Mitsubishi Electric Mr. Slim NH33NBD User manual

Mr.Slim
Ductless Air Conditioning And
Heat Pump Product Guide
®
MMIITTSSUUBBIISSHHIIEELLEECCTTRROONNIICCSSAAMMEERRIICCAA,,IINNCC..
HHVVAACCDDIIVVIISSIIOONN
33110000AAVVAALLOONNRRIIDDGGEEPPLL..SSTTEE..220000,,NNOORRCCRROOSSSS,,GGAA3300007711
CCAALLLL::777700--661133--55884400OORR880000--443333--44882222((PPRREESSSS33)),,FFAAXX::880000--888899--99990044

DUCTLESS AIR CONDITIONERS
AND HEAT PUMPS
Mr. Slim systems are unlike any other
products in the HVAC category. Actually they’re
a category in themselves because Mr. Slim is
probably the most unique innovation in air
comfort in two decades and one that has made
us the worldwide leader in ductless.
We designed Mr. Slim air conditioners and
heat pumps to solve cooling and heating
problems that other systems have never
addressed, specifically spot or zone cooling
and heating especially in retrofit situations.
These are voids in comfort that central air and
room air simply can’t fill economically and
attractively.
Where Mr. Slim Fits.
You’ll often encounter a hot or cold spot in
existing buildings that already have large
central systems. Is the answer to remodel and
make way for more ductwork? Obviously that’s
a small fortune. Should you opt for room air?
It’s unsightly at best, expensive to run, and a
real security hazard.
Now you’re beginning to see how Mr. Slim
fits in. It’s the ideal supplemental system for
cooling or heating those smaller zones with
absolutely no ductwork, no remodeling, and
few disruptions to business and traffic.
Our system is energy
efficient and whisper quiet.
Its remote control keeps all
operating functions and
data within a glance and
in easy reach. And it
neatly tucks away into
corners, blending in
with the room’s decor.
How Mr. Slim
Works.
Basically Mr. Slim is two units: an indoor air
handler and an outdoor compressor unit.
The two connect via refrigerant lines
through a three inch diameter opening in the
wall or ceiling. In fact that’s the toughest part of
installation: one hole.
You can locate the compact outdoor
compressor unit anywhere up to 164 feet away
from the air handler on select models: in many
cases. Many models have a front service panel
that clearly exposes all connections.
The indoor air handler is as easy to install
as a ceiling fan. And both the indoor and
outdoor units are microprocessor controlled.
Simple remotes let you control all functions.
MITSUBISHI ELECTRONICS
HVAC DIVISION
COMFORT MADE SIMPLE.
1
Mr.Slim®

MMeeddiiuumm--ttoo--llaarrggeeccaappaacciittyyccoooolliinnggaannddhheeaattiinngg
ffoorrllaarrggeeaarreeaaccoommmmeerrcciiaallaapppplliiccaattiioonnss
PPCC//PPCCHH
Mr.Slim®
CEILING SUSPENDED UNITS
15

LARGE AREA COOLING AND HEATING MADE SIMPLE.
Intelligent Remote Controller
Highly advanced microprocessor technology is
one reason why Mitsubishi leads the air comfort
category. This ultrathin microprocessor remote
controller with LCD display gives you a variety of
functions and options to keep room comfort
perfectly balanced. It lets you
check Mr. Slim’s operating
conditions with just a glance. In the
rare case of a malfunction the self-
diagnostic system even indicates
specific problems for easy repair.
• Computerized Dehumidification
• Operation Mode Setting (Heat, Auto, Cool/Dry)
• Temperature Setting (in units of two
degrees fahrenheit.)
• Self-Diagnostic Display
• Room Temperature Display
• Twenty-Four Hour On/Off Timer
• Fan Speed Indicator
• Auto/Swing Vane Operation
• Memory (for storing operation functions)
• Low Ambient Operation
• Whisper-Quiet Operation
• EMS Gateway Available To Management System
Via RS-232 Cable
Outdoor Compressor Unit
Mr. Slim outdoor compressor units are
extremely efficient and reliable and true space-
savers.
These models can be installed up to 164
feet away from the indoor unit. They connect
simply through a single three-to-four inch
opening in the wall or ceiling. No ductwork or
remodeling is necessary. As many as ten units
can be installed in a row for major space
savings.
