modway EEI-2612 User manual

Page 1 of 3
Components:
1 Right Bumper Chaise x1 2 Seat Cushion x1
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the RIght Bumper Chaise, we recommend that it is assembled by two adults,
on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
3 Back Cushion x1
1
2
3 5
4
6
6
6 6
4 Side CushionⅠ x1 6 Leg x5 5 Side CushionⅡ x1
Frame
2 PIECE UPHOLSTERED FABRIC RIGHT FACING BUMPER SECTIONAL
Thank you for purchasing this RIGHT BUMPER CHAISE!
Before you start, here is some helpful advice:

Page 2 of 3
STEP 1:
STEP 2:
Open the Carton of Right Bumper Chaise (1).
Please find the package of 5 pieces of Legs (6) on the top of the seat. Take out 5 pieces of Leg (6) from the package.
Take off the Black Protection Cover from the Legs (6) .
Black Protection Cover
Please put Right Bumper Chaise (1) upside down on a carpeted or padded surface without Seat Cushion (2),
Back Cushion (3), and Side Cushions (4&5) as shown.
6
6
6
6
6
1
1
6
6
Insert 1 piece of Leg (6) labeled "Middle Leg" into the middle hole on the round metal plate at the middle of
Insert 1 piece of Leg (6) into the hole on the round metal plate at the corners of the Right Bumper Chaise (1).
Repeat the same steps for the remaining Legs (6)
Right Bumper Chaise (1).
“ Middle Leg"
Frame

Page 3 of 3
STEP 3:
Carefully turn over the .
Put Seat Cushion (2), Back Cushion (3), and Side Cushions (4&5) to the assembled Right Bumper Chaise (1) as shown.
1
2
4 5
3
Assembly is complete. Your Right
Bumper Chaise is ready to be used now!
Right Bumper Chaise (1).
Frame

Page 1 of 3
Components:
1 2
Thank you for purchasing the LEFT ARM LOVESEAT!
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the Left Arm Loveseat,we recommend that it is assembled by two adults,
on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
3
Left Loveseat Frame x1 4
Leg x4 Left Loveseat Seat Cushion x2 Left Loveseat Back Cushion x2
2
2
2
1
3 3
4 4

Page 2 of 3
STEP 1:
STEP 2:
Black Protection Cover
2
Please put the Left Loveseat Frame (1) upside down on a carpeted or padded surface without 2 pieces of Left Loveseat
Seat Cushion (3) and 2 pieces of Left Loveseat Back Cushion (4) as shown.
Insert 1 piece of Legs (2) into the hole on the round metal plate at the corners of the Left Loveseat Frame (1) as shown.
Use Hands to tighten the Legs (2) clockwise until secure.
Repeat the same steps for the other three Legs (2).
Open the Carton of Left Loveseat Frame (1).
Please find the package of 4 pieces of Legs (2) on the top of the seat. Take out the 4 pieces of Legs (2) from the package.
legs (2).
Take off the Black Protection Cover on the 4 pieces of
2
2
2
2
2
1
1
Clip on the bottom of Loveseat

Page 3 of 3
STEP 3:
Carefully turn over the Left Loveseat Frame (1).
Put the 2 pieces of Left Loveseat Seat Cushion (3) and 2 pieces of Back Cushion (4) on the Left Loveseat (1) as shown.
2
2
2
1
3 3
4 4
Assembly is completed. The Left Arm Loveseat is ready to enjoy now!