Mocka Alta Change Table User manual

Alta Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x31
A B C D E F GH
JK
I
Hardware Supplied
dowel
x34
screw
x20
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
handle shelf
plug
x8
x3
locking
nut x31
screw
x10
x8
wedge plastic
glide x4
Phillips & Flathead screwdrivers
and hammer required
L M NOP Q
screw
x8
handle
screw
x6
R
long
screw
x10
hinge
x2
hinge
screw x12

Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1 2
Attach 2x slide rails (F) to panel [2] and secure with 6x screws (E).
Insert 5x bolts (C) into panels [2]. Tighten with a screwdriver.
Attach 2x slide rails (G) to panel [3] and secure with 6x screws (E).
Insert 2x bolts (C) into panels [3]. Tighten with a screwdriver.
.
C
C
C
C
C
E
E
E
E
E
E
C
C
E
E
E
E
E
E
F
CL
E
G
G
G
CR
2
3
E
F
F

D
Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Insert 3x bolts (C) into panel [6]. Tighten with a screwdriver. Attach panel
[5] to panel [6] and secure with 3x locking nuts (D). Tighten with a screwdriver.
Insert 3x bolts (C) into panels [4]. Tighten with a screwdriver.
C
CC
C
C
C
D
D
D
4
6
6
5

Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panel [3] to panel [5] with 2x dowels (A) and secure
with 2x screws (B). Tighten with a screwdriver.
Attach panel [7] to panel [3] with 2x dowels (A) and secure with 2x locking
nuts (D). Tighten with a screwdriver.
B
B
B
A
A
AD
D
5
3
3
7

Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panel [2] to panels [5], [6] and [7] with 5x dowels (A) and secure
with 5x locking nuts (D). Tighten with a screwdriver.
Attach panel [4] to panels [5] and [6] with 3x dowels (A) and secure
with 3x locking nuts (D). Tighten with a screwdriver. Attach 4x plastic
glides (K) to the panels [2] and [4] using a hammer as shown.
5
K
K
K
K
K
A
A
A
A
D
D
D
D
A
A
A
D
D
D
7
2
2
6
4
5
6

Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 10
Slide panels [8] and [9] down along the grooves between the
panels [2], [3] and [4] as shown.
C
C
C
C
C
C
8
9
1
4
3
2
Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver.

10
Alta Change Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11
Assembly Instructions
12
C
C
D
D
D
D
10
10
10
1
11
11
11
x2
10
Insert 2x bolts (C) into panel [10] as shown. Tighten with a screwdriver.
Attach panels [10] to panel [11] with 8x dowels (A) and secure with 4x
locking nuts (D). Tighten with a screwdriver.
Attach panel [1] to panels [10] and [11] with 8x dowels (A) and
secure with 10x long screws (R). Tighten with a screwdriver.
R
R
RR
R
R
R
R
R
A
AA
A
R
A
A
A
A

13
Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
14 Drawer x2
Insert 8x bolts (C) to panels [12]. Tighten with a screwdriver.
C
C
C
C
D
D
D
D
A
A
A
A
2
3
1
12
4
Attach panel [1] to panels [2], [3] and [4] with 6x dowels (A) and
secure with 6x locking nuts (D). Tighten with a screwdriver.

Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 Drawer x2 16 Drawer x2
Slide panel [15] down along the grooves between panels [13]
and [14].
D
D
DD
12
14
13
14
13
15
Attach panels [13] and [14] to panel [12] with 8x locking nuts (D)
Tighten with a screwdriver.

B
B
Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17Drawer x2 18 Drawer x2
Attach slide rails (H) and slide rails (I) to the underside of the side panels
as shown. Secure with 8x screws (E) and tighten with a screwdriver.
E
E
I
E
E
H
B
B
14
14
16
13
13
Attach panels [13], [14] and [16] as shown using 8x screws (B).
Tighten with a screwdriver.

Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
11
2019 Drawer x2
Q
Q
12
17
Attach 1x handle (O) to panel [12] secure with 4x handle screws (Q).
Tighten with a screwdriver.
Attach 2x hinges (M) to panel [17] secure with 4x hinge screws (N).
Tighten with a screwdriver.
O
M
M
N
NN
M
N
N
N

Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
12
21
Q
M
M
N
N
Q
17
Insert 8x shelf plugs (P) into the unit at the desired height for the shelves
and rest the shelf panels [18] onto them. Ensure the shelves are balanced
and stable.
Attach hinge on panel [4] to the unit using 8x hinge crews (N).
Tighten with a screwdriver. Ensure the doors open and close easily.
Attach 1x handle (O) to panel [17] secure with 2x handle screws (Q).
Tighten with a screwdriver.
22
O
4
M
N
NOTE: If the doors are
uneven or there is a gap
in the middle, loosen or
tighten the screw on the
door hinge until they are
sitting flush.
18
18
34
P
P

23
Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
13
24
V
Z
W
V
Z
W
J
L
J
L
Attach 8x wedges (J) into the corners of the back of the unit and
secure with 8x screws (L). Tighten with a screwdriver. Attach 1x
safety strap (V) to the top of the back side of the unit as shown
using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.

Z
X
Y
wall
anchor
screw
strap
washer
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before
use.
25
Alta Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
14
26
You’re done, enjoy!