓ佀ᵢᐛޭ㠽䞃ԬȽؓᤷᢁ䜞ⓡ᳌ૂӋ❬ᴿᓅⲺᐛ֒ᯯᕅȾ

20 㑷儊ѣᮽ
 䆜઀έ䯧䆶ᵢ⭘૷䳞䱺Ⲻᡶᴿᆿޞ䆜઀Ƚ䃠᱄Ƚᨈൌૂ㿅
ṲȾ㤛у᤿➝䆜઀ૂ䃠᱄ᬃ֒θࡽ㜳ᴹቄ㠪䀮䴱Ƚ⚡⚳ૂ
ᡌ೪䠃ۭᇩȾ
ሽᡶᴿ䆜઀ૂ䃠᱄ؓᆎླθᯯ׵ԛᗂḛ䯧Ⱦ
䔃࠶䤮ᆿޞ䆜઀
㤛֒ᾣᱸ࠽ࢨ䞃Ԭᴿ㜳᧛䀮䳧㰅Ⲻ᧛㐐θ䄁ᨗօ䴱ᐛޭⲺ
㎋㐙ᣀᢁȾ࠽ࢨ䞃Ԭ᧛䀮⚡㐐㜳ᴹቄ㠪䴱ᐛޭ㼮䵨Ⲻ䠇ኢ
䜞࠼ᑬ䴱θ㜳ᴹቄ㠪ᬃ֒Ӱଗ䀮䴱Ⱦ
ֵ⭞ུޭᡌެԌ㺂ⲺᯯᕅθሽᐛԬരᇐ᭥󰩧ࡦゟᇐⲺᒩ
рȾԛᢁᡌ㘻䓡儊ᨗօᐛԬᴹֵެуゟᇐθќ㜳ቄ㠪ཧ᧝Ⱦ
ެԌᆿޞૂᐛ֒䃠᱄
ֵ⭞䱨䆭㼓ۏȾֵ⭞ₕಞᱸθᗻ֟ᡪ䆭ⴤ䨗Ⱦᔰ䆦サᡪ䱨䆭
㼓ۏθׁྸ䱨ຫ㖟Ƚ䱨䆭ᢁྍȽ฻ര䱨┇Ⲻ䷁ޭȽᆿޞᑳૂ䆭
㙩ಞȾ
ֵ⭞↚ᐛޭᱸ⭘⭕Ⲻ㊿ຫ㜳ᴹᖧ丵ڛᓭȾ࠽ޛ㊿ຫȾᡪ
р䚟⮬Ⲻ䱨ຫ㖟Ⱦ
࠽ࣖᐛ㜳ᴹᖧ丵ڛᓭⲺᶆᯏȾ
ྸ󰵳ᨈޛᐛޭڒ↘䕿θࡽ㄁঩䰒䮿䁣ۏȾᨈޛᐛޭڒ↘䕿
ᱸθ࠽䠃᯦க䁣ۏθࡽ㜳ᴹቄ㠪シ❬ᗂ䘶θ⭘⭕䔹ཝ
Ⲻ֒⭞࣑Ⱦ⻰ᇐᨈޛᐛޭڒ↘䕿Ⲻ৕ഖќᱸ䀙⊰θᱸ
⌞ᝅᆿޞ䃠᱄Ⱦ
ڒ↘䕿㜳Ⲻ৕ഖᤢφ
●ᆹ൞ᖻࣖᐛᐛԬޝ۴ᯒχ
●ᆹサ䙅Ҽᖻࣖᐛᶆᯏχ
●䴱ᐛޭ䚄䔿Ⱦ
⭘૷䚁㺂ᱸθ࠽ծޛᆹⲺޝ䜞Ⱦֵ⭞䚄ぁѣθ᯳ᐛѣⲺᐛޭ
ᴹⲲ⟧Ⱦ
䆜઀έ⚲ۭⲺধ䳠
●ᴪᨑᐛޭ
●᭴с⭘૷ᱸȾ
⮬ₕಞԃ൞䚁䕿ᱸθ࠽␻䲚ₕಞрⲺᵞኇᡌ䠇ኢ⻄⡽Ⱦ
൞⡼໷Ƚཟ㣧ᶵᡌ൦ᶵр֒ᾣᱸθ⌞ᝅ䚵䯁䴱㐐Ƚ⟹≙ᡌ㠠ּ
≪㇗䚉Ⱦ
ֵ⭞ུ㐀㼓㖤രᇐླᐛԬȾᵠུ㐀ⲺᐛԬ㜳ᴹቄ㠪೪䠃ۭᇩ
ૂᩃۭȾ
࠽ֵ⭞ᴿ㻸Ⰻᡌ㘻ᐨᢣᴨⲺ࠶⡽Ⱦ