Outdoor units are designed with a front-
access service panel that provides easy access
to all maintenance points.
These units operate in outdoor
temperatures as low as zero
degrees fahrenheit
when the optional wind baffle is
installed. So you can cool spaces
such as computer rooms year
round.
Mr. Slim heat pumps also feature automatic
cooling/heating changeover for simple control
and lower maintenance. You never have to
readjust the unit.
Air Flow
These units offer a wide choice of air flow
directions. In the heating mode the vanes
automatically set the flow of warm air downward
at an angle of seventy degrees
fahrenheit . In the
cooling mode the vanes automatically set the
flow of cool air outward (horizontally). But you
can override the automatic setting to blend air
flow. Four directions may be selected: one
hundred percent downward, eighty percent
downward and twenty percent horizontal, sixty
percent downward, and forty percent horizontal
or one hundred percent horizontal. Jumbo
louvers automatically rotate right and left for
uniform air distribution over your entire space.
Redi-Charged System
Mr. Slim “P” series features the industry’s
first redi-charged refrigerant system. There’s no
longer any need to adjust the amount of
refrigerant to match the piping length on-site
unless lines exceed one hundred feet. You’ll
see a major reduction in installation time and
labor costs. Plus you can always count on Mr.
Slim’s reliability from day one because it’s
thoroughly charged and tested at the factory.
You know it’s going to work.
Hot Start System
Mr. Slim heat pumps provide warmth right
from the beginning.At the start of heating and
during defrosting, a very low fan speed
prevents the unit from blowing cold air into
the room. And a microprocessor-controlled
booster heater speeds the warming process.
16

17
Simplified Installation
Mr. Slim’s streamlined design makes indoor
units adaptable to an almost infinite variety of
room configurations. They’re simple to mount,
and they require a minimum of wiring. Naturally
they’re not only efficient but also whisper-quiet.
You’ll hardly hear them running.
Refrigerant lines may be connected to the
outdoor unit from the front, rear, or side or
beneath the base. This easy-access design lets
you arrange and install a number of units in a
small area.
Warranty
Mitsubishi is so confident of the reliability
of Mr. Slim®Systems that we offer a six year
warranty on the compressor and a one year
warranty on all other parts.
Air Conditioners
PC24EK
PC24EK
Cooling Capacity: 24,000 BTU/h
SEER: 10.3
Dimensions:
W:50-7/16”, D:26-13/16”, H:10-1/8”
PC30EK
Cooling capacity: 31,000 BTU/h
SEER: 10.4
Dimensions:
W:50-7/16”, D:26-13/16”, H:10-1/8”
PC36EK
Cooling capacity: 36,500 BTU/h
SEER: 10.2
Dimensions:
W:62-1/4”, D:26-13/16”, H:10-1/8”
PC42EK
Cooling capacity: 42,500 BTU/h
SEER 10.0
Dimensions:
W:62-1/4”, D:26-13/16”, H:10-1/8”
Heat Pumps
PCH24EK
PCH24EK
Cooling capacity: 24,000 BTU/h
SEER: 10.3
Heating capacity:
27,000 BTU/h (33,500 w/ aux. booster heat)
HSPF: 7.1
Dimensions: W:50-7/16”, D:26-13/16”, H:10-1/8”
PCH30EK
Cooling capacity: 30,000 BTU/h
SEER: 10.0
Heating capacity:
33,000 BTU/h (41,500 w/ aux. booster heat)
HSPF: 7.1
