Mocka Aspiring Cot Toddler Bed Conversion User manual

Bolt
x4
(COT NOT INCLUDED)
Aspiring/Darby Cot Toddler Bed Conversion
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Dowel
x2
Allen Key
x1
Hardware Supplied

12
2
Aspiring/Darby Cot Toddler Bed Conversion
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Remove the X screws already installed in the cot with an Allen Key (C).
Please hold onto the X screws as you will need these to install the
conversion.
X
X
X
X
X
C
Remove the Z screws already installed in the cot base with an
Allen Key (C). You will not need these screws to attach the
Conversion.
Z
Z
Z
C

Insert 2 x Dowels (B) into Panel [2]. Attach Panels [1] to Panel [2] and
secure with 4 x Bolts (A). Tighten with an Allen Key (C).
C
A
A
A
A
A
B
B
A
1
1
2
4
3
Aspiring/Darby Cot Toddler Bed Conversion
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach the conversion to the cot and secure with the 4x (X) screws that
3
were earlier removed from the cot ends. Tighten with an Allen Key (C).
You're done, enjoy!
X
X
X
X
X
C