Mindray DPM 4 User manual

Quick Reference Guide
Central Station

Note: The DPM4 Quick Reference Guide is not
intended as a replacement to the Operating
Instructions. Prior to operating equipment, the user
must be familiar with the Operating Instructions
Manual contents. This document is a guideline only to
be used as an aid to comprehensive Inservice Training.
P/N: 046-001981-00 Rev A

Overview ................................................1
Removing Cleaning Plug from SpO2Module..............1
Enabling the SpO2module ...............................1
Installing the SpO2patient cable and sensor..............2
Displaying the SpO2waveform ...........................2
Printing Real Time SpO2Waveform .......................3
Patient Alarms ...........................................3
Viewing and Printing Trends..............................5
Viewing and Printing Events .............................5
Disabling the SpO2Module ..............................6
Cleaning the SpO2Module ...............................7
Frequently Asked Questions..............................7
Admit a Patient without Patient Information..............2
Admit a Patient and Enter Patient Information ............2
Discharge a Patient ......................................2
Set a NIBP Interval .......................................3
Set Alarm Limits .........................................3
Silence Active Alarm(s) ...................................4
Pause All Alarms .........................................4
Set Screen Configuration
(Standard, Trends, OxyCRG, or Large Fonts) ...............4
Change Waveform Configuration .........................4
Change Waveform Order .................................5
Initiate Standby..........................................5
Resume Monitoring from Standby........................5
Record Real Time Recording Strip ........................5
Record Trend Table.......................................6
Record NIBP Measurements ..............................6
Record Alarm Events .....................................6
Table of Contents
P/N: 046-001981-00 Rev A 1

Admit a Patient without Patient Information
Using Control knob on control panel
 •ScrollandselectMenu
 •ScrollandselectPatient Setup
 •SelectQuick Admit
 •SelectYes to confirm clearing prior data and
 •SelectPatient type (size)
 •SelectOK to confirm and return to normal screen
Admit a Patient and Enter Patient Information
Using Control knob on control panel
 •ScrollandselectMenu
 •ScrollandselectPatient Setup
 •SelectAdmit
 •SelectYes to confirm clearing prior data and
 •Scrollandselecttoenterpatientinformation
 •SelectOK to confirm and return to normal screen
Discharge a Patient
Using Control knob on control panel
 •ScrollandselectMenu
 •ScrollandselectPatient Setup
 •SelectDischarge Patient (Clear Patient Data)
 •SelectYes to confirm clearing prior data and return
to normal screen
Note: Clear Patient Data is present if patient
information is omitted.
Quick Reference Guide
Central Station
P/N: 046-001981-00 Rev A 2

Set a NIBP Interval
Using Control knob on control panel
 •ScrollandselectNIBPtile
 •ScrollandselectInterval
 •Scrolltoselecttime
 •ScrollandselectExit to return to normal screen
Set Alarm Limits
Using Control knob on control panel (Option 1)
 •ScrollandselectParametertile
 •ScrollandselectAlm HI/Alm LO
 •Scrolltoadjustalarmlimit
 •ScrollandselectExit to return to normal screen
OR
Using Control knob on control panel (Option 2)
 •ScrollandselectMenu
 •ScrollandselectSystem Setup
 •ScrollandselectAlarm Setup
 •SelectAlm Sel
 •Selectparameter’sAlm Setup
 •ScrollandselectAlm HI/Alm LO
 •Scrolltoadjustalarmlimit
 •ScrollandselectExit to return to normal screen
Quick Reference Guide
Central Station
P/N: 046-001981-00 Rev A 3

Silence Active Alarm(s)
Press and hold Silence button >2 seconds. If new alarms
occur, system silence will be terminated
Pause All Alarms
Press Silence button. All alarms are paused for a
preconfigured time (1, 2, or 3 minutes). All visual and
audio alarm notification is suspended. Alarm notification
will resume if Silence is pressed a second time or once the
preconfigured time has elapsed.
Set Screen Configuration
(Standard, Trends, OxyCRG, or Large Fonts)
Using Control knob on control panel
 •ScrollandselectMenu
 •ScrollandselectSystem Setup
 •ScrollandselectFace Select
 •Scrolltoselectscreen
 •ScrollandselectExit to return to normal screen
Change Waveform Configuration
Using Control knob on control panel
 •ScrollandselectMenu
 •ScrollandselectSystem Setup
 •ScrollandselectTrace Setup
 •Scrollandselectwaveform(s)tobedisplayed(A√in
the waveform box indicates waveform is selected)
Quick Reference Guide
Central Station
P/N: 046-001981-00 Rev A 4

Change Waveform Order
Using Control knob on control panel
 •ScrollandselectMenu
 •ScrollandselectSystem Setup
 •ScrollandselectTrace Setup
 •ScrollandselectWave Sequence
 •Scrolltoselectchanneltochange
 •Selectparameter
 •ScrollandselecttoExit to return to normal screen
Initiate Standby
Using Control knob on control panel
 •ScrollandselectStandby
 •ScrollandselectYes to confirm
Resume Monitoring from Standby
Press any key on front panel and Scroll and select Yes
to confirm
Record Real Time Recording Strip
 •SelectRecordkeyoncontrolpanel
 •SelectRecordkeytostop(ifcontinuousmodeis
enabled)
Quick Reference Guide
Central Station
P/N: 046-001981-00 Rev A 5

Record Trend Table
Using Control knob on control panel
 •ScrollandselectMenu
 •ScrollandselectTrend Table
 •ScrollandselectResolution
 •Scrolltoadjusttimeinterval
 •ScrollandselectREC to record
 •ScrollandselectExit to return to normal screen
Record NIBP Measurements
Using Control knob on control panel
 •ScrollandselectMenu
 •ScrollandselectNIBP Recall
 •ScrollandselectREC to record
 •ScrollandselectExit to return to normal screen
Record Alarm Events
Using Control knob on control panel
 •ScrollandselectMenu
 •ScrollandselectAlarm Recall
 •ScrolltoadjustStart/End time
 •ScrollandselectAlarm Recall Event to select
sorting criteria
 •ScrollandselectAlarm Recall to view alarm event
or UP-Down to view other alarm events
 •ScrollandselectREC to record
 •ScrollandselectExit to return to normal screen
Quick Reference Guide
Central Station
P/N: 046-001981-00 Rev A 6