Dimensions: W:50-7/16”, D:26-13/16”, H:10-1/8”
PCH36EK
Cooling capacity: 35,400 BTU/h
SEER: 10.4
Heating capacity:
38,000 BTU/h (47,600 w/ aux. booster heat)
HSPF: 7.4
Dimensions: W:62-1/4”, D:26-13/16”, H:10-1/8”
PCH42EK
Cooling capacity: 42,000 BTU/h
SEER: 10.0
Heating capacity:
43,000 BTU/h (52,600 w/ aux. booster heat)
HSPF: 7.3
Dimensions: W:62-1/4”, D:26-13/16”, H:10-1/8”

ITEM MODEL
PC24EK PC30EK PC36EK PC42EK PCH24EK PCH30EK PCH36EK PCH42EK
Cooling *1 BTU/h 24,000 31,000 36,500 42,500 24,000 30,000 35,400 42,000
Capacity Heating *1 BTU/h — — — — 27,000(33,500) 33,000(41,500) 38,000(47,600) 43,000(52,600)
Heating *2 BTU/h — — — — 18,400(24,900) 18,000(26,500) 19,600(29,200) 24,800(34,400)
Power Cooling *1 kW 2.43 3.1 3.8 4.4 2.46 3.06 3.53 4.37
Consumption Heating *1 kW — — — — 2.42(4.32) 3.13(5.63) 3.4(6.2) 4.3(7.1)
Heating *2 kW — — — — 2.1(4.0) 2.6(5.1) 2.7(5.5) 3.2(6.1)
EER *1 9.9 10.0 9.6 9.7 9.8 9.8 10.0 9.6
SEER 10.3 10.4 10.2 10.0 10.3 10.0 10.4 10.0
HSPF — — — — 7.1 7.1 7.4 7.3
COP Heating *1 — — — — 3.3 3.1 3.3 3.1
Heating *2 — — — — 2.6 2.4 2.1 2.3
INDOOR UNIT PC24EK PC30EK PC36EK PC42EK PCH24EK PCH30EK PCH36EK PCH42EK
External Finish Munsell 2.5Y 8/0.3 & N2
Power Supply V, phase, Hz 115, 1, 60 230, 1, 60
Max. Fuze Size (time delay) A 15 15 15 15 20 25 25 25
Min. Ampacity 3 3 3 3 12 15 15 17
Fan Motor F.L.A. 1.8 1.8 2.1 2.4 0.7 0.7 1.3 1.3
Auxiliary Heater A (kW) — — — — 8.4(1.9) 10.8(2.5) 12(2.8) 12(2.8)
Airflow Hi-Lo Dry CFM 1,050-850 1,050-850 1,270-990 1,270-990 920-740 920-740 1,270-990 1,270-990
Wet CFM 900-730 900-730 1,100-860 1,100-860 830-670 830-670 1,100-860 1,100-860
Moisture Removal Pints/h 7.2 9.6 11.1 12.6 7.0 9.1 10.9 12.3
Sound Pressure Level Hi-Lo dB(A) 50-43 50-43 52-44 52-44 50-43 50-43 51-45 51-45
Cond. Drain Connection OD in. 1 1 1 1 1 1 1 1
W in. 50-7/16 50-7/16 62-1/4 62-1/4 50-7/16 50-7/16 62-1/4 62-1/4
Dimensions D in. 26-13/16 26-13/16 26-13/16 26-13/16 26-13/16 26-13/16 26-13/16 26-13/16
H in. 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8
Weight lbs. 93 93 115 115 97 97 119 119
OUTDOOR UNIT PU24EK PU30EK PU36EK PU42EK PU24EK PU30EK PU36EK PU42EK
External Finish Munsell 5Y 7/1
Sound Pressure Level dB(A) 55 55 55 56 55 55 55 53
Power Supply V, phase, Hz 230, 1, 60
Max. Fuze Size (time delay) A 20 30 30 40 20 30 30 40
Min. Ampacity 16 20 22 27 16 20 22 27
Fan Motor F.L.A. 0.65+0.65 0.65+0.65 0.75+0.75 0.8+0.8 0.65+0.65 0.75+0.75 0.75+0.75 0.8+0.8
Model (Type) NH33NBD NH41NAD NH47NAD NH569NXA NH33NBD NH41NAD NH47NAD NH569NXA
Compressor R.L.A.11.5 14 17.5 20 11.5 14 17.5 20
L.R.A.54 73 87 105 54 73 87 105
Crankcase Heater A(W) .17(39) .17(39) .17(39) .17(39) .17(39) .17(39) .17(39) .17(39)
Refrigerant Control Capillary Tube
Defrost method — — Reverse Cycle
W in. 34-1/4 34-1/4 38-3/16 38-3/16 34-1/4 38-3/16 38-3/16 38-3/16
Dimensions D in. 11-5/8 11-5/8 13-9/16 13-9/16 11-5/8 13-9/16 13-9/16 13-9/16
H in. 49-9/16 49-9/16 49-9/16 49-9/16 49-9/16 49-9/16 49-9/16 49-9/16
Weight lbs. 207 208 220 260 202 245 246 268
REMOTE CONTROLLER With Indoor Unit
Control Voltage (by built- in transformer) Indoor unit-remote controller: DC 12V, Indoor unit-outdoor unit: DC 12V
18
Figures in parentheses include auxiliary heat.
