Mitsubishi Electric PLFY-P VFM-E1 User manual

OPERATION MANUAL
For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.
BEDIENUNGSHANDBUCH
Zum sicheren und einwandfreien Gebrauch der Klimaanlage dieses Bedienungshandbuch vor Inbetriebnahme
gründlich durchlesen.
MANUEL D’UTILISATION
Pour une utilisation correcte sans risques, veuillez lire le manuel d’utilisation en entier avant de vous servir du
climatiseur.
BEDIENINGSHANDLEIDING
Voor een veilig en juist gebruik moet u deze bedieningshandleiding grondig doorlezen voordat u de
airconditioner gebruikt.
ISTRUZIONI DI FUNZIONAMENTO
Leggere attentamente questi istruzioni di funzionamento prima di avviare l’unità, per un uso corretto e sicuro
della stessa.
MANUAL DE INSTRUCCIONES
Lea este manual de instrucciones hasta el final antes de poner en marcha la unidad de aire acondicionado
para garantizar un uso seguro y correcto.
MANUAL DE OPERAÇÃO
Para segurança e utilização correctas, leia atentamente o manual de operação antes de pôr a funcionar a uni-
dade de ar condicionado.
DRIFTSMANUAL
Läs denna driftsmanual noga för säkert och korrekt bruk innan luftkonditioneringen används.
FOR USER
PARA O UTILIZADOR
FÖR ANVÄNDAREN
PARA EL USUARIO
PER L’UTENTE
VOOR DE GEBRUIKER
POUR L’UTILISATEUR
FÜR BENUTZER
ǼīȋǼǿȇǿǻǿȅ ȅǻǾīǿȍȃ ȋȇǾȈǼȍȈ
īȚĮ ĮıijȐȜİȚĮ țĮȚ ıȦıIJȒ ȤȡȒıȘ, ʌĮȡĮțĮȜİȓıIJİ įȚĮȕȐıİIJİ ʌȡȠıİȤIJȚțȐ ĮȣIJȩ IJȠ İȖȤİȚȡȓįȚȠ ȤȡȒıİȦȢ ʌȡȚȞ șȑıİIJİ
ıİ ȜİȚIJȠȣȡȖȓĮ IJȘ ȝȠȞȐįĮ țȜȚȝĮIJȚıȝȠȪ.
īǿǹ ȉȅȃ ȋȇǾȈȉǾ
IùLETME ELKITABI
(mniyetli ve do÷ru biçimde nasÕl kullanÕlaca÷ÕnÕö÷renmek için lütfen klima cihazÕnÕiúletmeden önce bu
elkitabÕnÕdikkatle okuyunuz.
KULLANICI øÇøN
English (GB)
Deutsch (D)
Français (F)
Nederlands (NL)
Español (E)
Italiano (I)
ǼȜȜȘȞȚțȐ (GR)
Português (P)
Türkçe (TR)
Air-Conditioners For Building Application
INDOOR UNIT
PLFY-PVFM-E1
ɊɍɄɈȼɈȾɋɌȼɈ ɉɈ ɗɄɋɉɅɍȺɌȺɐɂɂ
Ⱦɥɹ ɨɛɟɫɩɟɱɟɧɢɹ ɩɪɚɜɢɥɶɧɨɝɨ ɢɛɟɡɨɩɚɫɧɨɝɨ ɢɫɩɨɥɶɡɨɜɚɧɢɹ ɫɥɟɞɭɟɬ ɨɡɧɚɤɨɦɢɬɶɫɹ ɫɢɧɫɬɪɭɤɰɢɹɦɢ, ɭɤɚɡɚɧɧɵɦɢ ɜ
ɞɚɧɧɨɦ ɪɭɤɨɜɨɞɫɬɜɟ ɩɨ ɷɤɫɩɥɭɚɬɚɰɢɢ, ɬɳɚɬɟɥɶɧɵɦ ɨɛɪɚɡɨɦ ɞɨ ɬɨɝɨ, ɤɚɤ ɩɪɢɫɬɭɩɚɬɶ ɤɢɫɩɨɥɶɡɨɜɚɧɢɸ ɤɨɧɞɢɰɢɨɧɟɪɚ.
ȾɅə ɉɈɅɖɁɈȼȺɌȿɅə
Ɋɭɫɫɤɢɣ (RU)
Svenska (SV)
DRIFTSMANUAL
Læs venligst denne driftsmanual grundigt før airconditionanlægget betjenes af hensyn til sikker og korrekt brug. Dansk
(DA)
TIL BRUGER
BRUKSANVISNING
Vennligst les nøye gjennom denne bruksanvisningen, for sikkert og riktig bruk av klimaanlegget.
INSTRUKC-A OBSàUGI
$by zapewniübezpieczne i prawidáowe korzystanie z urządzenia, naleĪy wczeĞniej uwaĪnie przeczytaüniniejszą
instrukcjĊobsáugi.
Norsk (NO)
Polski (PL)
FOR BRUKER
INFORMAC-A DLA UĩYTKO:NIKA
Библиотека СОК 

2
GB
Contents
1. Safety Precautions .................................................................2
2. Parts Names...........................................................................3
3. Operation................................................................................6
4. Timer.....................................................................................13
5. Emergency Operation for Wireless Remote-controller.........14
6. Care and Cleaning................................................................14
7. Troubleshooting....................................................................16
8. Specifications .......................................................................17
1. Safety Precautions
Before installing the unit, make sure you read all the
“Safety Precautions”.
The “Safety Precautions” provide very important
points regarding safety. Make sure you follow them.
Please report to or take consent by the supply
authority before connection to the system.
long time, water condensed in the air conditioner may drop and
wet or damage furniture, etc.
Do not touch the upper air outlet vane or the lower air outlet
damper during operation. Otherwise, condensation may form and
the unit may stop operating.
Disposing of the unit
When you need to dispose of the unit, consult your dealer.
Caution:
Do not use any sharp obMect to push the buttons, as this may
damage the remote controller.
 Never block or cover the indoor or outdoor unit’s air inlets or outlets .
Never wipe the remote controller with ben]ene, thinner chemical
rags, etc.
Do not operate the unit for a long time in high humidity, e.g.
leaving a door or window open. In the cool mode, if the unit is
operated in a room with high humidity (80% RH or more) for a
Young children must be supervised to ensure that they do not
play with the air conditioner.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the ha]ards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
:hen installing or relocating, or servicing the air conditioner, use
only the specified refrigerant (R410A) to charge the refrigerant
lines. Do not mix it with any other refrigerant and do not allow air
to remain in the lines.
If air is mixed with the refrigerant, then it can be the cause of
abnormal high pressure in the refrigerant line, and may result in
an explosion and other ha]ards. The use of any refrigerant other
than that specified for the system will cause mechanical failure
or system malfunction or unit breakdown. In the worst case, this
could lead to a serious impediment to securing product safety.
:arning:
These appliances are not accessible to the general public.
The unit must not be installed by the user. Ask the dealer or an
authori]ed company to install the unit. If the unit is installed
improperly, water leakage, electric shock or fire may result.
Do not stand on, or place any items on the unit.
Do not splash water over the unit and do not touch the unit with
wet hands. An electric shock may result.
Do not spray combustible gas close to the unit. Fire may result.
Do not place a gas heater or any other open-flame appliance
where it will be exposed to the air discharged from the unit.
Incomplete combustion may result.
Do not remove the front panel or the fan guard from the outdoor
unit when it is running.
Never repair the unit or transfer it to another site by yourself.
:hen you notice exceptionally abnormal noise or vibration, stop
operation, turn off the power switch, and contact your dealer.
Never insert fingers, sticks etc. into the air inlets or outlets.
If you detect odd smells, stop using the unit, turn off the power
switch and consult your dealer. Otherwise, a breakdown, electric
shock or fire may result.
This air conditioner is NOT intended for use by children or infirm
persons without supervision.
If the refrigeration gas blows out or leaks, stop the operation of
the air conditioner, thoroughly ventilate the room, and contact
your dealer.
This appliance is intended to be used by expert or trained users
in shops, in light industry and on farms, or for commercial use by
lay persons.
Symbols used in the text
:arning:
Describes precautions that should be observed to prevent danger
of inMury or death to the user.
Caution:
Describes precautions that should be observed to prevent damage
to the unit.
Symbols used in the illustrations
: Indicates a part which must be grounded.
Note:
The phrase “:ired remote controller” in this operation manual refers to the PAR-2MAA.
If you need any information for the other remote controller, please refer to the instruction book included in this box.


GB
2. Parts Names
ŶIndoor Unit
PLFY-P·VFM-E1
Fan speed 3 speed + Auto
Vane Steps 5 steps
Auto Swing
Louver ʊ
Filter Long-life
Filter cleaning indication 2,500 hr
Enter the model setting number for
the indoor unit you want to operate. 066 (002)
ŶPLFY-P·VFM-E1
4-way Ceiling Cassette
Filter
Air intake
Vane
Air outlet
* For systems that are capable of simultaneous cooling and heating operation, use
the setting indicated in parentheses ( ). For details on the setting procedure, refer
to the Installation Manual.
Ŷ:ired Remote Controller
Function buttons
432 1
5
6
789 0
The functions of the function buttons change depending on the
screen.
Refer to the button function guide that appears at the bottom of the
LCD for the functions they serve on a given screen.
:hen the system is centrally controlled, the button function guide
that corresponds to the locked button will not appear.
Fri
Room
Set temp.
Mode Temp. Fan
Cool Auto
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display Main menu
Function guide
ű1[ON/OFF] button
Press to turn ON/OFF the indoor unit.
ű2[SELECT] button
Press to save the setting.
ű3[RETURN] button
Press to return to the previous screen.
ű4[MENU] button
Press to bring up the Main menu.
ű5Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button turns the backlight on
and it will stay lit for a certain period of time depending on the screen.
When the backlight is off, pressing any button turns the backlight on
and does not perform its function. (except for the [ON/OFF] button)
ű6ON/OFF lamp
This lamp lights up in green while the unit is in operation. It blinks while
the remote controller is starting up or when there is an error.
ű7Function button [F1]
Main display: Press to change the operation mode.
Main menu: Press to move the cursor down.
ű8Function button [F2]
Main display: Press to decrease temperature.
Main menu: Press to move the cursor up.
ű9Function button [F]
Main display: Press to increase temperature.
Main menu: Press to go to the previous page.
ű0Function button [F4]
Main display: Press to change the fan speed.
Main menu: Press to go to the next page.
Controller interface
78907890

4
GB
Fri
Mode Temp. Fan
Room
Cool Set temp.
2. Parts Names
The main display can be displayed in two different modes: “Full” and “Basic”. The factory setting is “Full”. To switch to the “Basic” mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
ű1Operation mode
Indoor unit operation mode appears here.
ű2Preset temperature
Preset temperature appears here.
ű3Clock (See the Installation Manual.)
Current time appears here.
ű4Fan speed
Fan speed setting appears here.
ű5Button function guide
Functions of the corresponding buttons appear here.
ű6
Appears when the ON/OFF operation is centrally controlled.
ű7
Appears when the operation mode is centrally controlled.
ű8
Appears when the preset temperature is centrally controlled.
ű9
Appears when the filter reset function is centrally controlled.
ű0
Indicates when filter needs maintenance.
ű1Room temperature (See the Installation Manual.)
Current room temperature appears here.
ű2
Appears when the buttons are locked.
<Full mode>
* All icons are displayed for explanation.
<Basic mode>
Fri
Cool
Mode Temp. Fan
AutoSet temp.
2
1
5
6
7
8
90
1
3
)
4
!
7
@
2345 6 8 2
1
5
ű3
Appears when the On/Off timer, Night setback, or Auto-off timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
ű4
Appears when the Weekly timer is enabled.
ű5
Appears while the units are operated in the energy-save mode. (Will
not appear on some models of indoor units)
ű6
Appears while the outdoor units are operated in the silent mode.
(This indication is not available for CITY MULTI models.)
ű7
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature (1).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
ű8
Appears when the units are operated in the energy-save mode with 3D
i-see Sensor.
ű9
Indicates the vane setting.
ű)
Indicates the louver setting.
ű!
Indicates the ventilation setting.
ű@
Appears when the preset temperature range is restricted.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
Display
4
3
9

