modway EEI-4137 User manual

EEI-4137 CHAIR
Customer Service 609-256-9000︱www.modway.com
Page 1of 2
Thank you for purchasing the MODWAY CHAIR.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the Chair, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 15 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6.Please keep all the pieces out of reach of children.
Components:
1. Chair Body x1 2. Leg x4

EEI-4137 CHAIR
Customer Service 609-256-9000︱www.modway.com
Page 2of 2
STEP 1:
1. Open the carton and take out the Chair Body (1) and 4 pieces of Legs(2).
2. Please put Chair Body (1) on a carpeted or padded surface.
3. Attach 1 piece of Leg (2) to the bottom of Chair Body (1) and tighten by hand as shown.
4. Repeat the same steps for other 3 pieces of Legs (2).
STEP 2:
Carefully turn over the assembled Chair (1) from step 1 as shown.
Assembly is complete. Your Chair is ready to enjoy now!