* For 208 volt applications refer to Technical And Service Manual for ratings.

MMeeddiiuumm--ttoo--llaarrggeeccaappaacciittyyccoooolliinnggaannddhheeaattiinngg
ffoorrllaarrggeeaarreeaaccoommmmeerrcciiaallaapppplliiccaattiioonnss..
PPLL//PPLLHH
Mr.Slim®
CEILING MOUNTED CASSETTES
19

Intelligent Remote Controller
Highly advanced microprocessor technology
is one reason why Mitsubishi leads the air
comfort category. This ultra-thin microprocessor
remote controller with LCD display gives you a
variety of functions and options to keep room
comfort perfectly balanced. It lets you check Mr.
Slim’s operating conditions with
just a glance. In the rare case of
a malfunction the self-diagnostic
system even indicates specific
problems for easy repair.
• Computerized Dehumidification
• Operation Mode Setting (Heat, Auto, Cool/Dry)
• Temperature Setting (in units of two
degrees fahrenheit.)
• Self-Diagnostic Display
• Room Temperature Display
• Twenty-Four Hour On/Off Timer
• Fan Speed Indicator
• Auto/Swing Vane Operation
• Memory (for storing operation functions)
• Low Ambient Operation
• Whisper-Quiet Operation
• EMS Gateway Available To Management System
Via RS-232 Cable
Outdoor Compressor Unit
Mr. Slim outdoor compressor units are
extremely efficient and reliable and true space-
savers.
These models can be installed up to 164
feet away from the indoor unit. They connect
simply through a single three inch opening in
the wall or ceiling. No ductwork or remodeling is
necessary. As many as ten units can be
installed in a row for major space savings.
Outdoor units are designed with a front-
access service panel that provides easy access
to all maintenance points.
These units operate in outdoor
temperatures as low as zero degrees
fahrenheit. when the optional wind
baffle is installed. You can,
therefore, cool spaces such as
computer rooms year round.
Mr. Slim heat pumps also feature automatic
cooling/heating changeover for simple control
and lower maintenance. You never have to
readjust the unit.
Air Flow
These ceiling cassettes offer multi-
directional air flow in a number of various
patterns to direct heat or cool air where you
need it most. You can use two, three, or four
vents and even set the vents for a narrow or
wide breeze, depending on whether you prefer
a strong, directed stream of air or a gentle
breeze over a wide area.Air outlet vanes inside
the vents automatically swing up and down for
uniform air distribution.
Redi-Charged System
Mr. Slim “P” Series features the industry’s
first redi-charged refrigerant system. There is
no need to adjust the amount of refrigerant to
match the piping length on-site unless lines
exceed 100 feet. You’ll see a major reduction in
installation time and labor costs. Plus you can
always count on Mr. Slim’s reliability from day
one because they’re thoroughly charged and
tested at the factory. You know it’s going to
work.
Hot Start System
Mr. Slim heat pumps provide warmth right
from the beginning. At the start of heating and
after defrosting, a very low fan speed prevents
the unit from blowing cold air into the room.And
a microprocessor controlled booster heater
speeds the warming process.
LARGE AREA COOLING AND HEATING MADE SIMPLE.
- WAY AIR FLOW
FOUR PATTERNS
- WAY AIR FLOW
SIX PATTERNS (Except PL/PLH30 • 36 • 42FK)
2
3
- WAY AIR FLOW
ONE PATTERN
4
20

Slimmer Indoor Unit And Fresh
Air Intake
The unit is specially designed for neat and tidy
installation. With minimum on-site work, branch
ducting and outside air ducting can be installed.
Simplified Installation
Mr. Slim Ceiling Cassettes install as easily as
track lighting and make an extremely neat,
unobtrusive presentation. They require only a
minimum of wiring. Naturally they’re not only
efficient but whisper quiet, too. You’ll hardly hear
them running.