5
GB
2. Parts Names
:ireless Remote-Controller (Optional parts)
Temperature setting
The units of temperature can be changed. For
details, refer to the Installation manual.
Not available
Appears when a non-supported func-
tion is selected.
Battery replacement indicator
Appears when the remaining battery
power is low.
Vane setting
Step 1 Step 2 Step 3 Step 4 Step 5 Swing Auto
Fan speed setting
Set Temperature buttons
Set Time button (Sets the time)
AirÀow button (Changes up/down airÀow direction)
Mode button (Changes operation mode)
Timer ON button
Timer OFF button
OFF/ON button
Fan Speed button (Changes fan speed)
SET/SEND button
CANCEL button
Up/Down buttons
Menu button
i-see button
Reset button
Remote controller display
Battery replacement indicator
Transmission area
Not available
Weekly timer ON/OFF button
(not available)
D i-see sensor (Air distribution)
Default Direct Indirect When Direct or Indirect
is selected, the vane
setting is set to “Auto”.
Operation mode
Cool Dry
Fan
Auto
(single set
point)
Heat
Auto*
(dual set
point)
* The initial setting is necessary.
Refer to Installation manual.

6
GB
ŶAbout the operation method, refer to the operation manual that comes with each remote controller.
.1. Turning ON/OFF
[ON] [OFF]
Press the [ON/OFF] button.
The ON/OFF lamp will light up in
green, and the operation will start.
Press the [ON/OFF] button again.
The ON/OFF lamp will come off,
and the operation will stop.
ŶOperation status memory
Remote controller setting
Operation mode Operation mode before the power was turned off
Preset temperature Preset temperature before the power was turned off
Fan speed Fan speed before the power was turned off
ŶSettable preset temperature range
Operation mode Preset temperature range
Cool/Dry 19 – 30 ºC
Heat 17 – 28 ºC
Auto (Single set point) 19 – 28 ºC
Auto (Dual set points) [Cool] Preset temperature range for the Cool mode
[Heat] Preset temperature range for the Heat mode
Fan/Ventilation Not settable
Note:
Even if you press the ON/OFF button immediately after shutting down the operation is progress, the air conditioner will not start for about minutes.
This is to prevent the internal components from being damaged.
The settable temperature range varies with the model of outdoor units and remote controller.
Notes (Only for wireless remote controller):
When using the wireless remote controller, point it towards the receiver on the indoor unit.
If the remote controller is operated within approximately 2 minutes after power is supplied to
the indoor unit, the indoor unit may beep twice as the unit is performing the initial automatic
check.
The indoor unit beeps to confirm that the signal transmitted from the remote controller has
been received. Signals can be received up to approximately 7 meters in a direct line from the
indoor unit in an area 45° to the left and right of the unit. However, illumination such as fluores-
cent lights and strong light can affect the ability of the indoor unit to receive signals.
If the operation lamp near the receiver on the indoor unit is blinking, the unit needs to be in-
spected. Consult your dealer for service.
Handle the remote controller carefully! Do not drop the remote controller or subject it to strong
shocks. In addition, do not get the remote controller wet or leave it in a location with high hu-
midity.
To avoid misplacing the remote controller, install the holder included with the remote controller
on a wall and be sure to always place the remote controller in the holder after use.
If the indoor unit beeps 4 times when you are using the wireless remote controller, switch the
auto mode setting to the AUTO (single set point) mode or AUTO (dual set point) mode.
For details, refer to the included Notice (A5 sheet) or the Installation Manual.
2. Parts Names
. Operation
Battery installation/replacement
1. Remove the top cover, insert two LR6 AA
batteries, and then install the top cover.
2. Press the Reset button.
1
2
3
Press the Reset button with an
object that has a narrow end.
Top cover
Two LR6 AA batteries
Insert the negative (–) end of
each battery first. Install the
batteries in the correct directions
(+, –)!

7
GB
. Operation
.2. Mode Selection Press the [F1] button to go through the op-
eration modes in the order of “Cool”, “Dry”,
“Fan”, “Auto”, and “Heat”. Select the desired
operation mode.
Cool Dry Fan
Auto Heat
Operation modes that are not available
to the connected outdoor unit models will
not appear on the display.
:hat the blinking mode icon means
The mode icon will blink when other indoor units in the same refrigerant
system (connected to the same outdoor unit) are already operated in a
different mode. In this case, the rest of the unit in the same group can
only be operated in the same mode.
.. Temperature setting
<Cool, Dry, Heat, and Auto (single set point)>
F1 F2 F3 F4
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
Press the [F2] button to decrease the preset temperature, and press the
[F3] button to increase.
Refer to the table on page 6 for the settable temperature range for dif-
ferent operation modes.
Preset temperature range cannot be set for Fan/Ventilation operation.
Preset temperature will be displayed either in Centigrade in 0.5- or
1-degree increments, or in Fahrenheit, depending on the indoor unit
model and the display mode setting on the remote controller.
Automatic operation (single set point)
ŶAccording to a set temperature, cooling operation starts if the room
temperature is too hot and heating operation starts if the room
temperature is too cold.
ŶDuring automatic operation, if the room temperature changes and
remains 1.5 °C or more above the set temperature for 3 minutes, the
air conditioner switches to cool mode. In the same way, if the room
temperature remains 1.5 °C or more below the set temperature for
3 minutes, the air conditioner switches to heat mode.
Cool mode 3 minutes (switches
from heating to cooling)
Set temperature +1.5°C
Set temperature
Set temperature -1.5°C
3 minutes (switches
from cooling to heating)
ŶBecause the room temperature is automatically adjusted in order to
maintain a fixed effective temperature, cooling operation is performed
a few degrees warmer and heating operation is performed a few
degrees cooler than the set room temperature once the temperature is
reached (automatic energy-saving operation).
<Auto (dual set point) mode>
Preset temperature
for cooling
Preset temperature
for heating
1 The current preset temperatures will appear. Press the [F2] or [F3]
button to display the Settings screen.
Preset temperature
for cooling
Preset temperature
for heating
2Press the [F1] or [F2] button to move the cursor to the desired
temperature setting (cooling or heating).
Press the [F3] button to decrease the selected temperature, and [F4]
to increase.
Refer to the table on page 6 for the settable temperature range for
different operation modes.
The preset temperature settings for cooling and heating in the
Auto (dual set point) mode are also used by the Cool/Dry and Heat
modes.
The preset temperatures for cooling and heating in the Auto (dual
set point) mode must meet the conditions below:
Preset cooling temperature is higher than preset heating temperature.
The minimum temperature difference requirement between cooling and
heating preset temperatures (varies with the models of indoor units
connected) is met.
* If preset temperatures are set in a way that does not meet the minimum
temperature difference requirement, both preset temperatures will
automatically be changed within the allowable setting ranges.
Navigating through the screens
To return to the Main screen ...... [RETURN] button
<Auto operation (dual set point) mode>
When the operation mode is set to the Auto (dual set point) mode, two
preset temperatures (one each for cooling and heating) can be set.
Depending on the room temperature, indoor unit will automatically
operate in either the Cool or Heat mode and keep the room temperature
within the preset range.
The graph below shows the operation pattern of indoor unit operated in
the Auto (dual set point) mode.
Operation pattern during Auto (dual set point) mode
HEAT COOL HEAT COOL
Preset temp.
(COOL)
Preset temp.
(HEAT)
Room
temperature
The room temperature
changes corresponding
to the change in the
outside temperature.
F1 F2 F3 F4
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
Cool
Room
28.5
AutoSet temp.
Mode Temp. Fan
Fri
28.5
Example display
(Centigrade in 0.5-degree increments)

8
GB
. Operation
.4. Fan speed setting
F1 F2 F3 F4
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
Press the [F4] button to go through the fan speeds in the following order.
Auto
The available fan speeds depend on the models of connected indoor
units.
Notes:
The number of available fan speeds depends on the type of unit
connected. Note also that some units do not provide an “Auto” setting.
In the following cases, the actual fan speed generated by the unit will differ
from the speed shown the remote controller display.
1. :hile the display is showing “STAND BY” or “DEFROST”.
2. :hen the temperature of the heat exchanger is low in the heat mode.
(e.g. immediately after heat operation starts)
. In HEAT mode, when room temperature is higher than the temperature
setting.
4. :hen the unit is in DRY mode.
.5. Airflow direction setting
.5.1 Navigating through the Main menu
<Accessing the Main menu>
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
<Item selection>
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Cursor
<Navigating through the pages>
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
page
<Exiting the Main menu screen>
F1 F2 F3 F4
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
<Display of unsupported functions>
F1 F2 F3 F4
Title
Not available
Unsupported function
Return:
.5.2 Vane·Vent. (Lossnay)
<Accessing the menu>
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Press the [MENU] button.
The Main menu will appear.
Press [F1] to move the cursor
down.
Press [F2] to move the cursor
up.
If no buttons are touched for
10 minutes, the screen will
automatically return to the Main
display. Any settings that have not
been saved will be lost.
Press the [RETURN] button to exit
the Main menu and return to the
Main display.
The message at left will appear if
the user selects a function not sup-
ported by the corresponding indoor
unit model.
Select “Vane·Louver·Vent. (Loss-
nay)” from the Main menu (refer to
page 8), and press the [SELECT]
button.
Press [F3] to go to the previous
page.
Press [F4] to go to the next
page.