䔕䌠ᶆᯏδᵞȽ⭞᯲⡼Ⲻ䕋ශᔰㇿᶆᯏε൞⋈ᴿ乆ݾ䪳ᆊсθ
ԛ⴪᧛༉࠽Ⱦ䔹⺢Ⲻᶆᯏδ䠇ኢεᗻ举ݾ᤿࠶⡽ཝቅ䪳ᆊȾ
ቃ⭘૷䙨㺂Ա֋ᐛ֒ࢃθݾ〱䲚䴱⊖Ⱦ
ሽ⭞䚄Ⲻ䴱⊖㍺㠽ᇬᓣᔘỺ⢟␭ᡌ⟹⠈䴱⊖Ⱦ0,/:$8.((
㏉䣭୼ᨆב㡀䴱⊖ഔ᭬θԛؓ䆭ᡇهⲺ⫦ູȾ
ሽ䴱⊖㍺㠽ެԌ䠇ኢ⢟૷ж䎭ᆎ᭴δ㜳ᕋ䎭⸣䐥εȾ
࠽䇉䠇ኢ䜞Գ᧛䀮ݻ䴱ಞⲺ䴱⊖䜞Գδᴿ⸣䐥ধₕεȾ
ۻֵ⭞0㌱㎧ݻ䴱ಞቃ0㌱㎧䴱⊖䙨㺂ݻ䴱Ⱦ䄁ֵ⭞ެ
Ԍ㌱㎧Ⲻ䴱⊖Ⱦ
у᣼䯁䴱⊖ૂݻ䴱ಞȾ䴱⊖ૂݻ䴱ಞᗻ举ݨ㰅൞Ҵ⠛Ⲻグ
䯉θ䇉☋≙┨ޛȾᗻ举㏉ᑮؓᤷҴ⠛Ⱦ
൞ᾫㄥ䋖䔿ᡌᾫㄥⓡᓜсθᩃ༔Ⲻ䴱⊖㜳╅࠰ޝ䜞䞮⏨Ⱦ㤛
⻦䀮ࡦ䴱⊖䞮⏨θ䄁঩ࡱ⭞㛛Ⲹ㠽␻≪⍍ৱȾ㤛䞮⏨᧛䀮ࡦ⵲
ⶑθԛ␻≪⋌⍍㠩ቇ࠼䩎ᗂ㄁঩ቧ䟡Ⱦ
䱺ࣖ䴱⊖ᆿޞ䆜઀
 䆜઀έ⛰Ҽ⑑ቇഖ⸣䐥㙂ቄ㠪⚡⚳ȽӰ䓡ۭᇩૂ⭘૷ᩃ༔
Ⲻ仞䳠θ䄁ሽᐛޭȽ䴱⊖㍺ᡌݻ䴱ಞ⎮⋈൞⍷儊ѣᡌֵ⍷儊
⍷ޛެѣȾ㞆㶋ᙝᡌቄ䴱ᙝ⍷儊δྸ⎭≪ȽḆӑᐛᾣᆮ૷Ƚ
ԛ┸ⲳࣇᡌ┸ⲳࣇⲺ⭘૷ㅿε䜳ᴹቄ㠪⸣䐥Ⱦ
 䆜઀έᵢ⭘૷жف䤦䴱⊖䡋ᢙ䴱⊖Ⱦжف᯦Ⲻᡌᐨֵ
⭞Ⲻ䴱⊖ൽ㜳ቄ㠪೪䠃Ⲻޝ䜞⚲ۭȾྸ󰵳೛ᡌ䙨ޛ䓡儊θ
൞⸣⸣ቅᱸޝቄ㠪↱ӗȾᗻരᇐ䴱⊖㬁Ⱦྸ󰵳⋈ᴿ⢘ര
䰒䮿θ䄁ڒ↘ֵ⭞⭘૷θ࠰䴱⊖θќሽެ䚖䴘ވㄛȾྸ󰵳ᛞ
䃃⛰䴱⊖㜳ᐨ㏉೛ᡌ䙨ޛӰ儊θ䄁㄁঩ቧ䟡Ⱦ
⢯ᇐֵ⭞ồԬ
ᵢ䔃࠶䤮㜳བ࠽ࢨ⹃сᵞ乣Ƚງᯏૂ䠇ኢȾᆹ㜳བ⴪࠽Ƚᯒ
࠽Ƚᴨ࠽൞ޝ䜞࠽ࢨȾᆹ࠽ࢨ㇗䚉θќъԛሽ㺞䶘喀ᒩ൦
࠽ࢨȾ
䄁ሽᵢ⭘૷⭞᯲Ա֋ެԌⴤⲺȾ
䴱࡬ಞ
