Mini Gadgets BBSBLUETOOTHCLOCK User manual

1 Version 1.1
Bush Baby Stealth Bluetooth
Clock With Hidden Camera
SKU: BBSBLUETOOTHCLOCK

2 Version 1.1
THANK YOU FOR PURCHASING THE
BBSBLUETOOTHCLOCK
Please read this manual before operating the
camera and keep it handy.
Your purchase should include:
1 x Bush Baby Stealth Bluetooth Clock
1 x Bush Baby Remote Control
1 x Power Adapter
1 x User Manual
1 x Instruction Booklet
1 x 16GB MicroSD Card
1 x MicroSD Card Reader

3 Version 1.1
GET FAMILIAR WITH YOUR
BBSBLUETOOTHCLOCK

4 Version 1.1

5 Version 1.1
OPERATING THE CAMERA
Note: If you are not located in the US, or if you
intend to use this product anywhere other than
the US, you will need to purchase a converter in
order to use the AC wall plug in and avoid
damaging the product. Because different
countries use different voltages in their
electrical wiring, you will need a converter that
adapts to the current in your particular country.
POWERING THE DEVICE
1. This device is operated by plug-in power
only. You will need to plug the device’s
power plug into a functioning outlet in
order to operate the device.
HOW TO TURN ON THE CAMERA
1. Point the remote control towards the
back of the Bluetooth Clock, and press
the “Power Button” (see page 4). The

6 Version 1.1
indicator LED light on the back of the
clock will turn on.
2. The camera is now in Standby Mode.
NOTE: If the light doesn’t come on, try many
different angles when pressing the power button
and point it at the front of the device. Do not
hold down the power button. Press and release
the button only.
HOW TO RECORD VIDEO
1. In standby mode, press the “Video
Button”on the remote control one time
(see page 4). The indicator light on the
back of the device will flash three times,
and then turn off.
a. Videos will be recorded
continuously and saved in 20
minute intervals.
HOW TO STOP RECORDING VIDEO

7 Version 1.1
1. While the camera is recording video,
press the “Video Button” once more.
(The indicator LED will turn on).
2. The camera has now stopped recording
and is now in Standby Mode.
HOW TO TAKE PICTURES
1. When the camera is in Standby Mode,
press the “Photo Button” (see page 4).
The indicator LED will flash once.
2. Once the indicator LED flashes, the
picture has been taken.
HOW TO RECORD IN MOTION DETECTION
1. In Standby mode, press the “Motion
Detection Button”one time (see page
4). The indicator light will flash three
times and then turn off.
2. The unit is now in motion detection
mode and will begin recording video
once motion is detected. There will be

8 Version 1.1
no LED indicator to indicate when
motion is detected.
HOW TO STOP RECORDING MOTION DETECTION
1. While the camera is recording motion
detection, press the “Motion Detection
Button” once more. (The indicator LED
will turn on).
2. The camera has stopped recording
motion detection and is now in Standby
Mode.
SETTING THE DATE/TIME STAMP
Note: You will need to remove the MicroSD
card from your device and plug it into your
computer using the supplied card reader. (See
page 3 to locate MicroSD card slot)
1. Visit http://time.mgidownloads.com/
2. Choose “All Bush Baby Stealth” from the
device SKU dropdown.

9 Version 1.1
3. Choose your time zone from the time
zone dropdown.
4. Click Submit.
5. The appropriate time file will be
downloaded to your computer’s
downloads folder.
6. Open your “downloads”folder on your
computer.
7. Find the time file that was downloaded.
(It should be the most recent download
and the name will match what you saw
in your browser download notification).
8. Right click on the file and choose
“Copy”.
9. Locate “Removable Disk” inside the
(My) Computer folder.
AutoPlay Removable Disk > Open
folder to view files

