MIMAKI JFX 200-2513 User manual

Mimaki Europe B.V.
Industrial Products
18-11-2014
Ver1.3EU
Product Guide

Mimaki Europe B.V.
Industrial Products
Terms of use
•The contents of this presentation are intended only for Mimaki authorized
resellers. Authorized persons are not permitted to distribute, copy or
change this presentation without explicit approval of Mimaki Europe B.V.
•Contents and technical explanations in this presentation are based on the
test results achieved at Mimaki at the time of testing and are not a
guarantee for performance. Substrates should be tested beforehand.
•In addition, the contents in this presentation do not lead to any legal
obligations from Mimaki and Mimaki does not take any responsibility.
Please verify in advance whether your intended prints will result in
sufficient quality.
•Contents of this presentation are subject to change without prior notice for
improvement. Compositors errors reserved.

Mimaki Europe B.V.
Industrial Products
Product Information
•A new member, JFX200-2513, joined the JFX family
•JFX200-2513
•The low entry model of the JFX line,
having the high quality print technology
of the Mimaki JFX product line
3
Machine Width Depth Height Weight
JFX200-2513 4,400mm 2,250mm during installation
2,450mm during operation 1,250mm 650kg
JFX500-2131 4,100mm 4,462mm 1,490mm 1,353kg

Mimaki Europe B.V.
Industrial Products
Product Information
•New layout
4
JFX500-2131
JFX200-2513
2100mm
3100mm
2500mm
1300mm
106mm
Print area
159mm
Head configuration

Mimaki Europe B.V.
Industrial Products
JFX200-2513 Features
•The balance between quality and speed with the technology from the JFX
series
•High quality by Mimaki’s image quality control technology including MAPS2 and
variable dot printing
•High productivity is accomplished by the new print head technology and high speed
curable ink
•Able to print full-Color and Clear ink in one job production
•High productivity printing of, fast and beautiful clear finish, productions with less
dust attachments
•Easy operation, by an operator friendly new design
•Operation panel, Vacuum valve and Ink system are all located on the front side
Most operations such as operating machine, switching vacuum ON/OFF,
replacement of inks and setting of media can be done at the front of machine
•Layout pins are helpful for setting the media at the origin
5

Mimaki Europe B.V.
Industrial Products
JFX200-2513 Features
•Reliability accomplished by stable printing
•Ink circulation system prevents white ink from settling
•Nozzle recovery function allows for continuous printing even if nozzles
are clogged by using other normal nozzles
•Environmentally-friendly LED-UV curing light
•Long life UV lamps with low power consumption
•Eliminating risks associated with heat such as
media deformation and media discoloration
•Ink supply system
•The low cost ink supply system
•The ink bottle (1L) is directly usable
6

Mimaki Europe B.V.
Industrial Products
JFX200-2513 Features
•Print speed
•With the CMYK configuration: maximum 25m²/h
•With the CMYK plus White configuration: maximum 12.5 m²/h
•With the CMYK plus White and Clear configuration: maximum 12.5 m²/h
•New table with internal honeycomb structure for extra stability
•An reduction of the weight by unifying vacuum area
•Rack and pinion feeding method is implemented
•Stable transportation system
•The installation time is reduced
•New integrated packing
7

Mimaki Europe B.V.
Industrial Products
Environmentally conscious LED-UV curing unit
•Little VOC (Volatile organic compound), no ozone production
•Little VOC and less odor, no special ventilation systems are required
•Energy-efficient and cost reduction
•Generates less heat and turns on only when needed
•Reduction of the total cost by less energy consumption
•The reduction of the heat impact
•The material reaches an temperature of 70⁰C, when using metal halide lamps, causing media deformation
•LED-UV enables to print on cheaper media
•No need for special expensive ventilation and installation costs
•The improvement of production circumstances
•The long-life LED UV lamp (approx. 5000 hours), which needs less maintenance, permits the increase in
productivity. *The life-time of the metal halide lamp is about 700 hours
•The LED UV lamps turn on and off instantly
•LED UV lamps are ready to be used immediately, directly after the printer is turned on
•An metal halide lamp requires warm up and cool down time
8

Mimaki Europe B.V.
Industrial Products
Configuration
9
USB 2 0
5m (15ft) cable is recommended
Corresponds with PS,EPS,TIFF,BMP,JPEG, etc.
Output / Installation
Basic Configuration
&
Recommended hardware specifications
CPU: Core i5 3.1GHz
Memory: 4GB
HDD: 500GB
I/F : USB2.0 4 ports or more
ODD: DVD-ROM
OS: Windows7 / 32bit / Pro
Monitor: 1366x768

Mimaki Europe B.V.
Industrial Products
Introduction of MCC
•MCC, Mimaki Clear Control
•MCC is the new function added to the JFX200-2513
•MCC enables to do full color printing and Clear printing at the same
time
•Advantage1, Reducing the attachment of dust
•Previously, dust attached easily to the surface of materials
during clear ink printing
•MCC reduces the risk that dust could attach
•Advantage2, Easier process
•In the past it was needed to divide the printing process into 2 stages:
clear-printing and full color printing
•MCC enables to print these together in 1 go and reduces the
production time
10

Mimaki Europe B.V.
Industrial Products
Application of clear ink
•3 types of finishes
•Glossy finish
•Matte finish
•Emboss finish
•Various appearances
•Overall print
•Partial Print
•Texture print
11

