Mocka Make-Up Table User manual

A B CD
E F G
Phillips & Flathead screwdrivers required
Hardware Supplied
dowel
x34
screw
x6
bolt
x20
locking
nut x20
screw
x10
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
slide
rail x2
slide
rail x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
x1
washer
Z
wall
screw x1
r/washer
screw
x1
Y
wall
anchor
x1
X
safety
strap x1
Wall Strap
W
H
covers
x10
Mocka Make-Up Table
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach panel [12] to panel [13] using 2x dowels (C). Repeat this step to
assemble another section.
Attach the other panels [12] to panel [13] with 4x dowels (C) as shown.
13
12
C
C
C
C
C
C
12
12
13
x2
Mocka Make-Up Table
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach panel [12] to panel [13] using 2x dowels (C). Repeat this step to
assemble another section.
Attach the other panels [12] to panel [13] with 4x dowels (C) as shown.
13
12
C
C
C
C
C
C
12
12
13
x2
34
Attach panels [12] to panel [11] using 8x dowels (C). Attach 1x slide rail (F) to panel [9] using 2x screws (E). Attach 1x slide
rail (F) to panel [10] using 2x screws (E). Tighten with a screwdriver.
10
9
11
C
C
CCC
F
E
E
F
E
E
13 12
13
12 12 12
Mocka Make-Up Table
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach panel [9] to panel [13] using 2x dowels (C) and secure with 2x
screws (D). Attach panel [10] to panel [13] using 2x dowels (C) and
secure with 2x screws (D). Tighten with a screwdriver.
Slide panel [7] along the grooves between panels [9] and [10].
10
9
7
C
C
D
D
D
D
C
C
13
13
10
9
Mocka Make-Up Table
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach panel [9] to panel [13] using 2x dowels (C) and secure with 2x
screws (D). Attach panel [10] to panel [13] using 2x dowels (C) and
secure with 2x screws (D). Tighten with a screwdriver.
Slide panel [7] along the grooves between panels [9] and [10].
10
9
7
C
C
D
D
D
D
C
C
13
13
10
9
78
Attach panels [8] to panel [11] as shown using 2x screws (D). Tighten
with a screwdriver.
Attach panel [6] as shown using 8x dowels (C), 6x bolts (A) and secure
with 6x locking nuts (B) as shown. Tighten with a screwdriver. Use 4x
stickers (H) to cover the holes where locking nuts (B) are used as shown.
6
11
B
D
D
BA
A
C
C
CCCA
B
B
B
B
A
A
8
8
10
9
10
9
H
H
H
Mocka Make-Up Table
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Attach 1x slide rail (G) to panel [2] using 3x screws (E). Attach 1x slide
rail (G) to panel [3] using 3x screws (E). Tighten with a screwdriver.
Attach panel [4] to panel [2] using 2x bolts (A) and secure with 2x locking
nuts (B). Attach panel [5] to panel [2] using 1x dowel (C), 1x bolt (A) and
secure with 1x locking nut (B). Tighten with a screwdriver. Use 2x
stickers (H) to cover the holes where locking nuts (B) are used.
5
4
3
G
EEE
GE
E
E
G
E
B
B
A
AB
2
2
C
A
H
H
H
Mocka Make-Up Table
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
Attach 1x slide rail (G) to panel [2] using 3x screws (E). Attach 1x slide
rail (G) to panel [3] using 3x screws (E). Tighten with a screwdriver.
Attach panel [4] to panel [2] using 2x bolts (A) and secure with 2x locking
nuts (B). Attach panel [5] to panel [2] using 1x dowel (C), 1x bolt (A) and
secure with 1x locking nut (B). Tighten with a screwdriver. Use 2x
stickers (H) to cover the holes where locking nuts (B) are used.
5
4
3
G
EEE
GE
E
E
G
E
B
B
A
AB
2
2
C
A
H
H
H
11
12
Attach panel [4] to panel [3] using 2x bolts (A) and secure with 2x
locking nuts (B). Attach panel [5] to panel [3] using 1x dowel (C), 1x bolt
(A) and secure with 1x locking nut (B). Tighten with a screwdriver. Use
2x stickers (H) to cover the holes where locking nuts (B) are used.
Insert 8x bolts (A) into panel [1] and attach 1x safety strap (W) using 1x
screw (Y). Tighten with a screwdriver.
3
2
A
A
B
B
C
A
B
5
4
A
A
A
A
A
A
A
A
Y
W
1
Wall Strap
H
B
A
H
H
Mocka Make-Up Table
Assembly Instructions
7
mocka.co.nz | mocka.com.au

13 14
Insert the drawers into the unit ensuring it smoothly and easily slides
along the rails.
6
2
Attach panel [1] to panels [2] and [3] using 4x dowels (C) and secure with
8x locking nuts (B). Tighten with a screwdriver. Use 2x stickers (H) to
cover the rear holes where locking nuts (B) are used.
1
AA
A
B
B
A
A
A
C
C
C
C
3
2
H
H
Mocka Make-Up Table
Assembly Instructions
8
mocka.co.nz | mocka.com.au

13 14
Insert the drawers into the unit ensuring it smoothly and easily slides
along the rails.
6
2
Attach panel [1] to panels [2] and [3] using 4x dowels (C) and secure with
8x locking nuts (B). Tighten with a screwdriver. Use 2x stickers (H) to
cover the rear holes where locking nuts (B) are used.
1
AA
A
B
B
A
A
A
C
C
C
C
3
2
H
H
15 16
Ensure the unit is balaced and steady before use. You’re done, enjoy!
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (W). Fasten to wall
using 1x wall plug (X), 1x washer (Z) and 1x wall screw (not supplied).
Wall Strap
XZ
W
W
Z
X
Mocka Make-Up Table
Assembly Instructions
9
mocka.co.nz | mocka.com.au