Monoprice Blackbird 12522 User manual

1
Blackbird™ 4K 1x2 HDMI® Splitter
Model 12522
User's Manual

2
SAFETY WARNINGS AND GUIDELINES
•This device is intended for indoor use only.
•Do not expose this device to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately disconnect it from all equipment and allow it to fully dry
before reuse.
•Do not expose this device to excessively high temperatures. Do not place it in, on,
or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct
sunlight.
•Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
•This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.
•In the event of serious operating problem, stop using the unit immediately.
•Keep away from corrosive materials.
INTRODUCTION
This Blackbird™ 4K 1x2 HDMI® Splitter allows you to view the same HDMI video content on
two displays at the same time. It supports a data bandwidth of 18Gbps, which allows it to
handle all High Speed HDMI features, including 36-bit Deep Color, 3D video, and video
resolutions up to 4K@60Hz. The splitter is powered by the HDMI bus and therefore no
external power supply is required.

3
FEATURES
•Compliant with the HDMI® 2.0 and HDCP™ 2.2/1.4 specifications
•18Gbps bandwidth
•Supports HDMI resolutions up to 4K@60Hz resolutions
•Supports 3D video
•Supports 16:10 computer resolutions up to 1920x1200p
•Supports all High Speed HDMI® features, including 36-bit Deep Color and high-
definition multichannel uncompressed audio
•HDMI bus powered - requires no external power
•Gold plated connectors
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com or via email at su[email protected]. Check the website for
support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x 4K 1x2 HDMI® splitter
1x User's manual

4
PRODUCT OVERVIEW
LINK LEDs: These LEDs illuminate whenever a video display is connected to the output and
video content is being played.
INPUT LED: This LED illuminates whenever a connected HDMI® source is playing video
content.
HDMI OUTPUTS: Connect HDMI video displays to these two outputs using Premium High
Speed HDMI Cables (not included).
POWER: Normally, the splitter draws sufficient power from the HDMI bus. However, if you
are experiencing transmission difficulties, you can connect a USB power source,
such as a wall charger (not included).
HDMI INPUT: Plug the HDMI input lead into the HDMI output of your video source device.

5
CONNECTION
1. Ensure that all devices that will be connected are powered off and unplugged from
their power sources.
2. Using a Premium High Speed HDMI® Cable (not included), plug one end into the
HDMI input on your first display, then plug the other end into the HDMI OUTPUT 1
port on the splitter.
3. Using a Premium High Speed HDMI Cable (not included), plug one end into the
HDMI input on your second display, then plug the other end into the HDMI OUTPUT
2port on the splitter.
4. Plug the HDMI INPUT lead into the HDMI output port on your HDMI video source
device.
5. Plug in and power on all connected devices, then start video playback on your
HDMI video source device.
6. Check the splitter and verify that each LED is illuminated. Check each display to
verify that the video content is properly displayed.
Congratulations, you have successfully installed your new HDMI splitter!

6
TROUBLESHOOTING
Q1: No video on either display.
A1: Verify that the video source is powered on and playing video content. Verify that the
HDMI INPUT lead is fully seated into the HDMI output of your source device. Check
the splitter and verify that the INPUT LED is illuminated. Try connecting a USB power
source, such as a wall charger (not included).
Q2: No video on one display, but video is present on the other display.
A2: Verify that the display is powered on and that the proper HDMI input is selected.
Check the HDMI cable connections at each end to verify that they are fully seated in
the HDMI connectors. Try swapping out the HDMI cable with a known good one.
Q3: 1080p@60Hz and 4K@30Hz video display properly, but 4K@60Hz video does not.
A3: Ensure that you are using a Premium High Speed HDMI Cable that supports 18Gbps
bandwidth.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
or through email by sending a message to [e-mail]. Check the website for
support times and links.

7
SPECIFICATIONS
Model
15252
Input
1x HDMI®
Outputs
2x HDMI
Bandwidth
600MHz per channel, 1.8GHz total
Data Throughput
18Gbps
Supported 4:3 Resolutions
480i, 480p, 576i, 576p
Supported 16:9 Resolutions
720p, 1080i, 1080p, 4K (3840x2160p)
Maximum 16:10 Resolution
1920x1200p
Power Source
HDMI bus power, optional USB power source
(not included)
Operating Temperature
+32 ~ +104°F (0 ~ +40°C)
Storage Temperature
-4 ~ +140°F (-20 ~ +60°C)
Operating Humidity
20 ~ 90% RH, noncondensing
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Modifying the equipment without Monoprice's authorization may result in the equipment
no longer complying with FCC requirements for Class B digital devices. In that event, your

8
right to use the equipment may be limited by FCC regulations, and you may be required to
correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Blackbird™ is a trademark of Monoprice Inc.
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
HDCP™ is a trademark of Digital Content Protection LLC.