9
GB
. Operation
<Vane setting>
F1 F2 F3 F4
Fri
Swing Off Off
LouverVent.Vane
<Vent. setting>
F1 F2 F3 F4
Fri
Low
Vent.
<Returning to the Main menu>
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Press the [F1] or [F2] button to go
through the vane setting options:
“Auto”, “Step 1”, “Step 2”, “Step 3”,
“Step 4”, “Step 5” and “Swing”.
Select the desired setting.
Auto
Auto
Swing
Step 1 Step 2
Step 4Step 3
Swing
Step 5
Select “Swing” to move the vanes
up and down automatically.
When set to “Step 1” through “Step
5”, the vane will be ¿xed at the se-
lected angle.
Press the [F3] button to go through
the ventilation setting options in the
order of “Off”, “Low”, and “High”.
* Settable only when LOSSNAY
unit is connected.
Off Low High
Off Low High
The fan on some models of in-
door units may be interlocked
with certain models of ventilation
units.
Press the [RETURN] button to go
back to the Main menu.
< How to set the ¿xed up/down air direction >
Notes:
ƔThis function cannot be set depending on the outdoor unit to be
connected.
For PLFY-PVFM-E series, only the particular outlet can be ¿xed to
certain direction with the procedures below. Once ¿xed, only the set
outlet is ¿xed every time air conditioner is turned on. (Other outlets
follow UP/DOWN air direction setting of remote controller.)
ŶExplanation of word
“Refrigerant address No.” and “Unit No.” are the numbers given to
each air conditioner.
“Outlet No.” is the number given to each outlet of air conditioner.
(Refer to the illustration below.)
“Up/Down air direction” is the direction (angle) to ¿x.
12345
Horizontal airflow
Downward
Remote controller setting
The airflow direction of this
outlet is controlled by the airflow
direction setting of remote
controller.
Fixed
The airflow direction of this outlet is fixed
in particular direction.
* When it is cold because of direct
airflow, the airflow direction can be
fixed horizontally to avoid direct airflow.
Outlet No.4
Electric Component box
Outlet No.1
Outlet No.3 Outlet No.2
Note:
The outlet No. is indicated by the number of grooves on both
ends of each air outlet. Set the air direction while checking the
information shown on the remote controller display.
Air outlet identification marks
Reset
horizontal

10
GB
. Operation
ŶManual vane angle (:ired remote controller)
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Maintenance
Initial setting
Service
F1 F2 F3 F4
Maintenance menu
Main menu:
Cursor
Auto descending panel
Manual vane angle
3D i-See sensor
F1 F2 F3 F4
Manual vane angle
Input display:
Address Check
M-NET address
Identify unit Check button
1
F1 F2 F3 F4
Manual vane angle
Manual vane angle
Select:
Setting
Outlet Angle
Note:
Do not set the draft reduction in an environment with high humidity.
Otherwise, condensation may form and drip.
1Select “Maintenance” from the
Main menu (refer to page 8), and
press the [SELECT] button.
2Select “Manual vane angle” with
the [F1] or [F2] button, and press
the [SELECT] button.
3Select the “M-NET address” for
the units to whose vanes are to be
fixed, with the [F2] or [F3] button,
and press the [SELECT] button.
Press the [F4] button to confirm the
unit.
The vane of only the target indoor
unit is pointing downward.
4The current vane setting will
appear.
Select the desired outlets from
1 through 4 with the [F1] or [F2]
button.
Outlet: “1”, “2”, “3”, “4” and “1, 2, 3,
4, (all outlets)”
Press the [F3] or [F4] button to go
through the option in the order of
“No setting (reset)”, “Step 1”, “Step
2”, “Step 3”, “Step 4”, “Step 5” and
“Draft reduction*”.
Select the desired setting.
* Draft reduction
The airflow direction for this setting
is more horizontal than the airflow
direction for the “Step 1” setting in
order to reduce a drafty feeling.
The draft reduction can be set for
only 1 vane.
ŶVane setting
No setting Step 1 Step 2
Step 4Step 3
All
outlets
Draft
reduction*
Step 5
Press the [SELECT] button to save the settings.
A screen will appear that indicates the setting information is being trans-
mitted.
The setting changes will be made to the selected outlet.
The screen will automatically return to the one shown above (step 5)
when the transmission is completed.
Make the settings for other outlets, following the same procedures.
If all outlets are selected, will be displayed the next time
the unit goes into operation.
Navigating through the screens
To go back to the Main menu................ [MENU] button
To return to the previous screen .......... [RETURN] button
ŶCon¿rmation procedure
F1 F2 F3 F4
1
Manual vane angle
Input display:
Address Check
M-NET address
Identify unit Check button
F1 F2 F3 F4
Manual vane angle
Return:
M-NET address
Function setting for unit
with vane fully open.
F1 F2 F3 F4
Manual vane angle
Return:
No communication
Check Unit state.
Caution:
To prevent falls, maintain a stable footing when operating the unit.
1Select the “M-NET address” for
the units to whose vanes are to be
fixed, with the [F2] or [F3] button.
Press the [F4] button to con¿rm the
unit.
2After pressing the [F4] button, wait
approximately 15 seconds, and
then check the current state of the
air conditioner.
ĺThe vane is pointing downward.
ĺThis air conditioner is displayed
on the remote controller.
ĺAll outlets are closed. ĺPress
the [RETURN] button and continue
the operation from the beginning.
ĺThe messages shown to the left
are displayed. ĺThe target device
does not exist at this refrigerant
address.
Press the [RETURN] button to
return to the initial screen.
3Change the “M-NET address” to
the next number.
Refer to step 1to change the
“M-NET address” and continue
with the confirmation.

11
GB
. Operation
.6. D i-See sensor setting
.6.1 D i-See sensor setting
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Maintenance
Initial setting
Service
1Select “Maintenance” from the
Main menu (refer to page 8), and
press the [SELECT] button.
ŶManual vane angle (:ireless remote controller)
Fig. -1
A
Fig. -2
B
Fig. -
1Going to the Manual vane setting
mode
Press the button.
(Start this operation from the
status of remote controller
display turned off.)
“FUNCTION” is lighted and “1”
blinks. (Fig. 3-1)
Press the button to select “2”,
and then press the button.
2Selecting the vane number (Fig.
3-2)
Press the buttons to select
the vane number A, and then
press the button.
3Setting the vane angle (Fig. 3-3)
Press the buttons to select
the vane angle B.
Point the wireless remote
controller toward the receiver on
the indoor unit, and then press
the button.
4Press the button to
complete the settings.
Display
Setting Step 1 Step 2 Step 3 Step 4
Display No display
Setting Step 5 No setting Draft reduction*
F1 F2 F3 F4
Maintenance menu
Main menu:
Cursor
Auto descending panel
Manual vane angle
3D i-See sensor
F1 F2 F3 F4
3D i-See sensor
Cursor
Setting display:
Air distribution
Energy saving option
Seasonal airflow
.6.2 Air distribution
F1 F2 F3 F4
Air distribution
Input display:
Address Check
M-NET address
Identify unit Check button
F1 F2 F3 F4
Air distribution
Select:
Cur.
M-NET address
Auto vane
Direct/Indirect setting
Direct/Indirect
Vane setting
Direct Indirect
Cooling horizontal ĺswing keep horizontal
Heating keep downward downward ĺhorizontal
2Select “3D i-See sensor” with the
[F1] or [F2] button, and press the
[SELECT] button.
3Select the desired menu with the
[F1] or [F2] button, and press the
[SELECT] button.
Air distribution
Select the airflow direction control
method when the airflow direction
is set to “Auto”.
Energy saving option
Operates the energy-save mode
according to whether persons are
detected in the room by the 3D
i-See sensor.
Seasonal airflow
When the thermostat turns off,
the fan and the vanes operate
according to the control settings.
1Select the M-NET address for the
units to whose vanes are to be
fixed, with the [F2] or [F3] button,
and press the [SELECT] button.
Press the [F4] button to confirm the
unit.
The vane of only the target indoor
unit is pointing downward.
2Select the menu with the [F4]
button.
Default ĺArea ĺDirect/Indirect
ĺDefault«
Default: The vanes move the same
as during normal operation.
During cooling mode, all of the
vanes move to the horizontal
airflow direction.
During heating mode, all of the
vanes move to the down airflow
direction.
Area: The vanes move to the
down airflow direction toward
areas with a high floor temperature
during cooling mode and toward
areas with a low floor temperature
during heating mode. Otherwise,
the vanes move to the horizontal
airflow direction.
Direct/Indirect: The vanes
automatically move relative to the
areas where persons are detected.
The vanes operate as indicated in
the following table.
* The draft reduction can be set for only 1 vane.
The setting is enabled only for the last vane that was set.

12
GB
3When Direct/Indirect is selected,
set each air outlet.
Select the air outlet with the [F1] or
[F2] button, and change the setting
with the [F4] button.
After changing the settings for all of
the air outlets, press the [SELECT]
button to save the settings.
* In order to enable this function,
the airflow direction must be set
to “Auto”.
F1 F2 F3 F4
Direct/Indirect setting
: Direct
: Indirect
: Indirect
: Direct
Select:
Outlet Angle
Ŷi-See button (:ireless remote controller)
1Each time is pressed during operation, the setting changes in
the following order: OFF ĺDirect ĺIndirect.
Display
Setting OFF Direct Indirect
When the setting is changed from OFF to Direct or Indirect, the vane
setting changes to “Auto”. This setting is applied collectively to all of the
vanes.
.6.Energy saving option
F1 F2 F3 F4
Energy saving option
Cursor
Setting display:
No occupancy energy save
Room occupancy energy save
No occupancy Auto-OFF
1Select the desired menu with the
[F1] or [F2] button.
No occupancy energy save
If there are no persons in the room
for 60 minutes or more, energy-
saving operation equal to 2 °C is
performed.
Room occupancy energy save
If the occupancy rate decreases
to approximately 30% of the
maximum occupancy rate, energy-
saving operation equal to 1 °C is
performed.
No occupancy Auto-OFF
If there are no persons in the
room for the set amount of time
(60–180 minutes), the operation
is automatically stopped.
. Operation
2When No occupancy energy save
or Room occupancy energy save
is selected
Select the setting with the [F4]
button.
OFF ĺCooling only ĺHeating
only ĺCooling/Heating ĺOFF«
After changing the setting, press
the [SELECT] button to save the
setting.
OFF: The function is disabled.
Cooling only: The function is
enabled only during cooling mode.
Heating only: The function is
enabled only during heating mode.
Cooling/Heating: The function is
enabled during both cooling mode
and heating mode.
3When No occupancy Auto-OFF is
selected
Set the time with the [F3] or [F4]
button.
ʊ: The setting is disabled
(the operation will not stop
automatically).
60 – 180: The time can be set in
10-minute increments.
4The message at left will appear
if the operation was stopped
automatically by the No occupancy
Auto-OFF setting.
F1 F2 F3 F4
Energy saving option
Select:
No occupancy energy save
Cooling/Heating
F1 F2 F3 F4
Energy saving option
Select:
Room occupancy energy save
Cooling/Heating
F1 F2 F3 F4
Energy saving option
Select:
Time
No occupancy Auto-OFF
120 min.
F1 F2 F3 F4
18:47 Thu
Shut down by
No Occupancy Auto-OFF
31/Dec AM12:59

1
GB
. Operation
Notes:
Any person at the following places cannot be detected.
ƔAlong the wall on which the air conditioner is installed
ƔDirectly under the air conditioner
Ɣ:here any obstacle, such as furniture, is between the person and
the air conditioner
A person may not be detected in the following situations.
ƔRoom temperature is high.
ƔA person wears heavy clothes and his/her skin is not exposed.
ƔA heating element of which temperature changes signi¿cantly is
present.
ƔSome heat sources, such as a small child or pet, may not be sensed.
ƔA heat source does not move for a long time.
The D i-See sensor operates once approximately every minutes
to measure the floor temperature and detect persons in the room.
ƔThe intermittent operating sound is a normal sound produced when
the D i-See sensor is moving.
.6.4 Seasonal airflow function
F1 F2 F3 F4
Seasonal airflow
Select:
Seasonal airflow
Cooling/Heating
1Select the setting with the [F4]
button.
OFF ĺCooling only ĺHeating
only ĺCooling/Heating ĺOFF«
After changing the setting, press
the [SELECT] button to save the
setting.
OFF: The function is disabled.
Cooling only: When the thermostat
turns off during cooling mode, the
vanes move up and down.
Heating only: When the thermostat
turns off during heating mode,
the vanes move to the horizontal
airflow direction to circulate the air.
Cooling/Heating: The function is
enabled during both cooling mode
and heating mode.
* In order to enable this function,
the airflow direction must be set
to “Auto”.
Notes:
ƔDuring swing operation, the directional indication on the screen
does not change in sync with the directional vanes on the unit.
ƔAvailable directions depend on the type of unit connected.
ƔIn the following cases, the actual air direction will differ from the
direction indicated on the remote controller display.
1. :hile the display is in “STAND BY” or “DEFROST” states.
2. Immediately after starting heat mode (while the system is wait-
ing for the mode change to take effect).
. In heat mode, when room temperature is higher than the tem-
perature setting.
.7. Ventilation
For LOSSNAY combination
ŶThe following 2 patterns of operation is available.
Run the ventilator together with indoor unit.
Run the ventilator independently.
Notes: (for wireless remote controller)
ƔRunning the ventilator independently is not available.
ƔNo indication on the remote controller.
4. Timer
ŶTimer functions are different by each remote controller.
ŶFor details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.