10 Version 1.1
Or…
Go to Start > Computer >
Removable Disk

11 Version 1.1
10. Open the Removable Disk drive.
11. In the blank area below any existing
folder or files (if present), right click
with your mouse and choose “Paste”.
12. The time file you copied from your
“downloads”folder should appear.
13. Safely eject the MicroSD card from your
computer and re-insert it into your
device.
Power on the device and do a test recording to
confirm the time/date setting succeeded.
MICROSD CARD SLOT
Please see page 3 to locate the MicroSD card
slot on the back of your device.
2. Gently push the MicroSD Card into the
slot. The gold contacts on the card will
be inserted first, and they should face
the main circuit board. You will feel

12 Version 1.1
some spring resistance before the card
clicks in to place.
a. Never force the card into the
Card Slot under any
circumstances. Otherwise, the
unit or the MicroSD card itself
will be damaged.
3. To remove the SD card, gently push the
card in so that it clicks. The internal
spring tension will eject the card.
MicroSD cards 65GB and above will require
special formatting to work. The device will not
function with these cards if they are not
properly formatted beforehand.
Visit www.mgidownloads.com/Software and
download the “guiformat.zip” file. Extract the
files and follow the instructions in the “64GB SD
Card Formatting.pdf” document.

13 Version 1.1
IMPORTANT NOTICE: Ensure that the Bluetooth
Clock is off before inserting the MicroSD card.
Otherwise potential corruption of the card file(s)
may occur.
RETRIEVE THE FILES TO YOUR PC
1. Remove the MicroSD Card from the
device and plug it into your computer
using a card reader. (See page 3 to
locate the MicroSD card slot on your
device).
2. Locate “Removable Disk” inside the
(My) Computer folder.
AutoPlay Removable Disk > Open
folder to view files

14 Version 1.1
Or…
Go to Start > Computer >
Removable Disk

15 Version 1.1
3. Open the Removable Disk drive.
4. Open the video files folder.
5. Double click the file you want to view.
VLC Player is recommended for
watching videos.
COPYING AND DELETING YOUR FILES
The video files created are just like any other
file on your computer, and can be managed in
the exact same manner.
To save a file, you want to select the
file, right click your mouse on the file
name, and then choose “Copy” from the
menu. Next, go the location you want
the save the file to. Right click your
mouse, and then chose “Paste.” This will
copy the file to your computer.
To delete a file, right click your mouse
on the file name and choose “Delete”
from the menu. You can quickly select

16 Version 1.1
all of the files by pressing “CTRL+A” on
your keyboard.
If you are using MAC OS X, you must
empty the trashcan after you delete a
file. If this is not done, the SD card will
fill with hidden files, and the device will
no longer record new files.
TROUBLESHOOTING
THE DEVICE WON’T TURN ON
Make sure the power cable is securely
plugged into a functioning electrical
outlet.

17 Version 1.1
THE DEVICE HAS CRASHED
You need to reset the device by
unplugging and plugging in the device.
DEVICE CONTINUALLY RECORDS IN MOTION
MODE
Motion detection is measured by
changing pixels during recording. Any
kind of motion including shifting
shadows or changing lighting conditions
can set off motion detection.
OTHER PROBLEMS
Call our technical support at 770–694–
6923
SPECIFICATIONS
Video
Resolution
1920x1080
Video Format
.AVI

18 Version 1.1
Frames per
Second
Up to 30 fps
Vision Angle
75°
Motion
Detection
6 meters for straight-line
distance
Photo
Resolution
1600 x 1200
Photo Format
.JPG
Type of
Memory
External MicroSD
Memory
Capacity
Up to 128GB with special
formatting. See
http://mgidownloads.com.
Go to
Product Manuals -> 64GB
SD Card Formatting.zip
Recording
Capacity
1GB ≈ 10 minutes
USB Interface
2.0 USB
Player Software
VLC recommended

19 Version 1.1
Operating
Systems
Windows XP & Up
Mac OSX 10.5 & Up

20 Version 1.1