Monoprice Blackbird User manual

Blackbird™4K Pro 1x2 HDMI® Splitter
P/N 15258
User's Manual

2
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
This device is intended for indoor use only.
Do not expose this device to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately unplug it from the power outlet and allow it to fully dry
before reapplying power.
Do not touch the device, the power cord, or any other connected cables with wet
hands.
Do not subject the product to extreme force, shock, or fluctuations in temperature
or humidity.
Before plugging the unit into a power outlet, ensure that the outlet provides the
same type and level of power required by the device.
Prior to operation, check the unit and power cord for physical damage. Do not use if
physical damage has occurred.
Unplug this device from the power source when not in use.
Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.
Ensure that power is turned off and disconnected before making any electrical
connections.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.

3
INTRODUCTION
This Blackbird™ 4K Pro 1x2 HDMI® Splitter allows you to connect two HDMI displays to a
single HDMI video source. It delivers 18 Gbps bandwidth and supports video resolutions up
to 4K@60Hz with 24-bit RGB/YCbCr 4:4:4 color space. It is compliant with the HDMI 2.0b
and HDCP 2.2 specifications and supports high-resolution, multichannel audio, including 7.1
channel LPCM, Dolby TrueHD™, and DTS-HD Master Audio™.
FEATURES
Compliant with the HDMI 2.0b and HDCP 2.2 specifications
Delivers 18 Gbps bandwidth
Supports video resolutions up to 4K@60Hz with 24-bit RGB/YCbCr 4:4:4 color space
Supports 3D frame sequential formats up to 1080p@60Hz and 4K@30Hz
Supports 7.1 channel LPCM, Dolby TrueHD™, and DTS-HD Master Audio™
Supports high resolution VESA mode video formats up to QSXGA@60Hz
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-
6pm PT) or via email at [email protected]

4
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x Blackbird 4K Pro 1x2 HDMI® splitter
1x AC power adapter
1x User's manual
PRODUCT OVERVIEW
Front Panel
POWER: The LED illuminates when power is applied.
IN: The LED illuminates when a video source device is connected.
OUT 1: The LED illuminates when an active HDMI® display is connected to the HDMI OUT 1
connector.
OUT 2: The LED illuminates when an active HDMI display is connected to the HDMI OUT 2
connector.
EDID: The EDID switch determines how the video source device gets its EDID information.
When set to the STD position, the splitter will transmit its built-in EDID settings of
1080p@60Hz with 2-channel LPCM audio to the source device. When set to the TV
position, the splitter will read the EDID settings of the display connected to HDMI
OUT 1 and will transmit that information to the source device.

5
Rear Panel
HDMI OUT 1: HDMI® connector for connecting an HDMI display.
HDMI OUT 2: HDMI connector for connecting an HDMI display.
HDMI IN: HDMI connector for connecting an HDMI video source device.
DC 5V: DC barrel connector for connecting the included AC power adapter.
EDID SETTINGS
The EDID switch on the front panel allows you to determine which EDID information the
splitter will transmit to the video source device. When set to the STD position, the splitter
will transmit its built-in EDID settings of 1080p@60Hz with 2-channel LPCM audio to the
source device. When set to the TV position, the splitter will read the EDID settings of the
display connected to HDMI OUT 1 and will transmit that information to the source device.
If both of your displays are identical, it does not matter which display is connected to the
HDMI OUT 1 port. However, if the two displays have different maximum resolutions, the
display with the lowest maximum resolution should be connected to the HDMI OUT 1
connector.
INSTALLATION
1. Ensure that all equipment to be connected is powered off and unplugged from its
power source.
2. Place or mount the splitter in its intended location.

6
3. Using a High Speed HDMI® Cable (not included), plug one end into the HDMI input
on your displays, then plug the other end HDMI OUT 1 connector on the splitter.
4. Using a High Speed HDMI Cable (not included), plug one end into the HDMI input
on your displays, then plug the other end HDMI OUT 2 connector on the splitter.
5. Using a High Speed HDMI Cable (not included), plug one end into the HDMI IN
connector on the splitter, then plug the other end into the HDMI output on your
video source device.
6. Place the EDID switch in the desired position. Refer to the EDID SETTINGS section
above for guidance in setting the EDID switch.
7. Plug the DC barrel connector on the included AC power adapter into the DC 5V
connector on the splitter, then plug the adapter into a nearby AC power outlet.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to [e-mail]

7
SPECIFICATIONS
Model
15258
Inputs
1x HDMI®
Outputs
2x HDMI
Maximum Resolution
4K@60Hz
Supported Color Spaces
24-bit RGB/YCbCr 4:4:4
Video Bandwidth
18 Gbps
Input Power
5 VDC, 1A
AC Adapter Input Power
100 ~ 240 VAC, 50/60 Hz
Maximum Power Consumption
2 watts
Operating Temperature
+32 ~ +104°F (0 ~ +40°C)
Storage Temperature
-4 ~ +140°F (-20 ~ +60°C)
Operating Humidity
20 ~ 90% RH, non-condensing
Dimensions
2.2" x 3.9" x 0.6" (56 x 100 x 16 mm)
Weight
5.8 oz. (165 g)
Certifications
CE, FCC, UL
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories. Dolby
Pro Logic™ and Dolby TrueHD™ are trademarks of Dolby Laboratories.
DTS® is a registered trademark and the DTS logos, Symbol, DTS-HD™, and DTS-HD Master
Audio™ are trademarks of DTS, Inc.