14
GB
:hen the remote controller cannot be used
When the batteries of the remote controller run out or the remote
controller malfunctions, the emergency operation can be done using the
emergency buttons on the grille.
ADEFROST/STAND BY lamp
BOperation lamp
CEmergency operation cooling switch
DEmergency operation heating switch
EReceiver
Starting operation
To operate the cooling mode, press the button Cfor more than 2
seconds.
To operate the heating mode, press the button Dfor more than 2
seconds.
Lighting of the Operation lamp Bmeans the start of operation.
Notes:
Details of emergency mode are as shown below.
Details of EMERGENCY MODE are as shown below.
Operation mode COOL HEAT
Set temperature 24°C 24°C
Fan speed High High
Airflow direction Horizontal Downward 4 (5)
Stopping operation
To stop operation, press the button Cor the button Dfor more
than 2 seconds.
E
B
A
D C
ŶPLFY-P·VFM-E1
5. Emergency Operation for :ireless Remote-controller
6. Care and Cleaning
ŶFilter information
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
F1 F2 F3 F4
Main menu:
Filter information
Reset
Please clean the filter.
Press Reset button after
filter cleaning.
will appear on the Main display
in the Full mode when it is time to
clean the ¿lters.
:ash, clean, or replace the ¿lters
when this sign appears.
Refer to the indoor unit Instruc-
tions Manual for details.
Select “Filter information” from the
Main menu (refer to page 8), and
press the [SELECT] button.
Press the [F4] button to reset ¿lter
sign.
Refer to the indoor unit Instructions
Manual for how to clean the ¿lter.
F1 F2 F3 F4
Filter information
Filter information
OK
Cancel
Reset filter sign?
Filter sign reset
Main menu:
Navigating through the screens
To go back to the Main menu................ [MENU] button
To return to the previous screen ........... [RETURN] button
Select “OK” with the [F4] button.
A con¿rmation screen will appear.

15
GB
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
If two or more indoor units are connected, filter cleaning timing for
each unit may be different, depending on the filter type.
The icon will appear when the filter on the main unit is due for
cleaning.
When the filter sign is reset, the cumulative operation time of all units
will be reset.
The icon is scheduled to appear after a certain duration of
operation, based on the premise that the indoor units are installed in a
space with ordinary air quality. Depending on the air quality, the filter
may require more frequent cleaning.
The cumulative time at which filter needs cleaning depends on the
model.
This indication is not available for wireless remote controller.
Caution:
Ask authori]ed people to clean the filter.
Cleaning the filters
Clean the filters using a vacuum cleaner. If you do not have a vacuum
cleaner, tap the filters against a solid object to knock off dirt and dust.
If the filters are especially dirty, wash them in lukewarm water. Take
care to rinse off any detergent thoroughly and allow the filters to dry
completely before putting them back into the unit.
Caution:
Do not dry the filters in direct sunlight or by using a heat source,
such as an electric heater: this may warp them.
Do not wash the filters in hot water (above 50C), as this may
warp them.
Make sure that the air filters are always installed. Operating the
unit without air filters can cause malfunction.
Caution:
Before you start cleaning, stop operation and turn OFF the power
supply.
Indoor units are eTuipped with filters to remove the dust of sucked-
in air. Clean the filters using the methods shown in the following
sketches.
Caution:
In removing the filter, precautions must be taken to protect your
eyes from dust. Also, if you have to climb up on a stool to do the
Mob, be careful not to fall.
:hen the filter is removed, do not touch the metallic parts inside
the indoor unit, otherwise inMury may result.
6. Care and Cleaning
When the is displayed on the
Main display in the Full mode, the
system is centrally controlled and
the ¿lter sign cannot be reset.
ŶPLFY-P·VFM-E1
1Slide the levers on the intake grille in the direction indicated by the
arrow and it should open.
2Open the intake grille.
3Release the knob on the center edge of the intake grille and pull
the filter forward to remove the filter.
AIntake grille levers
BGrille
CIntake grille
DFilter
AB
D
C
Cleaning the indoor unit
Wipe the outside of the unit with a clean, dry, soft cloth.
Clean off any oil stains or finger marks using a neutral household
detergent (such as dishwashing liquid or laundry detergent).
Caution:
Never use gasoline, ben]ene, thinner, scouring powder or any type
of non-neutral detergent, as these substances may damage the
unit’s case.

16
GB
7. Troubleshooting
Having trouble? Here is the solution. (Unit is operating normally.)
Air conditioner does not heat or cool well. ŶClean the filter. (Airflow is reduced when the filter is dirty or clogged.)
ŶCheck the temperature adjustment and adjust the set temperature.
ŶMake sure that there is plenty of space around the outdoor unit. Is the
indoor unit air inlet or outlet blocked?
ŶHas a door or window been left open?
When heating operation starts, warm air does not blow from the indoor
unit soon. ŶWarm air does not blow until the indoor unit has sufficiently warmed
up.
During heat mode, the air conditioner stops before the set room
temperature is reached. ŶWhen the outdoor temperature is low and the humidity is high,
frost may form on the outdoor unit. If this occurs, the outdoor unit
performs a defrosting operation. Normal operation should begin after
approximately 10 minutes.
Airflow up/down direction changes during operation or airflow up/down
direction cannot be set. ŶDuring cool mode, the vanes automatically move to the horizontal
(down) position after 1 hour when the down (horizontal) airflow up/
down direction is selected. This is to prevent water from forming and
dripping from the vanes.
ŶDuring heat mode, the vanes automatically move to the horizontal
airflow up/down direction when the airflow temperature is low or
during defrosting mode.
When the airflow up/down direction is changed, the vanes always move
up and down past the set position before finally stopping at the position. ŶWhen the airflow up/down direction is changed, the vanes move to the
set position after detecting the base position.
A flowing water sound or occasional hissing sound is heard. ŶThese sounds can be heard when refrigerant is flowing in the air
conditioner or when the refrigerant flow is changing.
A cracking or creaking sound is heard. ŶThese sounds can be heard when parts rub against each due to
expansion and contraction from temperature changes.
The room has an unpleasant odor. ŶThe indoor unit draws in air that contains gases produced from the
walls, carpeting, and furniture as well as odors trapped in clothing,
and then blows this air back into the room.
A white mist or vapor is emitted from the indoor unit. ŶIf the indoor temperature and the humidity are high, this condition may
occur when operation starts.
ŶDuring defrosting mode, cool airflow may blow down and appear like a
mist.
Water or vapor is emitted from the outdoor unit. ŶDuring cool mode, water may form and drip from the cool pipes and
joints.
ŶDuring heat mode, water may form and drip from the heat exchanger.
ŶDuring defrosting mode, water on the heat exchanger evaporates and
water vapor may be emitted.
The air conditioner does not operate even though the ON/OFF button
is pressed. The operation mode display on the remote controller
disappears.
ŶIs the power switch of the indoor unit turned off? Turn on the power
switch.
“ ” appears in the remote controller display. ŶDuring central control, “ ” appears in the remote controller display
and air conditioner operation cannot be started or stopped using the
remote controller.
When restarting the air conditioner soon after stopping it, it does not
operate even though the ON/OFF button is pressed. ŶWait approximately three minutes.
(Operation has stopped to protect the air conditioner.)
Air conditioner operates without the ON/OFF button being pressed. ŶIs the on timer set?
Press the ON/OFF button to stop operation.
ŶIs the air conditioner connected to a central remote controller?
Consult the concerned people who control the air conditioner.
ŶDoes “ ” appear in the remote controller display?
Consult the concerned people who control the air conditioner.
ŶHas the auto recovery feature from power failures been set?
Press the ON/OFF button to stop operation.
Air conditioner stops without the ON/OFF button being pressed. ŶIs the off timer set?
Press the ON/OFF button to restart operation.
ŶIs the air conditioner connected to a central remote controller?
Consult the concerned people who control the air conditioner.
ŶDoes “ ” appear in the remote controller display?
Consult the concerned people who control the air conditioner.
Remote controller timer operation cannot be set. ŶAre timer settings invalid?
If the timer can be set, or appears in the remote controller
display.
“PLEASE WAIT” appears in the remote controller display. ŶThe initial settings are being performed. Wait approximately 3 minutes.
An error code appears in the remote controller display. ŶThe protection devices have operated to protect the air conditioner.
ŶDo not attempt to repair this equipment by yourself.
Turn off the power switch immediately and consult your dealer. Be
sure to provide the dealer with the model name and information that
appeared in the remote controller display.
Draining water or motor rotation sound is heard. ŶWhen cooling operation stops, the drain pump operates and then
stops. Wait approximately 3 minutes.
(For PLFY-VFM)
The vanes do not move or the indoor unit does not respond to input from
the wireless remote controller.
ŶThe junction wire connectors of the vane motor and signal receiver
may not be connected correctly. Have an installer check the
connections. (The colors of the male and female sections of the
junction wire connectors must match.)

17
GB
7. Troubleshooting
Having trouble? Here is the solution. (Unit is operating normally.)
Noise is louder than specifications. ŶThe indoor operation sound level is affected by the acoustics of the
particular room as shown in the following table and will be higher than
the noise specification, which was measured in an echo-free room.
High sound-
absorbing rooms
Normal rooms Low sound-
absorbing rooms
Location
examples
Broadcasting
studio, music
room, etc.
Reception room,
hotel lobby, etc.
Office, hotel
room
Noise levels 3 to 7 dB 6 to 10 dB 9 to 13 dB
Nothing appears in the wireless remote controller display, the display
is faint, or signals are not received by the indoor unit unless the remote
controller is close.
ŶThe batteries are low.
Replace the batteries and press the Reset button.
ŶIf nothing appears even after the batteries are replaced, make sure
that the batteries are installed in the correct directions (+, –).
The operation lamp near the receiver for the wireless remote controller
on the indoor unit is flashing. ŶThe self diagnosis function has operated to protect the air conditioner.
ŶDo not attempt to repair this equipment by yourself.
Turn off the power switch immediately and consult your dealer. Be
sure to provide the dealer with the model name.
Warm air blows from the indoor unit intermittently when heat mode is off
or during fan mode. ŶWhen another indoor unit is operating in heat mode, the control
valve opens and closes occasionally to maintain stability in the air
conditioning system. This operation will stop after a while.
* If this will cause an undesirable rise in the room temperature in
small rooms, etc., stop the operation of the indoor unit temporarily.
The wireless remote controller does not operate (the indoor unit beeps
4 times). ŶSwitch the auto mode setting to the AUTO (single set point) mode or
AUTO (dual set point) mode. For details, refer to the included Notice
(A5 sheet) or the Installation Manual.
Range of application
The range of working temperatures for both the indoor and outdoor units of the series Y, R2, Multi-S is as below.
:arning:
If the air conditioner operates but does not cool or heat (depending on model) the room, consult your dealer since there may be a
refrigerant leak. Be sure to ask the service representative whether there is refrigerant leakage or not when repairs are carried out.
The refrigerant charged in the air conditioner is safe. Refrigerant normally does not leak, however, if refrigerant gas leaks indoors, and
comes into contact with the fire of a fan heater, space heater, stove, etc., harmful substances will be generated.
8. Specifications
Model PLFY-P15VFM-E1 PLFY-P20VFM-E1 PLFY-P25VFM-E1 PLFY-P32VFM-E1 PLFY-P40VFM-E1 PLFY-P50VFM-E1
Power source (Voltage/Frequency) <V/Hz> ~N/220-230-240/50, 220/60
Capacity (Cooling/Heating) <kW> 1.7/1.9 2.2/2.5 2.8/3.2 3.6/4.0 4.5/5.0 5.6/6.3
Dimension (Height) <mm> 245 (10)
Dimension (Width) <mm> 570 (625)
Dimension (Depth) <mm> 570 (625)
Net weight <kg> 14 (3) 15 (3)
Fan Airflow volume (Low-Middle-High) <m3/min> 6.5-7.5-8.0 6.5-7.5-8.5 6.5-8.0-9.0 7.0-8.0-9.5 7.5-9.0-11.0 9.0-11.0-13.0
Noise level (Low-Middle-High) <dB> 26-28-30 26-29-31 26-30-33 26-30-34 28-33-39 33-39-43
Notes
* Operation temperature of indoor unit.
Cooling mode: 15°C WB - 24°C WB
Heating mode: 15°C DB - 27°C DB
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling: Indoor 27 °C DB/19 °C WB, Outdoor 35 °C DB
Heating: Indoor 20 °C DB, Outdoor 7 °C DB/6 °C WB
*2 This figure ( ) indicates panel’s.

