Mocka Maya Six Drawer User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Phillips & Flathead screwdrivers required
Maya Six Drawer
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
BC D E F A
J
dowel
x16
screw
x20
K
bolt
x34
locking
nut
x34
small
screw
x60
long
screw
x6
LM
CL
runner
tracks
x6
CR
runner
tracks
x6
DL
runners
x6
DR
runners
x6
G
wedge
x8
H
screw
x8
N
bracket
x4
O
felt
pad
x4
adjuster
x1
P
I
screw
x24
Wall Mount
x2
washer
Z
wall
screw
Y
wall
anchor
x1
X
safety
strap x1
W
V
screw
x1
x1

12
Insert 6x bolts (A) and 6x dowels (C) into panel [1]. Tighten with
a screwdriver.
Maya Six Drawer
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Attach 3x CL runner track (J) to panel [2] and secure with 9x small
screws (F). Attach 3x CR runner track (K) to panel [3] and secure
with 9x small screws (F). Insert 4x bolts (A) and 4x dowels (C) into
panels [2] and [3]. Tighten with a screwdriver.
A
A
1A
A
A
A
C
C
C
C
C
C
3
2
A
C
K
F
F
F
F
F
F
K
F
F
F
K
F
F
F
A
C
J
F
F
F
J
A
C
F
F
F
J
A
C
J
CL
F
F
K
CR

Attach 3x CL runner tracks (J) to panels [5] , and secure with 9x
small screws (F). Flip panels [5] over, attach 3x CR runner tracks
(K) to panels [5], and secure with 9x small screws (F). Tighten
with a screwdriver.
34
Attach panels [2] and [3] to 2x panels [6] and secure with 4x locking nuts
(B) and tighten with a screwdriver.
Maya Six Drawer
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
5
K
F
F
F
K
F
F
F
K
F
F
F
F
F
F
J
F
FF
J
F
FF
J
52
3
6
6
B
B
B
B
B
J
CL
F
F
K
CR

Attach panel [5] to panels [6] as shown.
5
Attach the unit to panel [1] secure with 6x locking nuts (B).
Tighten with a screwdriver.
Maya Six Drawer
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
B
B
6
6
5
5
3
2
1
B
B

5
3
2
C
C
C
C
D
D
D
D
D
D
4
Slide panels [7] between the grooves of panels [1], [2], [3] and [5] to
form the back of the unit, as shown.
7
Attach panel [4] as shown using 6x dowels (C) and 6x long
screws (D) and tighten with a screwdriver.
Maya Six Drawer
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
5
3
2
1
7
7

Jolt Wardrobe
mocka.co.nz | mocka.com.au
9
Attach 4x brackets (N) to panel [4] and secure with 20x
screws (E), and tighten with a screwdriver.
Maya Six Drawer
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
Turn 4 x legs [8] into brackets (N) until firm. Apply 4 x felt pads (O)
to legs [8] as shown. Turn 1x support leg [14] into panel [4] until
firm. Insert the adjuster (P) into the middle support leg.
4
N
N
N
N
8
8
8
8
O
O
O
O
E
N
E
N
N
E
E
E
N
N
P
14
P
4
14

Jolt Wardrobe
mocka.co.nz | mocka.com.au
11
Insert 4x bolt (A) into panel [9]. Tighten with a screwdriver.
Maya Six Drawer
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
12
Attach panels [10] and [11] to panel [9] with 4x locking nuts (B).
Tighten with a screwdriver.
Drawers x6
11
10
B
B
B
B
A
A
A
A
Drawers x6
9
9
B

Jolt Wardrobe
mocka.co.nz | mocka.com.au
13
Slide panel [12] along the grooves between the side panels [10] and
[11] to form the base of the drawer.
Maya Six Drawer
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
14
Attach panels [13], [10] and [11] with 4x screws (I). Tighten with a
screwdriver.
Drawers x6Drawers x6
12
11
10
13
10
I
I
I
I
11
9

Jolt Wardrobe
mocka.co.nz | mocka.com.au
15
Attach DL runner (L) to panel [10] and DR runner (M) to panel [11] with
4x small screws (F). Tighten with a screwdriver. Complete the other
five drawers.
Maya Six Drawer
Assembly Instructions
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
16
Insert the completed drawers into the main unit as shown, ensuring
they slide easily along the rails.
Drawers x6
F
F
F
F
L
M
11
10

Jolt Wardrobe
mocka.co.nz | mocka.com.au
17
Attach 8x wedges (G) to the corners of the 2x panels [7] as
shown, and secure with 8x small screws (H). Tighten with a
screwdriver.
Maya Six Drawer
Assembly Instructions
10
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
18
Attach 1x safety strap (V) and 1x washer (Z) to top panel and secure
with 1x screw (W). Tighten with a screwdriver.
H
G
7
H
G
H
G
H
G
H
G
H
G
H
G
H
G
H
G
7
1
V
Z
W
V
W
Z
Wall Strap

Jolt Wardrobe
mocka.co.nz | mocka.com.au
19
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to the
wall using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit
is balanced and steady before use. You’re done, enjoy!
Maya Six Drawer
Assembly Instructions
10
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
X
Y
Z
XY
Z