MJ MJ-EASYTRAVEL BELT User manual

USER MANUAL
Holmstrupgårdvej 250, DK8210 Århus V MJ-EASYTRAVEL BELT
Page 1of 6
It is important to read this manual before installation and use of MJ-Easytravel belt as well
as the advice given on the safety and use followed to ensure the optimal utilization of the
MJ-Easytravel belt.
MJ-Easytravel belt is designed for use in the positioning of PWD that causes uncontrolled
movements, or for active persons who run the risk of leaving the seat in a vehicle, -the
standard safety belt which may cause a risk of falling or ejection during transport.
•The Easytravel belt is designed and tested in accordance with DS/EN ISO
10525:2007 Personnel lifting for disabled persons – Requirements for test methods.
•The test is performed as a static test, the specified person weight for use, with a
safety factor of 2, is set at 220 kg.
MJ-Easytravel belt is used in connection with a seat with backrest which is attached to the
vehicle.
MJ-Easytravel belt designed for use by children and adult.
MJ-Easytravel belt is NOT a safety belt, but a positioning belt to ensure the Person proper
location on the seat.
Table of Contents
1. CE Declaration of Conformity.
2. The use
3. Use with harness pillow, harness pillow with backrest and safety seat.
4. Maintenance.
5. Warranty

USER MANUAL
Holmstrupgårdvej 250, DK8210 Århus V MJ-EASYTRAVEL BELT
Page 2of 6
1. CE Declaration of Conformity
CE Declaration of Conformity
MJ Autosadelmager
Holmstrupvej 250
8210 Århus V
Hereby declares that MJ-Easytravel belt is manufactured in accordance with the
Regulation (EU) 2016/425 of the Parliament and the Council of 9. march 2016 on
personal protective equipment cat. II.
MJ-Easytravel belt is designed for
positioning of PWD that causes uncontrolled
movements, or for active persons who run the risk of leaving the seat in a vehicle, -the
standard safety belt which may cause a risk of falling or ejection during transport.
Furthermore, the product is subject to the following standards and circulars:
DS/EN 12182:2012 Assistive products for persons with disability. General requirements
and test methods.
ISO 13688:2013. Protective Clothing – General requirements.
EN 13210:2004. Childcare articles. Children´s safety harnesses reins, and similar type
articles. Safety requirements and test methods.
EN 365 General requirements for the use, maintenance, periodic inspection, repair,
marking and packaging.
Danish Working Environment Authority, Bek. No 210 of 14/03/2018, about Personal
protection and safety.
DK8210 Århus V, date 19.07.2020.
Morten Jespersen

USER MANUAL
Holmstrupgårdvej 250, DK8210 Århus V MJ-EASYTRAVEL BELT
Page 3of 6
2. The use:
Place the person in the seat
and adjust the crotch strap
around the person and lock the
snap lock.
Crotch strap buttoned with the
vest buttons on the front of the
vest
The belt is designed as a vest,
the person is dressed in the vest
and the vest is closed.
Crotch strap with a lock is
inserted between the seat and
the backrest, and top strap
attached to the vest, is placed
over the back of the seat.

USER MANUAL
Holmstrupgårdvej 250, DK8210 Århus V MJ-EASYTRAVEL BELT
Page 4of 6
Safety:
When the person is placed and positioned by MJ-Easytravel belt, put on the vehicle's
safety seat belt around the person, in accordance with regulations for the transport of
children and adolescents.
Never leave children or young people unattended, when they are fixed with MJ-Easytravel
belt.
The person is now fixed in the seat.
Make sure the belt is closed and
adjusted.
1 Set the crotch strap, not too tight.
The setting is made on the back of
the seat backrest and allowed it to be
that tight a flat hand can be
placed under the belt.
2 Set the hip strap with lock around the
seat, the adjustment takes place on
the back of the seat backrest and
allowed it to be that tight a flat hand
can be placed under the strap.
Place the 2 horizontal straps
attached to the vest around the
backrest, set and lock them.

USER MANUAL
Holmstrupgårdvej 250, DK8210 Århus V MJ-EASYTRAVEL BELT
Page 5of 6
3.Use with harness pillow, harness pillow with backrest and safety seat.
The seat cushion is placed on
the vehicle seat
The MJ-Easytravel belt harness
is placed around the vehicle seat
and under the vehicle seat belt,
as shown in section 2.
The seat cushion with backrest
is placed on the vehicle seat
The MJ-Easytravel belt harness
is placed around the vehicle
seat, under the vehicle's seat
belt, as shown in section 2.
The child seat is placed and
fixed as described in its
instruction manual, this can be
accomplished by the use of the
vehicle's safety belt or Isofix
fitting.
The MJ-Easytravel belt harness
is placed under the car seat's
approved seat belt and fastened
around the car seat and
backrest.

USER MANUAL
Holmstrupgårdvej 250, DK8210 Århus V MJ-EASYTRAVEL BELT
Page 6of 6
4.Maintenance.
Daily maintenance before use, inspect MJ-Easytravel belt for damage and wear, also
check the locks functions.
MJ-Easytravel belt must be send for repair, if there are any damage or wear.
MJ-Easytravel belt is made of breathable 90% cotton and 10% viscose.
MJ-Easytravel belt can be washed at 40˚C, do not use tumble dryer for drying after wash.
Disposal.
When MJ-Easytravel belt should no longer be used, this can be sent for destruction of
recyclable ferrous waste and combustible material.
5.Warranty.
The manufacturer's warranty covers manufacturing, materials and function of the
equipment supplied. The warranty is applicable when the equipment is operated in
accordance with instructions for use and for the purpose for which the equipment is
delivered.
The warranty covers repair of defects in the equipment supplied, and not possible effects
caused by these.
All repairs and replacement of components during the warranty period shall not be made
without prior consent and approval of the manufacturer.
The warranty period is under current law or 2 years from the date of production.
OnConsult, 19.07.2020.
Translation of the original user manual.