179
RU
ɋɨɞɟɪɠɚɧɢɟ
Ɇɟɪɵɩɪɟɞɨɫɬɨɪɨɠɧɨɫɬɢ
ɉɟɪɟɞɭɫɬɚɧɨɜɤɨɣɞɚɧɧɨɝɨɩɪɢɛɨɪɚɩɨɠɚɥɭɣɫɬɚ
ɨɛɹɡɚɬɟɥɶɧɨɩɪɨɱɢɬɚɣɬɟɜɫɟ³Ɇɟɪɵɩɪɟɞɨɫɬɨɪɨɠɧɨɫɬɢ´
 ȼɪɚɡɞɟɥɟ³Ɇɟɪɵɩɪɟɞɨɫɬɨɪɨɠɧɨɫɬɢ´ɢɡɥɨɠɟɧɵɨɱɟɧɶ
ɜɚɠɧɵɟɫɜɟɞɟɧɢɹɤɚɫɚɸɳɢɟɫɹɬɟɯɧɢɤɢɛɟɡɨɩɚɫɧɨɫɬɢ
Ɉɛɹɡɚɬɟɥɶɧɨɫɥɟɞɭɣɬɟɷɬɢɦɢɧɫɬɪɭɤɰɢɹɦ
 ɉɨɠɚɥɭɣɫɬɚɭɜɟɞɨɦɢɬɟɫɨɨɬɜɟɬɫɬɜɭɸɳɢɣɨɪɝɚɧ
ɷɥɟɤɬɪɨɫɧɚɛɠɟɧɢɹɢɥɢɩɨɥɭɱɢɬɟɨɬɧɟɝɨɪɚɡɪɟɲɟɧɢɟ
ɩɟɪɟɞɩɨɞɤɥɸɱɟɧɢɟɦɤɫɢɫɬɟɦɟɷɥɟɤɬɪɨɩɢɬɚɧɢɹ
ɨɬɧɜɥɚɠɧɨɫɬɢɢɥɢɜɵɲɟɜɨɡɦɨɠɧɨɤɚɩɚɧɢɟɜɥɚɝɢ
ɫɤɨɧɞɟɧɫɢɪɨɜɚɜɲɟɣɫɹɜɤɨɧɞɢɰɢɨɧɟɪɟɗɬɨɦɨɠɟɬɩɨɜɪɟɞɢɬɶ
ɦɟɛɟɥɶɢɬɞ

ɇɟɩɪɢɤɚɫɚɣɬɟɫɶɤɡɚɫɥɨɧɤɟɜɟɪɯɧɢɯɜɨɡɞɭɯɨɜɵɩɭɫɤɧɵɯ
ɨɬɜɟɪɫɬɢɣɢɥɢɞɟɦɩɮɟɪɭɧɢɠɧɢɯɜɨɡɞɭɯɨɜɵɩɭɫɤɧɵɯɨɬɜɟɪɫɬɢɣ
ɜɨɜɪɟɦɹɷɤɫɩɥɭɚɬɚɰɢɢȼɩɪɨɬɢɜɧɨɦɫɥɭɱɚɟɜɨɡɦɨɠɧɨ
ɨɛɪɚɡɨɜɚɧɢɟɤɨɧɞɟɧɫɚɬɚɢɩɪɟɤɪɚɳɟɧɢɟɪɚɛɨɬɵɩɪɢɛɨɪɚ
ɍɬɢɥɢɡɚɰɢɹɩɪɢɛɨɪɚ
Ʉɨɝɞɚɜɚɦɩɨɬɪɟɛɭɟɬɫɹɥɢɤɜɢɞɢɪɨɜɚɬɶɩɪɢɛɨɪɨɛɪɚɬɢɬɟɫɶɤɜɚɲɟɦɭ
ɞɢɥɟɪɭ
Ɉɫɬɨɪɨɠɧɨ
 ɇɟɩɨɥɶɡɭɣɬɟɫɶɨɫɬɪɵɦɢɩɪɟɞɦɟɬɚɦɢɞɥɹɧɚɠɚɬɢɹ
ɤɧɨɩɨɤɬɚɤɤɚɤɷɬɨɦɨɠɟɬɩɪɢɜɟɫɬɢɤɩɨɜɪɟɠɞɟɧɢɸɩɭɥɶɬɚ
ɞɢɫɬɚɧɰɢɨɧɧɨɝɨɭɩɪɚɜɥɟɧɢɹ
 ɇɟɡɚɤɪɵɜɚɣɬɟɢɧɟɛɥɨɤɢɪɭɣɬɟɜɯɨɞɧɵɟɢɜɵɩɭɫɤɧɵɟ
ɨɬɜɟɪɫɬɢɹɜɧɭɬɪɟɧɧɟɝɨɢɧɚɪɭɠɧɨɝɨɛɥɨɤɨɜ
 ɇɟɩɪɨɬɢɪɚɣɬɟɩɭɥɶɬɞɢɫɬɚɧɰɢɨɧɧɨɝɨɭɩɪɚɜɥɟɧɢɹɬɤɚɧɶɸ
ɫɦɨɱɟɧɧɨɣɛɟɧɡɢɧɨɦɯɢɦɢɱɟɫɤɢɦɪɚɫɬɜɨɪɢɬɟɥɟɦɢɬɞ
 Ɂɚɩɪɟɳɚɟɬɫɹɞɥɢɬɟɥɶɧɚɹɷɤɫɩɥɭɚɬɚɰɢɹɩɪɢɛɨɪɚɜɭɫɥɨɜɢɹɯ
ɜɵɫɨɤɨɣɜɥɚɠɧɨɫɬɢɧɚɩɪɢɦɟɪɜɩɨɦɟɳɟɧɢɢɫɨɬɤɪɵɬɵɦ
ɨɤɧɨɦɢɥɢɞɜɟɪɶɸȿɫɥɢɩɪɢɛɨɪɞɥɢɬɟɥɶɧɨɟɜɪɟɦɹɪɚɛɨɬɚɟɬ
ɜɪɟɠɢɦɟɨɯɥɚɠɞɟɧɢɹɜɩɨɦɟɳɟɧɢɢɫɜɵɫɨɤɨɣɜɥɚɠɧɨɫɬɶɸ
ɬɨɝɨɜɤɨɦɦɟɪɱɟɫɤɢɯɰɟɥɹɯɨɧɨɦɨɠɟɬɢɫɩɨɥɶɡɨɜɚɬɶɫɹ
ɧɟɫɩɟɰɢɚɥɢɫɬɚɦɢ
 ɇɟɨɛɯɨɞɢɦɨɧɚɛɥɸɞɚɬɶɡɚɦɚɥɟɧɶɤɢɦɢɞɟɬɶɦɢɫɬɟɦɱɬɨɛɵ
ɨɧɢɧɟɢɝɪɚɥɢɫɤɨɧɞɢɰɢɨɧɟɪɨɦɜɨɡɞɭɯɚ
 ɗɬɨɬɩɪɢɛɨɪɧɟɩɪɟɞɧɚɡɧɚɱɟɧɞɥɹɢɫɩɨɥɶɡɨɜɚɧɢɹɟɝɨɞɟɬɶɦɢ
ɢɧɜɚɥɢɞɚɦɢɚɬɚɤɠɟɥɢɰɚɦɢɫɧɟɞɨɫɬɚɬɨɱɧɵɦɨɩɵɬɨɦɢ
ɤɜɚɥɢɮɢɤɚɰɢɟɣɞɨɬɟɯɩɨɪɩɨɤɚɨɧɢɧɟɩɪɨɣɞɭɬɨɛɭɱɟɧɢɟ
ɢɧɟɩɨɥɭɱɚɬɩɨɥɧɵɣɢɧɫɬɪɭɤɬɚɠɩɨɩɪɚɜɢɥɚɦɛɟɡɨɩɚɫɧɨɣ
ɷɤɫɩɥɭɚɬɚɰɢɢɞɚɧɧɨɝɨɩɪɢɛɨɪɚɭɥɢɰɚɨɬɜɟɬɫɬɜɟɧɧɨɝɨɡɚɢɯ
ɛɟɡɨɩɚɫɧɨɫɬɶ
 Ⱦɚɧɧɵɦɭɫɬɪɨɣɫɬɜɨɦɦɨɝɭɬɩɨɥɶɡɨɜɚɬɶɫɹɞɟɬɢɫɬɚɪɲɟ
ɥɟɬɢɥɢɰɚɫɨɝɪɚɧɢɱɟɧɧɵɦɢɮɢɡɢɱɟɫɤɢɦɢɫɟɧɫɨɪɧɵɦɢɢɥɢ
ɭɦɫɬɜɟɧɧɵɦɢɜɨɡɦɨɠɧɨɫɬɹɦɢɢɥɢɧɟɞɨɫɬɚɬɨɱɧɵɦɨɩɵɬɨɦ
ɢɥɢɡɧɚɧɢɹɦɢɩɨɞɧɚɛɥɸɞɟɧɢɟɦɨɬɜɟɬɫɬɜɟɧɧɨɝɨɥɢɰɚɢɥɢ
ɩɨɫɥɟɨɛɭɱɟɧɢɹɩɨɥɶɡɨɜɚɧɢɸɭɫɬɪɨɣɫɬɜɨɦɫɪɚɡɴɹɫɧɟɧɢɟɦ
ɩɪɚɜɢɥɛɟɡɨɩɚɫɧɨɫɬɢɢɩɪɢɭɫɥɨɜɢɢɩɨɧɢɦɚɧɢɹɜɨɡɦɨɠɧɵɯ
ɨɩɚɫɧɨɫɬɟɣɩɪɢɟɝɨɩɪɢɦɟɧɟɧɢɢɇɟɩɨɡɜɨɥɹɣɬɟɞɟɬɹɦɢɝɪɚɬɶ
ɫɞɚɧɧɵɦɭɫɬɪɨɣɫɬɜɨɦɈɱɢɫɬɤɚɢɬɟɯɧɢɱɟɫɤɨɟɨɛɫɥɭɠɢɜɚɧɢɟ
ɭɫɬɪɨɣɫɬɜɚɧɟɞɨɥɠɧɵɨɫɭɳɟɫɬɜɥɹɬɶɫɹɞɟɬɶɦɢɛɟɡ
ɫɨɨɬɜɟɬɫɬɜɭɸɳɟɝɨɤɨɧɬɪɨɥɹ
 ɉɪɢɦɨɧɬɚɠɟɢɥɢɩɟɪɟɦɟɳɟɧɢɢɚɬɚɤɠɟɩɪɢɨɛɫɥɭɠɢɜɚɧɢɢ
ɤɨɧɞɢɰɢɨɧɟɪɚɢɫɩɨɥɶɡɭɣɬɟɬɨɥɶɤɨɭɤɚɡɚɧɧɵɣɯɥɚɞɚɝɟɧɬ
5$ɞɥɹɡɚɩɨɥɧɟɧɢɹɬɪɭɛɨɩɪɨɜɨɞɨɜɯɥɚɞɚɝɟɧɬɚɇɟ
ɫɦɟɲɢɜɚɣɬɟɟɝɨɧɢɫɤɚɤɢɦɞɪɭɝɢɦɯɥɚɞɚɝɟɧɬɨɦɢɧɟ
ɞɨɩɭɫɤɚɣɬɟɧɚɥɢɱɢɹɜɨɡɞɭɯɚɜɬɪɭɛɨɩɪɨɜɨɞɚɯ
ɇɚɥɢɱɢɟɜɨɡɞɭɯɚɜɬɪɭɛɨɩɪɨɜɨɞɚɯɦɨɠɟɬɜɵɡɵɜɚɬɶɫɤɚɱɤɢ
ɞɚɜɥɟɧɢɹɜɪɟɡɭɥɶɬɚɬɟɤɨɬɨɪɵɯɦɨɠɟɬɩɪɨɢɡɨɣɬɢɜɡɪɵɜɢɥɢ
ɞɪɭɝɢɟɩɨɜɪɟɠɞɟɧɢɹɂɫɩɨɥɶɡɨɜɚɧɢɟɥɸɛɨɝɨɯɥɚɞɚɝɟɧɬɚ
ɨɬɥɢɱɧɨɝɨɨɬɭɤɚɡɚɧɧɨɝɨɞɥɹɷɬɨɣɫɢɫɬɟɦɵɜɵɡɨɜɟɬ
ɦɟɯɚɧɢɱɟɫɤɨɟɩɨɜɪɟɠɞɟɧɢɟɫɛɨɢɜɪɚɛɨɬɟɫɢɫɬɟɦɵɢɥɢ
ɜɵɯɨɞɭɫɬɪɨɣɫɬɜɚɢɡɫɬɪɨɹȼɧɚɢɯɭɞɲɟɦɫɥɭɱɚɟɷɬɨɦɨɠɟɬ
ɩɨɫɥɭɠɢɬɶɫɟɪɶɟɡɧɨɣɩɪɟɝɪɚɞɨɣɤɨɛɟɫɩɟɱɟɧɢɸɛɟɡɨɩɚɫɧɨɣ
ɪɚɛɨɬɵɷɬɨɝɨɢɡɞɟɥɢɹ
ɉɪɟɞɭɩɪɟɠɞɟɧɢɟ
 Ɂɚɩɪɟɳɚɟɬɫɹɛɟɫɤɨɧɬɪɨɥɶɧɵɣɧɟɫɚɧɤɰɢɨɧɢɪɨɜɚɧɧɵɣɞɨɫɬɭɩ
ɩɨɫɬɨɪɨɧɧɢɯɥɢɰɤɩɪɢɛɨɪɚɦɷɬɨɝɨɤɥɚɫɫɚ

