Modern Portable jHub Elite User manual

Guide For A Great User Experience:
jHub Elite
Simple, Modern, Portable, Fast Speed
Charging For:
iPhones, Smartphones, Tablets, Cameras,
Bluetooth Speakers and much much more.
Please Visit Us At: ModernPortable.com
1 | Page

Thank you very much for purchasing the jHub
Elite Power Bank Charger by Modern Portable.
You are going to LOVE IT!
Table of Contents:
1. What’s Included?
2. Tech Specs
3. How To Charge Your jHub Elite
4. How To Charge Your Device With Your jHub Elite
5. Important Notes and More Information
2 | Page

1. What’s Included?
•The jHub Elite Power Bank Charger by Modern Portable
•A Micro USB charging cable to charge your jHub Elite
Power Bank
•Micro USB to Lightning Adapter
2. Tech Specs
Input – DC 5V / 1 Amp
Charging Port Output 1 – DC 5V / 1 Amp
Charging Port Output 2 – DC 5V / 2.1 Amp
Capacity – 8,000 mAh
Size – 152.4mm x 76.2mm x 9.525mm
Weight – 6.1 ounces
3 | Page

3. How To Charge Your jHub Elite
On the side of the jHub Elite are indicator lights for the
percentage of charge that it currently has. A blue light will
illuminate when charging. Charging time normally takes
approximately 7 to 8 hours at 1 Amp.
•Plug the provided Micro USB cable into the jHub Elite
Micro USB input port located on the side
•Insert the other end of the USB cable into either an AC
wall adaptor plugged into a wall electrical socket (Not
included but the same adapter you would normally use to
charge your smart phone) or a USB port on your laptop or
computer. (Please view images below)
4 | Page

4. How To Charge Your Device With Your jHub Elite
First press the button on the top of the jHub Elite to turn
on. The jHub Elite is engineered to charge all USB devices
(current input must be higher than 50 mA). There are two
USB output ports. Port 1 is 1 Amp port which is great for
charging smart phones along with other devices and Port 2
is 2.1 Amp which is great for charging tablets. Once your
device is plugged into the jHub Elite it will instantly begin
charging your device properly. Indicator lights will
illuminate to show what percentage of charge the jHub
Elite currently has. Once the jHub Elite has stopped
charging your device you are able to turn off the jHub Elite
by holding down the button on the top until the indicator
lights turn off. If you need to charge your jHub Elite please
follow instructions for charging the jHub Elite in Section 3.
1. Plug your USB Cable into the jHub Elite USB charging
port (either port depending on what device you are
charging)
2. Connect the other end of your cable into you device
5 | Page

5. Important Notes and More Information
•When charging your jHub Elite do not charge other devices from the
jHub Elite at the same time.
•Keep your jHub Elite out of extreme heat/cold, damp places, water and
away from flammable items
•Avoid hitting, throwing or dropping your jHub Elite
•When charging your jHub Elite, approximately 20% to 35% of the
external battery’s capacity will be consumed due to power lost from
heat produced by circuit, the conversion of the voltage and the cable
charging/your device. Industry average is currently 35% for the
efficiency rate.
•For a fully charged jHub Elite it can take up to 6 hours depending on the
output power of the customer provided wall charger. Depending on the
wall charger output power the fourth LED Power Meter light will stay
blinking. To check the current charge level unplug the jHub Elite and tap
the on/off button. The LED Power Meter lights will then illuminate and
1 LED light is 1% to 25% charged, 2 LED lights is 26% to 50% charged, 3
LED lights is 51% to 75% charged and 4 LED lights is 76% to 100% full
charged.
FAQ: Visit us at www.ModernPortable.com for all frequently asked
questions
Contact Us Email: [e-mail]
Corp Bulk Orders: [e-mail]
jHub by Modern Portable is sold in the San Francisco Bay Area and Made in China
Portable Power Bank Charger
6 | Page