These models also feature a drain water lift-up
mechanism that saves space and makes drainage
pipe connection surprisingly simple.
Refrigerant lines may be connected to the
outdoor unit from the front, rear, or side or beneath
the base. This easy-access design lets you
arrange and install a number of units in a small
area.
Warranty
Mitsubishi is so confident of the reliability
of Mr. Slim®Systems that we offer a six year
warranty on the compressor and a one year
warranty on all other parts.
21
12 Inch 10 Inch
Branch Duct
Unit Height Drain Height Panel Height 1 Inch
Air Conditioners
PL12FK
PL12FK
Cooling capacity: 12,300 BTU/h
SEER: 10.4
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
PL18FK
Cooling capacity: 18,400 BTU/h
SEER: 10.2
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
PL24FK
Cooling capacity: 23,600 BTU/h
SEER: 10.0
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
PL30FK
PL30FK
Cooling capacity: 31,000 BTU/h
SEER: 10.4
Cassette Dimensions:
W: 52-3/4” D:32-1/4” H:10-1/8”
PL34FK
Cooling capacity: 32,400 BTU/h
SEER: 10.0
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”
PL42FK
Cooling capacity: 42,500 BTU/h
SEER: 10.0
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”
Heat Pumps
PLH18FK
PLH18FK
Cooling capacity: 17,300 BTU/h
SEER: 10.3
Heating capacity: 18,000 BTU/h
(24,500 w/ aux. booster heat)
HSPF: 7.0
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
PLH24FK
Cooling capacity: 23,100 BTU/h
SEER 10.3
Heating capacity: 25,000 BTU/h
(31,500 w/ aux. booster heat)
HSPF: 7.1
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
PLH30FK
PLH30FK
Cooling capacity: 30,000 BTU/h
SEER 10.0
Heating capacity: 33,000 BTU/h
(41,200 w/ aux. booster heat)
HSPF: 7.1
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”
PLH36FK
Cooling capacity: 35,400 BTU/h
SEER 10.4
Heating capacity: 38,000 BTU/h
(47,600 w/ aux. booster heat)
HSPF: 7.4
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”
PLH42FK
Cooling capacity: 42,000 BTU/h
SEER: 10.0
Heating capacity: 44,300 BTU/h
(53,900 w/ aux. booster heat)
HSPF: 7.3
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”

ITEM MODEL PL12FK PL18FK PL24FK PL30FK PL34FK PL42FK PLH18FK PLH24FK PLH30FK PLH36FK PLH42FK
Cooling *1 BTU/h 12,300 18,400 23,600 31,000 32,400 42,500 17,300 23,100 30,000 35,400 42,000
Capacity Heating *1 BTU/h — — — — — — 18,000(24,500) 25,000(31,500) 33.000 (41,200) 38,000 (47,600) 44.300 (53,900)
Heating *2 BTU/h — — — — — — 11,500 (18,000) 16,000(22,500) 20,800(29,000) 19,600 (29,200) 28,300 (37,900)
Power Cooling *1 kW 1.23 1.88 2.48 3.10 3.76 4.40 1.77 2.42 3.20 3.53 4.27
Consumption Heating *1 kW — — — — — — 1.6 (3.5) 2.48 (4.38) 2.97 (5.37) 3.40 (6.2) 4.38 (7.18)
Heating *2 kW — — — — — — 1.4 (3.3) 2.0 (3.9) 2.6 (5.0) 2.70 (5.5) 3.4 (6.2)
EER *1 10.0 9.8 9.5 10.0 9.6 9.7 9.8 9.5 9.4 10.0 9.8
SEER 10.4 10.2 10.0 10.4 10.0 10.0 10.3 10.3 10.0 10.4 10.0
HSPF — — — — — — 7.0 7.1 7.1 7.4 7.3
COP Heating *1 — — — — — — 3.3 3.0 3.3 3.3 3.0