Ⱦɚɧɧɵɩɪɢɛɨɪɧɟɞɨɥɠɟɧɭɫɬɚɧɚɜɥɢɜɚɬɶɫɹɩɨɥɶɡɨɜɚɬɟɥɟɦ
Ɉɛɪɚɬɢɬɟɫɶɤɩɨɫɬɚɜɳɢɤɭɢɥɢɜɫɩɟɰɢɚɥɢɡɢɪɨɜɚɧɧɨɟ
ɩɪɟɞɩɪɢɹɬɢɟɢɡɚɤɚɠɢɬɟɭɫɬɚɧɨɜɤɭɩɪɢɛɨɪɚɉɪɢ
ɧɟɩɪɚɜɢɥɶɧɨɣɭɫɬɚɧɨɜɤɟɦɨɠɟɬɩɪɨɢɡɨɣɬɢɭɬɟɱɤɚɜɨɞɵ
ɷɥɟɤɬɪɢɱɟɫɤɢɣɲɨɤɢɥɢɩɨɠɚɪ
 ɇɢɤɨɝɞɚɧɟɡɚɧɢɦɚɣɬɟɫɶɪɟɦɨɧɬɨɦɢɥɢɩɟɪɟɧɨɫɨɦɩɪɢɛɨɪɚɧɟ
ɤɬɨɢɧɨɣɦɟɫɬɨɫɚɦɨɫɬɨɹɬɟɥɶɧɨ
 ɇɟɫɬɚɜɶɬɟɤɚɤɢɟɥɢɛɨɩɨɫɬɨɪɨɧɧɢɟɩɪɟɞɦɟɬɵɧɚɩɪɢɛɨɪ
 ɇɟɩɪɨɥɢɜɚɣɬɟɧɚɩɪɢɛɨɪɜɨɞɭɢɧɟɞɨɬɪɚɝɢɜɚɣɬɟɫɶɞɨ
ɩɪɢɛɨɪɚɦɨɤɪɵɦɢɪɭɤɚɦɢ
 ɇɟɪɚɡɛɪɵɡɝɢɜɚɣɬɟɜɛɥɢɡɢɨɬɩɪɢɛɨɪɚɝɨɪɸɱɢɣɝɚɡ
 ɇɟɫɧɢɦɚɣɬɟɩɟɪɟɞɧɸɸɩɚɧɟɥɶɢɥɢɡɚɳɢɬɭɜɟɧɬɢɥɹɬɨɪɚɫ
ɜɧɟɲɧɟɝɨɩɪɢɛɨɪɚɤɨɝɞɚɨɧɪɚɛɨɬɚɟɬ
 ɇɢɤɨɝɞɚɧɟɡɚɧɢɦɚɣɬɟɫɶɪɟɦɨɧɬɨɦɢɥɢɩɟɪɟɧɨɫɨɦɩɪɢɛɨɪɚɧɟ
ɤɬɨɢɧɨɣɦɟɫɬɨɫɚɦɨɫɬɨɹɬɟɥɶɧɨ

ȿɫɥɢɜɵɡɚɦɟɬɢɬɟɧɟɧɨɪɦɚɥɶɧɨɫɢɥɶɧɵɣɲɭɦɢɥɢɜɢɛɪɚɰɢɸ
ɨɫɬɚɧɨɜɢɬɟɩɪɢɛɨɪɨɬɤɥɸɱɢɬɟɝɥɚɜɧɵɣɜɵɤɥɸɱɚɬɟɥɶɩɢɬɚɧɢɹɢ
ɫɜɹɠɢɬɟɫɶɫɜɚɲɢɦɩɨɫɬɚɜɳɢɤɨɦ
 ɇɢɤɨɝɞɚɧɟɜɫɬɚɜɥɹɣɬɟɩɚɥɶɰɵɩɚɥɤɢɢɬɞɜɨɬɜɟɪɫɬɢɹ
ɜɯɨɞɚɢɥɢɜɵɯɨɞɚ
 ȿɫɥɢɜɵɩɨɱɭɜɫɬɜɭɟɬɟɫɬɪɚɧɧɵɟɡɚɩɚɯɢɨɫɬɚɧɨɜɢɬɟ
ɩɪɢɛɨɪɨɬɤɥɸɱɢɬɟɩɢɬɚɧɢɟɢɩɪɨɤɨɧɫɭɥɶɬɢɪɭɣɬɟɫɶɫɜɚɲɢɦ
ɩɨɫɬɚɜɳɢɤɨɦȼɩɪɨɬɢɜɧɨɦɫɥɭɱɚɟɦɨɠɟɬɩɪɨɢɡɨɣɬɢɩɨɥɨɦɤɚ
ɩɪɢɛɨɪɚɩɨɠɚɪɢɥɢɷɥɟɤɬɪɨɲɨɤ

ȾɟɬɹɦɢɧɟɦɨɳɧɵɦɥɸɞɹɦɁȺɉɊȿɓȺȿɌɋəɫɚɦɨɫɬɨɹɬɟɥɶɧɨ
ɩɨɥɶɡɨɜɚɬɶɫɹɞɚɧɧɵɦɤɨɧɞɢɰɢɨɧɟɪɨɦɜɨɡɞɭɯɚ
 ȿɫɥɢɩɪɨɢɫɯɨɞɢɬɜɵɛɪɨɫɢɥɢɭɬɟɱɤɚɝɚɡɚɯɥɚɞɚɝɟɧɬɚ
ɨɫɬɚɧɨɜɢɬɟɪɚɛɨɬɭɤɨɧɞɢɰɢɨɧɟɪɚɬɳɚɬɟɥɶɧɨɩɪɨɜɟɬɪɢɬɟ
ɩɨɦɟɳɟɧɢɟɢɫɜɹɠɢɬɟɫɶɫɜɚɲɢɦɩɨɫɬɚɜɳɢɤɨɦ
 Ⱦɚɧɧɨɟɢɡɞɟɥɢɟɩɪɟɞɧɚɡɧɚɱɟɧɨɞɥɹɷɤɫɩɥɭɚɬɚɰɢɢ
ɫɩɟɰɢɚɥɢɫɬɚɦɢɢɥɢɫɩɟɰɢɚɥɶɧɨɨɛɭɱɟɧɧɵɦɢɩɨɥɶɡɨɜɚɬɟɥɹɦɢ
ɜɦɚɝɚɡɢɧɚɯɜɥɟɝɤɨɣɩɪɨɦɵɲɥɟɧɧɨɫɬɢɢɧɚɮɟɪɦɚɯɤɪɨɦɟ
ɋɢɦɜɨɥɢɤɚɢɫɩɨɥɶɡɭɟɦɚɹɜɬɟɤɫɬɟ
ɉɪɟɞɭɩɪɟɠɞɟɧɢɟ
Ɉɩɢɫɵɜɚɟɬɦɟɪɵɩɪɟɞɨɫɬɨɪɨɠɧɨɫɬɢɤɨɬɨɪɵɟɫɥɟɞɭɟɬ
ɜɵɩɨɥɧɹɬɶɱɬɨɛɵɢɡɛɟɠɚɬɶɬɪɚɜɦɵɢɥɢɝɢɛɟɥɢɩɨɥɶɡɨɜɚɬɟɥɹ
Ɉɫɬɨɪɨɠɧɨ
Ɉɩɢɫɵɜɚɟɬɦɟɪɵɩɪɟɞɨɫɬɨɪɨɠɧɨɫɬɢɤɨɬɨɪɵɟɫɥɟɞɭɟɬ
ɜɵɩɨɥɧɹɬɶɱɬɨɛɵɧɟɩɨɜɪɟɞɢɬɶɩɪɢɛɨɪ
ɋɢɦɜɨɥɵɭɤɚɡɚɧɧɵɟɧɚɢɥɥɸɫɬɪɚɰɢɹɯ
ɍɤɚɡɵɜɚɟɬɱɬɨɷɬɚɱɚɫɬɶɞɨɥɠɧɚɛɵɬɶɡɚɡɟɦɥɟɧɚ
Ɇɟɪɵɩɪɟɞɨɫɬɨɪɨɠɧɨɫɬɢ179
ɇɚɢɦɟɧɨɜɚɧɢɟɞɟɬɚɥɟɣ180
ɗɤɫɩɥɭɚɬɚɰɢɹ183
Ɍɚɣɦɟɪ190