⮬䀮Ⲳಞ㻡䠁᭴ᱸθ䴱࡬ಞ᧛θቄ㠪࠶⡽ڒ↘ќݷ䁧ᛞ
㒲㓂ᐛ֒Ⱦж㡢㙂䀶θ䤮⡽൞〈ޝڒ↘Ⱦ❬㙂θ㜳ഖ儼䯁
ᢩₕ㼳ಞ೏㙂ᔬ䚨Ⱦᴿᱸ࡬ಞ㜳ᇂޞ䥥䚄Ⱦྸ󰵳࡬
ಞ㏉ᑮ䥥䚄θ⭘૷䴶㾷⭧ᦾ⅀Ⲻ0,/:$8.((ᵃₕ 䙨㺂㏣
ؤȾ
൞ᗔᐛԬрс䤮⡽ҁࢃθᗻ举ݾㅿᖻ䤮⡽ᇂޞڒ↘Ⱦ
䴱⊖
ѻᵠֵ⭞Ⲻ䴱⊖ᗻ举䠃᯦ݻ䴱ᗂ߃ֵ⭞Ⱦ
䎻䚄e&δe)εⲺ儎ⓡᴹ䲃ք䴱⊖Ⲻ᭾㜳Ⱦ䚵ރᳪ䵨᯲
儎ⓡᡌ䲳ݿсδ㜳ቄ㠪䚄⟧εȾ
ݻ䴱ಞૂ䴱⊖㍺Ⲻ᧛唔㲋៿ؓᤷ␻▊Ⱦ
⛰⻰ؓᴶ֩䴱⊖ֵ⭞༳ળθ䴱⊖㍺ֵ⭞ᗂ៿߃ᇂޞݻ䴱Ⱦ
⛰⻰ؓ䴱⊖Ⲻᴶ䮭༳ળθݻ䴱ᇂᡆᗂθሽ䴱⊖㒲㓂⮏൞ݻ
䴱ಞрȾ
䴱⊖ݨᆎᱸ䯉䮭᯲ᰛφ
●ሽ䴱⊖㍺ᆎ᭴᯲ⓡᓜք᯲e&Ⲻ⫦ູθъ䚵ރ▤χ
●ሽ䴱⊖㍺ؓᤷ൞ݻ䴱䠅Ⲻ⣶ខχ
●ᆎ᭴ѣⲺ䴱⊖㍺៿∅ޣفᴾ➝ᑮݻ䴱ж⅗Ⱦ
䴱⊖ؓ䆭
൞ᾫ儎Ⲻᢣ⸟Ƚ㌺ᶕȽཧ䙕ૂ⸣䐥᛻⋷сθቄ㠪ཝ䴱⍷⎾㙍θ
⭘૷ሽڒ↘㌺〈䩎θ❬ᗂ⭘૷ሽ䰒䮿Ⱦ䠁᭴ᢩₕԛக⭘૷Ⱦ
൞ᾫㄥ᛻⋷сθ䴱⊖㍺ޝ䜞Ⲻⓡᓜ㜳䚄儎Ⱦྸ󰵳Ⲳ⭕䙏つ᛻
⋷θ䴱⊖ሽ᳡ᱸڒ↘䚁֒Ⱦ
䚁䕮䤦䴱⊖
䤦䴘ᆆ䴱⊖举࡬᯲ধ䳠૷⌋ׁⲺ㾷≸Ⱦ
䚁䘷䤦䴱⊖ᗻ举൞ㅜ⮬൦Ƚുᇬു䳑⁏Ⓦ⌋ׁⲺ᛻⋷с
䙨㺂Ⱦ
●ֵ⭞㘻᯲䲮൦р䚁䘷䴱⊖㙂∁举䲆χ
●ㅢпᯯ䋖䋢Ⲻ୼ᾣᕅ䤦䴱⊖䚁䘷举࡬᯲ধ䳠૷⌋ׁȾ䚁
䘷Ⲻ乆ۏ䚄ぁᗻ举⭧೪Ṳ䁉㐪ⲺӰ༡䙨㺂θӜᗻ举ᗍ
ࡦሾᇬ൞๪ⴙ㇗Ⱦ
䚁䘷䴱⊖ᱸφ
●䄁⻰ؓ䴱⊖᧛䀮㍸ㄥࡦ೪ᇼؓ䆭㏉䚄㎋㐙θ䱨↘⸣
䐥χ
●䄁⻰ؓ䴱⊖㍺࿛஺㼓θ䱨↘⻦󰩵⼞ᬜχ
●࠽䚁䘷ᴿ㻸Ⰻᡌ⍟╅ѣⲺ䴱⊖Ⱦ
㠽䙕䚔ޢ㐀ᇼ㚥㒡ԛ⦨ᗍ䙨ж↛䋽䁀Ⱦ