Heating *2 — — — — — — 2.4 2.3 2.3 2.1 2.4
INDOOR UNIT PL12FK PL18FK PL24FK PL30FK PL34FK PL42FK PLH18FK PLH24FK PLH30FK PLH36FK PLH42FK
External Finish Galvanized sheets with gray heat insulation
Power Supply V, phase, Hz 115, 1, 60 230, 1, 60
Max. Fuze Size (time delay) A 15 15 15 15 15 15 20 20 25 25 25
Min. Ampacity 2.0 2.0 2.0 2.0 2.0 3.0 15 15 17 17 17
Fan Motor F.L.A. 0.75 0.85 1.1 1.0 + 1.0 1 .0 + 1 .0 1.2 + 1.2 0.55 0.6 0.5 + 0.5 0.5+0.5 0.6 + 0.6
Auxiliary Heater A (kW) — — — — — — 8.4 (1.9) 8.4 (1.9) 11.0 (2.4) 12.0 (2.8) 12.0 (2.8)
Airflow Hi-Lo Dry CFM 570-540 680-460 750-550 1,170-850 1,170-850 1,270-920 600-390 640-420 1,060-670 1,060-670 1,090-780
Wet CFM 420-400 650-440 660-480 1 ,090-790 1,090-790 1,200-870 540-350 580-380 950-600 950-600 980-700
Moisture Removal Pints/h 3.8 5.3 6.8 9.6 10.9 12.6 5.3 7.0 9.1 10.9 12.3
Sound Pressure Level Hi-Lo dB(A) 43-35 45-38 47-39 49-41 49-41 49-42 45-38 47-39 49-41 49-41 49-42
Cond. Drain Connection OD in. 1-1/4
Cassette W in. 32-1/4 32-1/4 32-1/4 52-3/4 52-3/4 52-3/4 32-1/4 32-1/4 52-3/4 52-3/4 52-3/4
Dimensions D in. 32-1/4 32-1/4 32-1/4 32-1/4 32-1/4 32-1/4 32-1/4 32-1/4 32-1/4 32-1/4 32-1/4
H in. 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8 10-1/8
Weight 60 64 64 99 99 101 66 66 104 104 104
External Finish Marble White
Decorative W in. 36-5/8 36-5/8 36-5/8 57-1/8 57-1/8 57-1/8 36-5/8 36-5/8 57-1/8 57-1/8 57-1/8
Indoor grille Dimensions D in. 36-5/8 36-5/8 36-5/8 36-5/8 36-5/8 36-5/8 36-5/8 . 36-5/8 36-5/8 36-5/8 36-5/8
H in. 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8
Weight 22 22 22 35 35 35 22 22 35 35 35
OUTDOOR UNIT PU12EK PU18EK PU24EK PU30EK PU36EK PU42EK PUH18EK PUH24EK PUH30EK PUH36EK PUH42EK
External Finish Munsell 5Y 7/1
Sound Pressure Level dB(A) 50 53 55 55 55 56 53 55 55 55 56
Power Supply V, phase, Hz 230,1, 60
Max. Fuze Size (time delay) A 15 20 20 30 30 40 20 20 30 30 40
Min. Ampacity 11 16 16 20 22 27 16 16 20 22 27
Fan Motor F.L.A. 0.65 0.75 0.65+0.65 0.65+0.65 0.75+0.75 0.8 + 0.8 0.75 0.65 + 0.65 0.75 + 0.75 0.75+0.75 0.8 + 0.8
Model (Type) RH167NAB RH247NAB NH33NBD NH41NAD NH47NAD NH569NXA RH247NAB NH33NBD NH41NAD NH47NAD NH569NXA
Compressor R.L.A. 8.9 12 11.5 14 17.5 20 12 11.5 14 17.5 20
L.R.A. 29 37 54 73 87 105 37 54 73 87 105
Crankcase Heater A(W) 0.12 (28) 0.12 (28) 0.17(39) 0.12 (28) 0.17(39)
Refrigerant Control Capillary Tube
Defrost method — — Reverse Cycle
W in. 34-1/4 34-1/4 34-1/4 34-1/4 38-3/16 38-3/16 34-1/4 34-1/4 38-3/16 38-3/16 38-3/16
Dimensions D in. 11-5/8 11-5/8 11-5/8 11-5/8 13-9/16 13-9/16 11-5/8 11-5/8 13-9/16 13-9/16 13-9/16
H in. 25-9/16 33-1/2 49-9/16 49-9/16 49-9/16 49-9/16 33-1/2 49-9/16 49-9/16 49-9/16 49-9/16
Weight lbs. 105 154 207 208 220 260 131 202 245 246 268
REMOTE CONTROLLER With indoor unit
Control Voltage (by built- in transformer) Indoor unit-remote controller: DC 12V, Indoor unit-outdoor unit: DC 12V
REFRIGERANT PIPING SIZE 3/8, 5/8 1/2, 3/4 3/8, 5/8 1/2, 3/4 1/2, 7/8
Figures in parentheses include auxiliary booster heat.