Ɋɚɛɨɬɚɩɭɥɶɬɚɞɢɫɬɚɧɰɢɨɧɧɨɝɨɭɩɪɚɜɥɟɧɢɹɜɚɜɚɪɢɣɧɨɦɪɟɠɢɦɟ 191
ɍɯɨɞɢɱɢɫɬɤɚ191
ɂɫɩɪɚɜɥɟɧɢɟɧɟɩɨɥɚɞɨɤ193
Ɍɟɯɧɢɱɟɫɤɢɟɯɚɪɚɤɬɟɪɢɫɬɢɤɢ194
ɉɪɢɦɟɱɚɧɢɟ
ȼɷɬɨɦɪɭɤɨɜɨɞɫɬɜɟɩɨɢɫɩɨɥɶɡɨɜɚɧɢɸɚɩɩɚɪɚɬɚɮɪɚɡɚ³ɩɪɨɜɨɞɧɨɣɩɭɥɶɬɞɢɫɬɚɧɰɢɨɧɧɨɝɨɭɩɪɚɜɥɟɧɢɹ´ɨɬɧɨɫɢɬɫɹɤɩɭɥɶɬɭ
ɞɢɫɬɚɧɰɢɨɧɧɨɝɨɭɩɪɚɜɥɟɧɢɹ3$50$$
ɋɜɟɞɟɧɢɹɨɞɪɭɝɢɯɩɭɥɶɬɚɯɞɢɫɬɚɧɰɢɨɧɧɨɝɨɭɩɪɚɜɥɟɧɢɹɩɪɢɜɨɞɹɬɫɹɜɪɭɤɨɜɨɞɫɬɜɟɧɚɯɨɞɹɳɟɦɫɹɜɷɬɨɣɤɨɪɨɛɤɟ

180
RU
ɇɚɢɦɟɧɨɜɚɧɢɟɞɟɬɚɥɟɣ
ȼɧɭɬɪɟɧɧɢɣɩɪɢɛɨɪ
PLFY-P·VFM-E1
ɋɤɨɪɨɫɬɢɪɚɛɨɬɵɜɟɧɬɢɥɹɬɨɪɚ ɋɤɨɪɨɫɬɶ
Ⱥɜɬɨ
Ʌɨɩɚɬɤɚ ɉɨɥɨɠɟɧɢɹ
ɮɢɤɫɢɪɨɜɚɧɧɵɯɩɨɥɨɠɟɧɢɣ
Ⱥɜɬɨɩɨɜɨɪɨɬ
ɀɚɥɸɡɢ ʊ
Ɏɢɥɶɬɪ Ⱦɨɥɝɨɜɟɱɧɵɣ
ɂɧɞɢɤɚɰɢɹɨɱɢɫɬɤɢɮɢɥɶɬɪɚ ɱɚɫɨɜ
ȼɜɟɞɢɬɟɧɨɦɟɪɧɚɫɬɪɨɣɤɢ
ɦɨɞɟɥɢɜɧɭɬɪɟɧɧɟɝɨɩɪɢɛɨɪɚ
ɤɨɬɨɪɵɣɜɵɯɨɬɢɬɟɢɫɩɨɥɶɡɨɜɚɬɶ

Ⱦɥɹɫɢɫɬɟɦɩɨɞɞɟɪɠɢɜɚɸɳɢɯɪɚɛɨɬɭɨɞɧɨɜɪɟɦɟɧɧɨɜɪɟɠɢɦɚɯɨɯɥɚɠɞɟɧɢɹɢ
ɨɛɨɝɪɟɜɚɢɫɩɨɥɶɡɭɣɬɟɧɚɫɬɪɨɣɤɭɭɤɚɡɚɧɧɭɸɜɫɤɨɛɤɚɯȻɨɥɟɟɩɨɞɪɨɛɧɭɸ
ɢɧɮɨɪɦɚɰɢɸɨɩɪɨɰɟɞɭɪɟɧɚɫɬɪɨɣɤɢɫɦɜɪɭɤɨɜɨɞɫɬɜɟɩɨɭɫɬɚɧɨɜɤɟ
3/)<3ā9)0(
 ɯɨɞɨɜɚɹɩɨɬɨɥɨɱɧɚɹɤɚɫɫɟɬɚ
Ɏɢɥɶɬɪ
ȼɩɭɫɤɜɨɡɞɭɯɚ
Ʌɨɩɚɬɤɚ
ȼɵɯɨɞɧɵɟ
ɜɨɡɞɭɲɧɵɟ
ɨɬɜɟɪɫɬɢɹ
Ɏɭɧɤɰɢɨɧɚɥɶɧɵɟɤɧɨɩɤɢ
432 1
5
6
789 0
Ŷɉɪɨɜɨɞɧɨɣɩɭɥɶɬɞɢɫɬɚɧɰɢɨɧɧɨɝɨɭɩɪɚɜɥɟɧɢɹ
Ɏɭɧɤɰɢɢɮɭɧɤɰɢɨɧɚɥɶɧɵɯ ɤɧɨɩɨɤɦɟɧɹɸɬɫɹɜ ɡɚɜɢɫɢɦɨɫɬɢɨɬ
ɷɤɪɚɧɚ
ɋɦɩɨɞɫɤɚɡɤɭɩɨɮɭɧɤɰɢɹɦɤɧɨɩɨɤɤɨɬɨɪɚɹɨɬɨɛɪɚɠɚɟɬɫɹɜɧɢɠ
ɧɟɣɱɚɫɬɢɀɄɷɤɪɚɧɚɞɥɹɮɭɧɤɰɢɣɤɨɬɨɪɵɟɪɚɛɨɬɚɸɬɜɞɚɧɧɨɦ
ɨɤɧɟ
ɉɪɢ ɰɟɧɬɪɚɥɢɡɨɜɚɧɧɨɦ ɭɩɪɚɜɥɟɧɢɢ ɫɢɫɬɟɦɨɣ ɩɨɞɫɤɚɡɤɚ ɩɨ
ɮɭɧɤɰɢɹɦɞɥɹɡɚɛɥɨɤɢɪɨɜɚɧɧɵɯɤɧɨɩɨɤɨɬɨɛɪɚɠɚɬɶɫɹɧɟɛɭɞɟɬ
ű1Ʉɧɨɩɤɚ>ȼɄɅȼɕɄɅ@
ɇɚɠɦɢɬɟɱɬɨɛɵɜɤɥɸɱɢɬɶɢɥɢɜɵɤɥɸɱɢɬɶɜɧɭɬɪɟɧɧɢɣɛɥɨɤ
ű2Ʉɧɨɩɤɚ>ȼɕȻɈɊ@
ɇɚɠɦɢɬɟɱɬɨɛɵɫɨɯɪɚɧɢɬɶɧɚɫɬɪɨɣɤɭ
ű3Ʉɧɨɩɤɚ>ȼɈɁȼɊȺɌ@
ɇɚɠɦɢɬɟɞɥɹɜɨɡɜɪɚɬɚɤɩɪɟɞɵɞɭɳɟɦɭɷɤɪɚɧɭ
ű4Ʉɧɨɩɤɚ>Ɇȿɇɘ@
ɇɚɠɦɢɬɟɱɬɨɛɵɨɬɤɪɵɬɶɝɥɚɜɧɨɟɦɟɧɸ
ű5ɉɨɞɫɜɟɬɤɚɀɄɷɤɪɚɧɚ
Ȼɭɞɭɬɨɬɨɛɪɚɠɟɧɵɩɚɪɚɦɟɬɪɵɪɚɛɨɬɵ
Ʉɨɝɞɚɩɨɞɫɜɟɬɤɚɜɵɤɥɸɱɟɧɚɧɚɠɚɬɢɟɧɚɥɸɛɭɸɤɧɨɩɤɭɜɤɥɸɱɢɬ
ɩɨɞɫɜɟɬɤɭɤɨɬɨɪɚɹɛɭɞɟɬɪɚɛɨɬɚɬɶɧɟɤɨɬɨɪɨɟɜɪɟɦɹɜɡɚɜɢɫɢɦɨɫɬɢ
ɨɬɷɤɪɚɧɚ
Ʉɨɝɞɚɩɨɞɫɜɟɬɤɚɜɵɤɥɸɱɟɧɚɧɚɠɚɬɢɟɥɸɛɨɣɤɧɨɩɤɢɜɤɥɸɱɚɟɬ
ɩɨɞɫɜɟɬɤɭɧɨɧɟɩɪɢɜɨɞɢɬɤɜɵɩɨɥɧɟɧɢɸɟɟɮɭɧɤɰɢɢɤɪɨɦɟ
ɤɧɨɩɤɢ>ȼɄɅȼɕɄɅ@
ű6ɂɧɞɢɤɚɬɨɪȼɄɅȼɕɄɅ
ɂɧɞɢɤɚɬɨɪɛɭɞɟɬɝɨɪɟɬɶɡɟɥɟɧɵɦɰɜɟɬɨɦɤɨɝɞɚɭɫɬɪɨɣɫɬɜɨ
ɧɚɯɨɞɢɬɫɹɜɪɚɛɨɬɟɂɧɞɢɤɚɬɨɪɛɭɞɟɬɦɢɝɚɬɶɩɪɢɜɤɥɸɱɟɧɢɢ
ɤɨɧɬɪɨɥɥɟɪɚɢɥɢɩɪɢɜɨɡɧɢɤɧɨɜɟɧɢɢɨɲɢɛɤɢ
ű7Ɏɭɧɤɰɢɨɧɚɥɶɧɚɹɤɧɨɩɤɚ>)@
Ƚɥɚɜɧɨɟɨɤɧɨɧɚɠɦɢɬɟɞɥɹɢɡɦɟɧɟɧɢɹɪɟɠɢɦɚɪɚɛɨɬɵ
Ƚɥɚɜɧɨɟɦɟɧɸɧɚɠɦɢɬɟɱɬɨɛɵɩɟɪɟɦɟɫɬɢɬɶɤɭɪɫɨɪɜɧɢɡ
ű8Ɏɭɧɤɰɢɨɧɚɥɶɧɚɹɤɧɨɩɤɚ>)@
Ƚɥɚɜɧɨɟɨɤɧɨɧɚɠɦɢɬɟɞɥɹɭɦɟɧɶɲɟɧɢɹɬɟɦɩɟɪɚɬɭɪɵ
Ƚɥɚɜɧɨɟɦɟɧɸɧɚɠɦɢɬɟɱɬɨɛɵɩɟɪɟɦɟɫɬɢɬɶɤɭɪɫɨɪɜɟɪɯ
ű9Ɏɭɧɤɰɢɨɧɚɥɶɧɚɹɤɧɨɩɤɚ>)@
Ƚɥɚɜɧɨɟɨɤɧɨɧɚɠɦɢɬɟɱɬɨɛɵɭɜɟɥɢɱɢɬɶɬɟɦɩɟɪɚɬɭɪɭ
Ƚɥɚɜɧɨɟɦɟɧɸɧɚɠɦɢɬɟɞɥɹɩɟɪɟɯɨɞɚɤɩɪɟɞɵɞɭɳɟɣɫɬɪɚɧɢɰɟ
ű0Ɏɭɧɤɰɢɨɧɚɥɶɧɚɹɤɧɨɩɤɚ>)@
Ƚɥɚɜɧɨɟɨɤɧɨɧɚɠɦɢɬɟɱɬɨɛɵɢɡɦɟɧɢɬɶɫɤɨɪɨɫɬɶɜɟɧɬɢɥɹɬɨɪɚ
Ƚɥɚɜɧɨɟɦɟɧɸɧɚɠɦɢɬɟɞɥɹɩɟɪɟɯɨɞɚɤɫɥɟɞɭɸɳɟɣɫɬɪɚɧɢɰɟ
ɂɧɬɟɪɮɟɣɫɤɨɧɬɪɨɥɥɟɪɚ
Fri
Room
Set temp.
Mode Temp. Fan
Cool Auto
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
789 07890
Ƚɥɚɜɧɨɟɨɤɧɨ Ƚɥɚɜɧɨɟɦɟɧɸ
ɉɨɞɫɤɚɡɤɚɩɨɮɭɧɤɰɢɹɦ

