Minuteman Powerboss 3800 User manual

3800 Squeegee Assembly
Minuteman Powerboss INC
Aberdeen, NC
Page 1 of 22
383794

MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 2 of 22

401006
401006
400301
400301 401007
401007
401008
401008
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 3 of 22

• Press roll pins into
castings use tool to insure
pins are identical in height
on back side of casting
3/8”
• Note: Use Arbor press to
Press in Pins & Special
Tool to set height of pins
on Rear of Squeegee
Frame.
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 4 of 22

1) 3400032-SCR-HEX, 3/8-
16X0.75 ZP (2ea)
2) 3400101-Washer-Lock 3/8
Split ZP (2ea)
3) 712562 – BLT-HH ¼-
20X.75 SS (4ea)
4) 712758 – WSR-HELICAL
¼ SS (4ea)
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 5 of 22
Mount PN:
3330589(Weld-3800
SQU TOP PLT RT),
PN: 330592(Weld-3800
SQU TOP PLT LT) to
casting using:
3124

• Place rear squeegee PN:
383607-(3800 REAR
SQUEEGEE BLADE
NEW) on squeegee
casting PN:383623 (3800
SQ CASTING MCHD,
NEW).
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 6 of 22

• Place Rear strap
3330572 (Weld-3800
Squ back strap) on rear
squeegee secure with
latch 281075-
(Squeegee Latch, 2800)
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 7 of 22

Secure Rear Squeegee & Strap
to Frame with Latch
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 8 of 22

• Place front Squeegee
383606(3800 Front
Squeegee Blade, new)
on casting 383623 –
(3800 SQ Casting
Mchd, new)
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 9 of 22

• Place front strap 3330591-
(Weld-3800 Squ front
Strap) on squeegee secure
with thumb screw
3401001-SCR-Thumb
3/8-16x1-1-1/2 SS.
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 10 of 22

•Place Gasket PN: 383792 (Gasket-
Squeegee Mnt Brkt)on Casting PN:
383623 (3800 SQ CASTING
MCHD, NEW).
Page 11 of 22

MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 12 of 22

1. 320154 – Squeegee Mount Weldment
2. 383424 – MTG Bracket Right 11 ga
3. 383425 – Mount Bracket Left 11ga
4. 712562 – BLT-HH ¼-20x.75 SS
5. 712758 – WSR Helical ¼ SS
6. 383789 – Squeegee Mount Bracket
7. 711507 WSR–Flat .37 X1.12X.06
8. 400109– Clevis Pin
9. 711808 – Cotter Pin – Hair #13
1
6
254 78
9
3
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 13 of 22

• Take PN: 762022 Plt (Adj
Nut -LH) & thread on Left
side of PN: 750689 (Adj
Stud).
• Take PN: 3400320 (Hex Nut
5/16 – 18 SS) & Thread on to
Right side of Adj Stud
• Take PN: 762257 Plt &
thread on to Right side of Adj
Stud
762022PLT 750689
3400320
762257PLT
750689
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 14 of 22

383425 383424
711808
400711
711507 (2) Assembly
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 15 of 22

• Attach 383424 (Mtg Brkt- RH
11ga) & 383425 (Mtg Brkt-
LH_ to to PN: 750154 Sg mtg
wmt using:
• PN:711668(Clevis pin 3/8 X
1”11-141 )
• PN:711509 – (2) (Wsr-Flat
.37X1.12x.06)
• PN:711808
(Cotter Pin – Hair #13)
• PN: 711713(Retaining Ring-E
Ext .50)
• PN: 711524(Wsr-Wave
.52X.87X.01)
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 16 of 22

Complete Assembly of
Squeegee Mount Plate
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 17 of 22
711713 711509 (2)
711544 (4)
712562 (4)
•711713-Retaining
Ring-E ext .50
•711509-Washer
Flat ½
•711544- Washer
Helical ¼
•712562-BltHH-
1/4-20x.75 SS

(2)711367 -Nut-Wing 3/8-16 Stpl (2) 430325 –Caster Wheel 2.50 DIA
Jarvis PN; 3-713-000 GS
Page 18 of 22

1. Place PN: 762257 Plt into
hole in bracket top & secure
(fasten into bracket to PN:
383789 with 4 ¼-20 x .75 SS
sen & (4) 1/20 helical washers
& (4) ¼-20 SS Flt washer
2. Thread PN: 430325(Caster
Wheel 250 DIA. Jarvis) into
PN: 383789 (Squeegee Mtg
Brkt Wmt) secure with PN:
711367 (Nut-Wing 3/8-16
Stpl)
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 20 of 22
Complete Assembly of
Squeegee Mount Plate

• Place PN: 383792 on
casting
• Mount Squeegee to plate to
casting using
• (2) ea. PN: 220249 Bolt
with ½ - 13 X .75 &
• (2) ea. PN: 711578 Plt Wsr
Brass
MODEL:3800 SQUEEGEE
DATE: 2-18-2003
DOCUMENTED BY: POWERBOSS
Page 21 of 22
711524
711713
712091