Mimaki Europe B.V.
Industrial Products
New developed MCC
•CMYK: LH-100 or LUS-150 are available
•Clear ink: LH-100 is available and working with LUS150 and LH100
•Printing with clear ink will reduce the flexibility of the print with LUS150
•Please test the print quality on fore hand
12
Clear Glossy printing
No clear Ink
Partial
texture Print
Partial Gross Print
and matte Print

Mimaki Europe B.V.
Industrial Products
Head placement / Print speeds
•Two print heads are aligned in stagger configuration
•Simultaneous printing of color and white is attained by the white ink model
•CMYK
13
0 5 10 15 20 25 30
1200x1200 16Pass
Uni/Hi
600x900 12Pass
Bi/Hi
600x600 8Pass
Bi/Hi
300x450HQ 6Pass
Bi/N
m²/h
MMKK
CCYY
25sqm/hr
(268.8 sq.ft./hr)
18sqm/hr
(193.5 sq.ft./hr)
12sqm/hr
(129.0 sq.ft./hr)
3.4sqm/hr
(36.5sq.ft./hr)
High Speed
Production
Standard
High Quality
*8boards/hr (4‘ x 8 ‘ )
*6boards/hr (4‘ x 8 ‘ )
*4boards/hr (4‘ x 8 ‘ )
*1boards/hr (4‘ x 8 ‘ )
MYKC
Scan direction

Mimaki Europe B.V.
Industrial Products
Head placement / Print speeds
14
0 2 4 6 8 10 12 14 16 18 20
1200x1200 32Pass
Uni/Hi
600x900 24Pass
Bi/Hi
600x600 16Pass
Bi/Hi
300x450HQ 12Pass
Bi/N
Scan direction
MKC
Y
ClClWW
12.5sqm/hr
(134.4sq.ft./hr)
6.2sqm/hr
(66.6 sq.ft./hr)
1.7sqm/hr
(18.2sq.ft./hr)
High Speed
Standard
High Quality
*4boards/hr (4‘ x 8 ‘ )
*2boards/hr (4‘ x 8 ‘ )
*0.5 boards/hr (4‘ x 8 ‘ )
9.0sqm/hr
(96.7sq.ft./hr)
*3boards/hr (4‘ x 8 ‘ )
Production
Cl
MKCWY
•CMYK + White + Spotcolor (Clear)
m²/h

Mimaki Europe B.V.
Industrial Products
MAPS 2 (Mimaki Advanced Pass System)
•With MAPS2, both feeding stripes and color changes are reduced
•MAPS 2 eliminates banding by dispersing ink
drops between the passes
•This technology is improving the print quality,
when printing in high productivity modes and
the uneven print density at solid color area’s
are reduced
•By printing in [AUTO] mode of MAPS2, the
condition of MAPS2 is automatically selected
for every print mode
•The print speed does not change by using MAPS2
15
MAPS: OFF (Normal)
MAPS: ON

Mimaki Europe B.V.
Industrial Products
High Quality Printing
•The Variable dot
•The variable dot, printing in 3 different
dot sizes of small, medium and large
•Realizes a high image quality printing
with the smooth gradation
•Small characters sharp without
granular appearance
16
Variable dot
Normal dot

Mimaki Europe B.V.
Industrial Products
Print on the thick and heavy media
17
•Printing on the substrate of up to 2 inches (50mm) thick
•The maximum loadable weight of substrate is up to 110lb (50kg/m²)
•About the head gap
•The gap between the head and the substrate should be less than 2mm
•If the gap is set wider than 2mm, the ink drop tends to become mist before it reaches onto the substrate
•Furthermore, if the gap is to wide, the reflected light from the UV curing lamp increases. This leads to a cause of an
error of the ink droplet onto the substrate or the nozzle clogging, because the reflected light may increase the
viscosity of the ink mist
Media
Scan Direction
Less than 2mm of head gap
is recommended
The thickness of media
should be less than 50mm

Mimaki Europe B.V.
Industrial Products
Vacuum area
•Standard equipped with an Vacuum unit
•The vacuum is controlled, On or Off, via the operation panel
•Vacuum area is divided in X direction
•Depending on the media size, open or close the valve, to control the suction area
18
V1
V2
775mm
525mm
1,300mm
Front Origin
2,500mm
Divided in X direction
Valves

Mimaki Europe B.V.
Industrial Products
Layout Pins
•Delivered with the layout pins
•Place able at 8 inches (200mm) apart in stagger configuration, at the front of the table
•Easy to place the substrate at the origin
•Just set the layout pins and position the substrate against the layout pins
•The scale allows for the accurate setting of the media.
•When using layout pins, use a substrate with thickness of minimum 3mm or more. The
height of the pin is 3mm
19
Ten pieces are supplied with
the machine
Layout pins

Mimaki Europe B.V.
Industrial Products
Reliable printing
•Automatic measurement of media
thickness
•No need to measure the thickness by hand and
reducing operator interactions
•The gap pin on the left side of the carriage
automatically measures the thickness of media
•When needed, the head gap can also be set
manually by steps of 0.1mm
•Media Jam Censor
•Preventing print heads from hitting the media
•When the media height is set incorrectly or the
media is deformed, the sensor hits the media
and the carriage stops to protect the print
heads
20