modway EEI-2571 User manual

FFelt ×2
(Remarks: 2 pcs for backup use only)
bench
BENCH
EEI-2571
BENCH
Legs
E
Bolt M6×45mm ×4
Seat Frame ×1 X- ×2 Side Rail ×2
Bolt M6×35mm ×4
Spring Washer M8 ×4
Flat Washer M8 ×4
and then follow the simple step-by-step
f reach of children.

EEI-2571 BENCH
D
C
A
E
ACD E
A×2 C×2 D×2
A×2 C×2 D×2
STEP1:
Repeat the same steps for another X-Leg (2).
Do not fully tighten Bolts (A) for another X-Leg (2).
Insert 1 piece of X-Leg (2) with 2 pieces of Bolt (A), 2 pieces of Spring Washer (C), and 2 pieces
of Flat Washer (D) into the bottom of Seat Frame (1) as shown.
Do not fully tighten Bolts (A) for X-Leg (2).
E×1
E×1
STEP2:

E
EEI-2571 BENCH
B×4
B
3
1
2
E×1
STEP3: Insert 1 piece of Side Rail (3) into the X-Legs (2) as shown.
Attach by 2 pieces of Bolt (B) as shown. Repeat the same steps for another Side Rail (3).
Do not fully tighten Bolts (B) for Side Rail (3).
STEP4: Carefully turn over the chair and adjust balance of the chair.
Assembly is complete.
The bench is ready to use now!
Please put a heavy object or seat one adult on top of the Seat Frame (1) to pressure the chair for
leveling.
Fully tighten all Bolts with Allen Wrench (E).
E