Mocka Winnie Chair User manual

A
Small Bolt
M6x16mm
x12
B
Large Bolt
M6x60mm
x3
C
Spring Washer
x17
D
Flat Washer
x17
E
Allen Key
x1
G
Bolt
M6x31.5mm
x2
H
Backrest
x1
I
Seat
x1
J
Back Leg
x1
K
Front Leg1
x1
L
Left Frame
x1
M
Right Frame
x1
Winnie Chair
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
F
Large
Screw x2
Phillips screwdriver
For quicker assembly, we recommend the use of a power drill on a low-speed setting.

12
2
Winnie Chair
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x Front Leg (K), 1 x Back Leg (J), 1 x Left Frame (L) and 1 x
Right Frame (M) and secure with 12 x Small Bolts (A), 12 x Spring
Washers (C) and 12 x Flat Washers (D). Tighten with an Allen Key (E).
Tighten all of the pre-installed screws with a screwdriver.
Attach 1 x Seat (I) and secure with 3 x Large Bolts (B), 3 x Spring
Washers (C) and 3 x Flat Washers (D). Tighten with an Allen Key (E).
Attach Back Leg (J) to the Seat (I) as shown and secure with 2x Large
Screws (F). Tighten with a Screwdriver.
E
A
A
C
C
D
D
E
E
EB
BB
KK
J
J
C
CC
D
DD
F
I
L M

3
3
Winnie Chair
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Secure 1 x Backrest (H) with 2 x Small Bolts (G), 2 x
Spring Washers (C) and 2 x Flat Washers (D).
Tighten the screws 50%
4
G
H
J
J
H
H
E
C
D
Attach 1x Backrest (H) as shown making sure to click into place.
Then tighten Small Bolts (G) with a screwdriver. You’re done, enjoy!