Modern Flames WMC LPM Series User manual

WALL MOUNTED STUDIO SUITE DISPLAY FORWALL MOUNTED STUDIO SUITE DISPLAY FOR
THE LANDSCAPE PRO MULTI FIREPLACETHE LANDSCAPE PRO MULTI FIREPLACE
Owner/Installation Guide
HOW TO INSTALL VIDEO
customerservice@modernames.com modernames.com
07-00038
Covers Part Numbers:
WMC-xxLPM-xxx
44-56-68-80-96 CS-DW-RTF-WW

customerservice@modernames.com modernames.com
02
o Instruction guide
o Top/Bottom LPM cabinet suite
Assembly, Parts & Hardware List
o Size-specic wall mount bracket o Hardware kit: Image is example only.
#8x1" Screws #8x1-5/8" Screws
#Hollow wall anchors #8x3/4" Self-drilling screws
#8x1" Screws
What's in the Box
o Power Cord
o Matching side pieces
o Cabinet mount brackets P/N: 02-00595
o WMC spacers (Not applicable to all replaces).
Note: color and nish of items will vary.

customerservice@modernames.com modernames.com
03
Assembly, Parts & Hardware List
Verify you have the correct suite for your replace
by checking the part number.
WMC-xxLPM-xxx
Size of the replace
44-56-68-80-96
Finish of the Suite
CS-DW-RTF-WW
EXAMPLE OF FINISH
(RTF is a ready-to-paint white primer nish, not shown.)

customerservice@modernames.com modernames.com
04
Installation and Assembly
1
Select a suitable location for your installation while taking into consideration the type of
installation, the running of your electrical, and the overall size of the nished installation.
Installed suite dimensions
2
Unpack and separate the contents of the Wall mounted Studio Suites for the Landscape Pro
Multi. Reference page 2 to verify contents. If any contents missing contact Modern Flames
customer service at 1-877-246-9353 or via email at customerservice@modernames.com.
o 44in LPM Version = 58.5" W x 28" H x 14.5" D.
o 56in LPM Version = 70.5" W x 28" H x 14.5" D.
o 68in LPM Version = 82.5" W x 28" H x 14.5" D.
o 80in LPM Version = 94.5" W x 28" H x 14.5" D.
o 96in LPM Version = 110.5" W x 28" H x 14.5" D.
Note: "96" is a custom size, please call for availability.

customerservice@modernames.com modernames.com
05
Installation and Assembly
3
Locate the studs on the wall to install size-specic wall mount bracket. You must be able to
secure a minimum of 2 studs for proper installation and as close to the end of the bracket as
possible. The hollow wall anchors provided are only for additional support between studs.
4
Measure where you would like the top of the replace to be by installing bracket on replace
and referencing where the bracket sits from the top of the replace. The bracket can now
be used to locate the replace on the wall by placing and holding on the wall to the desired
height and location. Ensure you will be able to secure the bracket to a minimum of two studs.
Level the bracket then mark the slots where you will secure the bracket to the studs and wall
using the wall anchors.

customerservice@modernames.com modernames.com
06
Installation and Assembly
5
Secure your bracket and align it with marks so that you can mount the bracket. It is recom-
mended to pre-drill holes before installation. When using hollow wall anchors, the anchors
need to be installed before installing the wall mounting bracket. Note: Anchors should be
installed with a Phillips tip screwdriver and not with a drill.
Wall anchor

customerservice@modernames.com modernames.com
07
Installation and Assembly
6
Run a hardwire line or locate an outlet 2.25" to the right side of the bracket. The space
where the outlet can be installed measures: 4”W x 4.5” H. Outlet position can be horizontal
or vertical.
7
Depending on your replace you may need to install spacers (x2) 1 per each side of the
replace as shown in the image. If your replace needs the spacer, locate, and remove the 2
screws shown below. Using the removed screws, align and install the spacers on each side.
Outlet
Spacer

customerservice@modernames.com modernames.com
08
Installation and Assembly
8
If using the power cord, attach the power cord to the replace going through the side
access. Connect the power cord hot connection (black wire) to L1 on the replace terminal
block, the power cord neutral connection (white wire) to N on the terminal block, and the
ground wire (green wire) to the ground on the terminal block.
Screws
Electrical access

customerservice@modernames.com modernames.com
09
Installation and Assembly
"Example shown from rear of replace"Neutral Ground Line/Hot
TURN OFF POWER FROM CIRCUIT BREAKER FIRSTTURN OFF POWER FROM CIRCUIT BREAKER FIRST
Terminal Block

customerservice@modernames.com modernames.com
10
Installation and Assembly
9
Lift the replace onto the wall mount bracket, ensuring both hooks on the bracket secure
into the replace.
Slots in replace for
bracket hooks.

customerservice@modernames.com modernames.com
11
Installation and Assembly
10
While pushing the replace towards the bracket and with the #8x3/4" self-drilling screws
(x4), secure the replace to the bracket.
Self-drilling
screws
Wall bracket

customerservice@modernames.com modernames.com
12
11
Power cord can now be connected to the outlet. Secure excess cable.
13
Installation and Assembly
12
Install cabinet mount brackets to all four corners. See the below examples. On some versions
of the LPM replace, a self-tapping screw for the front hole will be needed.
Power cord
Front hole

customerservice@modernames.com modernames.com
13
Installation and Assembly
14
Fireplace media and glass can now be installed. Reference the replace manual for details.
Corner (1) (2)
(4)
Side glass (1) (2)
Front glass
13
Binding may occur if there is not a 3/4" gap between bracket and drywall stop and if top or
bottom is not inserted leveled and evenly on both sides.
(3)

customerservice@modernames.com modernames.com
14
Installation and Assembly
Installation and Assembly
15
Evenly slide the bottom suite onto the replace by sliding it between cabinet mount
brackets and drywall stops. If binding occurs ensure it is being inserted evenly and level.

customerservice@modernames.com modernames.com
15
Fireplace Installation
16
Evenly slide the top suite onto the replace by sliding it between cabinet mount brackets
and drywall stops. Tuck any excess power cord wire in the cabinet cavity to ensure the top
is fully inserted. If binding occurs ensure it is being inserted and leveled.

customerservice@modernames.com modernames.com
16
Fireplace Installation

customerservice@modernames.com modernames.com
17
Fireplace Installation
17
Starting at drywall stop, slide the side piece in, then push the remaining into place.
Repeat the same step on the other side of the replace. Note these are friction t, if there is
not enough friction, a construction adhesive or double sided tape may be used to secure it
to the replace.

customerservice@modernames.com modernames.com
18
Fireplace Installation

customerservice@modernames.com modernames.com
19
DO NOT RETURN TO STORE!
CALL US FIRST
For immediate help with installation, product information
or if your product arrives damaged,
please call our toll free number at:
1-877-246-9353
(Monday - Friday, 8:00AM - 5:00PM, AZ Mountain Time)
Or email us at:
customerservice@modernames.com
OUR STAFF IS READY TO PROVIDE ASSISTANCE

customerservice@modernames.com modernames.com
20
Thank you for choosing Modern Flames, we appreciate all
our customers and hope you have many years of enjoyment
of our products.
Take a look at our other products
from our RPG Brands family of companies
GrandCanyonGasLogs.com
For all your indoor, outdoor gas replaces & re feature products.
Wildreoutdoorliving.com
For all your outdoor living products,
such as grills, refrigerators and accessories.
07-00038