
Minuteman International, Inc. Copyright 2014
#999067 Rev. * 05/14
Page 2
PREFACE
INSTRUCTIONS FOR: K-661005 - KIT, SIDE BROOM RELAY REPLACEMENT
ITEM PART NO. QTY DESCRIPTION
1 661005 1 ADAPTER PLATE ASSY - AM7D RELAY
2 748961 1 RELAY, DPDT 12VDC 35A
3 711372 2 NUT-NYLOC 8-32
4 748437 1 WIRE HARNESS, RELAY AM7D
5 999067 1 KIT INSTR FOR K-661005, SIDE BROOM RELAY
A 3400298 4 SCR-PAN, #6-32X.50, SLT ZP (REUSE - ON CURRENT ASSY)
B 3400492 4 NUT-#6-32 ELASTIC STOP (REUSE - ON CURRENT ASSY)
C 3318859 2 RELAY-12 VDC SPDT (DISCARD - ON CURRENT ASSY)
Purpose:
This kit was developed to replace the two existing Side Broom Relays (#3318859) on your
machine with one relay (#748961).
Contents of Kit include:
BOM: Verify items 1-5 are in your Kit, and items A-C will be removed the machine.
Instructions:
Note: Turn off engine when following the Instruction Steps below.
Step 1: Remove items A, B, & C. (See Fig. 1)
Step 2: Remove machine wire harness/connectors from Relays (Items C).
Step 3: Assemble Adapter Plate (Item 1) to the machine using 4 Screws (Item A) and 4 Nuts
(Item B). (See Fig. 2)
Step 4: Assemble Relay (Item 2) to the Adapter Plate using 2 Nuts (Item 3). (See Fig. 2)
Step 5: Connect machine wire harness/connectors to assemble Relay (Item 2). Reference
wire/terminal connection chart and illustration. (See Fig. 3)
Fig. 1 Fig. 2