Mocka Aspen User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Aspen
Cot Toddler Bed Half Frame
Thank you for your purchase.
Please follow the instructions below for correct assembly
A B
6x
bolt
3x
bolt
C
2x
dowel
Hardware Supplied
D
1x
alien key

Aspen
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
21
Cot Toddler Bed Half Frame
2
Remove the X and Y bolts already installed in the cot with
Allen Key (D). Please hold onto the X bolts as you will need
these to install the half frame toddler.
Insert 2 x Dowels (C) into Panel [3]. Attach Panel [1] and Panel [2]
to Panel [3] and secure with 4 x Bolts (A). Tighten with Allen Key (D).

Aspen
Cot Toddler Bed Half Frame
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach Panel [4] to Panel [1] and [3] and secure with 3 x Bolts (8).
Tighten with Allen Key (D).
3 4
Attach the assembled parts in step 3 to the cot and insert 2x (A)
cotbolts . as Tighten shown. all bolts Insert with the 2x Allen bolts
key (X) (D). that You're were done, taken out enjoy! of your