181
RU
ɇɚɢɦɟɧɨɜɚɧɢɟɞɟɬɚɥɟɣ
ȽɥɚɜɧɨɟɨɤɧɨɦɨɠɟɬɨɬɨɛɪɚɠɚɬɶɫɹɜɞɜɭɯɪɚɡɧɵɯɪɟɠɢɦɚɯɩɨɥɧɵɣɢȻɚɡɨɜɵɣɁɚɜɨɞɫɤɨɣɧɚɫɬɪɨɣɤɨɣɩɨɭɦɨɥɱɚɧɢɸɹɜɥɹɸɬɫɹɩɨɥɧɵɣ
ɪɟɠɢɦɨɬɨɛɪɚɠɟɧɢɹɑɬɨɛɵɩɟɪɟɤɥɸɱɢɬɶɫɹɜȻɚɡɨɜɵɣɪɟɠɢɦɢɡɦɟɧɢɬɟɩɚɪɚɦɟɬɪɜɧɚɫɬɪɨɣɤɟɝɥɚɜɧɨɝɨɨɤɧɚɋɦɪɭɤɨɜɨɞɫɬɜɨɩɨ
ɷɤɫɩɥɭɚɬɚɰɢɢɜɯɨɞɹɳɟɟɜɤɨɦɩɥɟɤɬɩɨɫɬɚɜɤɢɩɭɥɶɬɚɞɢɫɬɚɧɰɢɨɧɧɨɝɨɭɩɪɚɜɥɟɧɢɹ
ű1Ɋɟɠɢɦɪɚɛɨɬɵ
Ɂɞɟɫɶɨɬɨɛɪɚɠɚɟɬɫɹɪɟɠɢɦɪɚɛɨɬɵɜɧɭɬɪɟɧɧɟɝɨɛɥɨɤɚ
ű2Ɂɚɞɚɧɧɚɹɬɟɦɩɟɪɚɬɭɪɚ
Ɂɞɟɫɶɨɬɨɛɪɚɠɚɟɬɫɹɡɚɞɚɧɧɚɹɬɟɦɩɟɪɚɬɭɪɚ
ű3ɑɚɫɵɋɦɪɭɤɨɜɨɞɫɬɜɨɩɨɭɫɬɚɧɨɜɤɟ
Ɂɞɟɫɶɨɬɨɛɪɚɠɚɟɬɫɹɬɟɤɭɳɟɟɜɪɟɦɹ
ű4ɋɤɨɪɨɫɬɶɜɟɧɬɢɥɹɬɨɪɚ
Ɂɞɟɫɶɨɬɨɛɪɚɠɚɸɬɫɹɧɚɫɬɪɨɣɤɢɫɤɨɪɨɫɬɢɜɟɧɬɢɥɹɬɨɪɚ
ű5ɉɨɞɫɤɚɡɤɚɩɨɮɭɧɤɰɢɹɦɤɧɨɩɨɤ
Ɂɞɟɫɶɨɬɨɛɪɚɠɚɸɬɫɹɮɭɧɤɰɢɢɫɨɨɬɜɟɬɫɬɜɭɸɳɢɯɤɧɨɩɨɤ
ű6
Ɉɬɨɛɪɚɠɚɟɬɫɹɩɪɢɰɟɧɬɪɚɥɢɡɨɜɚɧɧɨɦɭɩɪɚɜɥɟɧɢɢɜɤɥɸɱɟɧɢɟɦɢ
ɜɵɤɥɸɱɟɧɢɟɦ
ű7
Ɉɬɨɛɪɚɠɚɟɬɫɹɩɪɢɰɟɧɬɪɚɥɢɡɨɜɚɧɧɨɦɭɩɪɚɜɥɟɧɢɢɪɟɠɢɦɨɦ
ɪɚɛɨɬɵ
ű8
Ɉɬɨɛɪɚɠɚɟɬɫɹɩɪɢɰɟɧɬɪɚɥɢɡɨɜɚɧɧɨɦɭɩɪɚɜɥɟɧɢɢɡɚɞɚɧɧɨɣ
ɬɟɦɩɟɪɚɬɭɪɨɣ
ű9
Ɉɬɨɛɪɚɠɚɟɬɫɹɩɪɢɰɟɧɬɪɚɥɢɡɨɜɚɧɧɨɦɭɩɪɚɜɥɟɧɢɢɮɭɧɤɰɢɟɣ
ɫɛɪɨɫɚɮɢɥɶɬɪɚ
ű0
Ɉɬɨɛɪɚɠɚɟɬɫɹɩɪɢɧɟɨɛɯɨɞɢɦɨɫɬɢɜɨɛɫɥɭɠɢɜɚɧɢɢɮɢɥɶɬɪɚ
ű1 Ʉɨɦɧɚɬɧɚɹɬɟɦɩɟɪɚɬɭɪɚɋɦɪɭɤɨɜɨɞɫɬɜɨɩɨɭɫɬɚɧɨɜɤɟ
Ɂɞɟɫɶɨɬɨɛɪɚɠɚɟɬɫɹɬɟɤɭɳɚɹɤɨɦɧɚɬɧɚɹɬɟɦɩɟɪɚɬɭɪɚ
ű2
Ɉɬɨɛɪɚɠɚɟɬɫɹɤɨɝɞɚɤɧɨɩɤɢɡɚɛɥɨɤɢɪɨɜɚɧɵ
ɉɨɥɧɵɣɪɟɠɢɦɨɬɨɛɪɚɠɟɧɢɹ!
ȼɫɟɡɧɚɱɤɢɩɨɤɚɡɚɧɵɞɥɹɢɥɥɸɫɬɪɚɰɢɢɢɨɩɢɫɚɧɢɹ
Ȼɚɡɨɜɵɣɪɟɠɢɦɨɬɨɛɪɚɠɟɧɢɹ!
ű3
ɈɬɨɛɪɚɠɚɟɬɫɹɤɨɝɞɚɜɤɥɸɱɟɧɚɮɭɧɤɰɢɹɌɚɣɦɟɪȼɄɅȼɕɄɅ
ɇɨɱɧɨɣɪɟɠɢɦɢɥɢȺɜɬɨɨɬɤɥɸɱɟɧɢɟɬɚɣɦɟɪɚ
ɩɨɹɜɥɹɟɬɫɹɤɨɝɞɚɬɚɣɦɟɪɨɬɤɥɸɱɟɧɰɟɧɬɪɚɥɢɡɨɜɚɧɧɨɣ
ɫɢɫɬɟɦɨɣɭɩɪɚɜɥɟɧɢɹ
ű4
Ɉɬɨɛɪɚɠɚɟɬɫɹɤɨɝɞɚɜɤɥɸɱɟɧɬɚɣɦɟɪɧɚɧɟɞɟɥɸ
ű5
Ɉɬɨɛɪɚɠɚɟɬɫɹɩɨɤɚɢɡɞɟɥɢɟɪɚɛɨɬɚɟɬɜɪɟɠɢɦɟɷɧɟɪɝɨɫɛɟɪɟɠɟɧɢɹ
ɧɟɩɨɹɜɢɬɫɹɧɚɧɟɤɨɬɨɪɵɯɦɨɞɟɥɹɯɜɧɭɬɪɟɧɧɢɯɛɥɨɤɨɜ
ű6
Ɉɬɨɛɪɚɠɚɟɬɫɹɩɨɤɚɧɚɪɭɠɧɵɣɛɥɨɤɪɚɛɨɬɚɟɬɜɬɢɯɨɦɪɟɠɢɦɟ
ɗɬɚɢɧɞɢɤɚɰɢɹɧɟɞɨɫɬɭɩɧɚɜɦɨɞɟɥɹɯ&,7<08/7,
ű7
Ɉɬɨɛɪɚɠɚɟɬɫɹɤɨɝɞɚɜɫɬɪɨɟɧɧɵɣɬɟɪɦɨɪɟɡɢɫɬɨɪɧɚɤɨɧɬɪɨɥɥɟɪɟ
ɜɤɥɸɱɟɧɞɥɹɧɚɛɥɸɞɟɧɢɹɡɚɤɨɦɧɚɬɧɨɣɬɟɦɩɟɪɚɬɭɪɨɣ1
ɨɬɨɛɪɚɠɚɟɬɫɹɤɨɝɞɚɬɟɪɦɨɪɟɡɢɫɬɨɪɧɚɜɧɭɬɪɟɧɧɟɦɛɥɨɤɟ
ɜɤɥɸɱɟɧɞɥɹɧɚɛɥɸɞɟɧɢɹɡɚɤɨɦɧɚɬɧɨɣɬɟɦɩɟɪɚɬɭɪɨɣ
ű8
Ɉɬɨɛɪɚɠɚɟɬɫɹɜɫɥɭɱɚɟɪɚɛɨɬɵɭɫɬɪɨɣɫɬɜɜɷɧɟɪɝɨɫɛɟɪɟɝɚɸɳɟɦ
ɪɟɠɢɦɟɩɪɢɧɚɥɢɱɢɢɞɚɬɱɢɤɚ'L6HH
ű9
Ɉɬɨɛɪɚɠɚɟɬɧɚɫɬɪɨɣɤɭɭɝɥɚ
ű)
Ɉɬɨɛɪɚɠɚɟɬɧɚɫɬɪɨɣɤɭɠɚɥɸɡɢ
ű!
Ɉɬɨɛɪɚɠɚɟɬɧɚɫɬɪɨɣɤɭɜɟɧɬɢɥɹɰɢɢ
ű@
Ɉɬɨɛɪɚɠɚɟɬɫɹɤɨɝɞɚɨɝɪɚɧɢɱɟɧɞɢɚɩɚɡɨɧɡɚɞɚɧɧɵɯɬɟɦɩɟɪɚɬɭɪ
ȻɨɥɶɲɚɹɱɚɫɬɶɩɚɪɚɦɟɬɪɨɜɡɚɢɫɤɥɸɱɟɧɢɟɦȼɄɅȼɕɄɅɪɟɠɢɦɚɫɤɨɪɨɫɬɢɜɟɧɬɢɥɹɬɨɪɚɢɬɟɦɩɟɪɚɬɭɪɵɦɨɠɟɬɛɵɬɶɧɚɫɬɪɨɟɧɚɜ
ɝɥɚɜɧɨɦɨɤɧɟɋɦɪɭɤɨɜɨɞɫɬɜɨɩɨɷɤɫɩɥɭɚɬɚɰɢɢɜɯɨɞɹɳɟɟɜɤɨɦɩɥɟɤɬɩɨɫɬɚɜɤɢɩɭɥɶɬɚɞɢɫɬɚɧɰɢɨɧɧɨɝɨɭɩɪɚɜɥɟɧɢɹ
ɂɧɞɢɤɚɰɢɹ
Fri
Mode Temp. Fan
Room
Cool Set temp.
Fri
Cool
Mode Temp. Fan
AutoSet temp.
2
1
5
6
7
8
90
1
3
)
4
!
7
@
2345 6 8 2
1
5
4
3
9