* For 208 volt applications refer to Technical And Service Manual for ratings.
22

Notes: For MS/MSH, MF, MSM
*1. Rating conditions (cooling)_____ Indoor: 80˚F DB, 67˚F WB Outdoor: 95˚F DB, 75˚F WB
(heating)_____ Indoor: 70˚F DB, 60˚F WB Outdoor: 47˚F DB, 43˚F WB
*2. Include auxiliary electric heater operations at 115V. (MSH09EW, MSH12EN, MSH15EN)
*3. Rated voltage of compressor and fan motor is 115V. (MUM18EW)
*4. Values are for each indoor unit.
*5. Depth of outdoor unit ( ) includes thickness of fan grille.
Operating Range
Notes: For PK/PKH, PC/PCH, PL/PLH
* 1. Rating conditions (cooling)_____ Indoor: 80˚F DB, 67˚F WB Outdoor: 95˚F DB, 75˚F WB
(heating)_____ Indoor: 70˚F DB, 60˚F WB Outdoor: 47˚F DB, 43˚F WB
* 2. Rating conditions (heating)_____ Indoor: 70˚F DB, 60˚F WB Outdoor: 17˚F DB, 15˚F WB
* 3. Heating capacity and power consumption in [ ] include auxiliary electric heater operation at 208/230V.
Operating Range
*5 With Wind Baffle installed.
General Specifications
MODEL
MS09EW, MSH09EW, MSM18EW
MF12EN, MF15EN
MSM30EN
(MS09EWX2•MS15ENX1)
MS12EN, MS15EN, MSH12EN, MSH15EN
PK18EK, PKH18EK, PL18FK, PLH18FK,
PK12EK, PL12FK
PK24EK, PKH24EK, PC24EK, PCH24FK,
PL24FK, PK24EK
PK30EK, PKH30EK, PL30FK, PLH30FK,
PC30EK, PCH30EK, PL36FK, PLH36FK,
PC36EK, PCH36EK, PL42FK2, PC42EK
PLH42FK, PCH42EK
MS09EW
MS15EN
Max. Height
Difference (ft)
25
25
25
130
164
Max. Tubing
Length (ft)
49
65
49
130
164
Liquid
1/4
3/8
1/2
Gas
3/8
1/2
3/8
5/8
5/8
3/4
7/8
Connection
Method
Flared
Refrigerant Tubing
Tubing (OD)/N
MODEL
Cooling
Heating
Maximum
Minimum
Maximum
Minimum
Indoor air intake temperature
95˚F DB, 71˚F WB
67˚F DB, 57˚F WB
80˚F DB, 67˚F WB
70˚F DB, 60˚F WB
Outdoor air intake temperature
115˚F DB
*5 0˚F DB
75˚F DB, 65˚F WB
17˚F DB, 15˚F WB
MODEL
Cooling
Heating
Maximum
Minimum
Maximum
Minimum
Indoor air intake temperature
95˚F DB, 71˚F WB
67˚F DB, 57˚F WB
80˚F DB, 67˚F WB
70˚F DB, 60˚F WB
Outdoor air intake temperature
115˚F DB
67˚F DB
75˚F DB, 65˚F WB
17˚F DB, 15˚F WB
REFRIGERANT TUBING SIZE
*For more details refer to Technical And Service Manual . All specifications are subject to change without notice.
Form No. MIT-MRS-24-97
3100 AVALON RIDGE PL. STE. 200, NORCROSS, GA 30071
CALL: 770-613-5840 OR 800-433-4822 (PRESS 3) FAX: [phone]
MITSUBISHI ELECTRONICS AMERICA, INC.
HVAC DIVISION