Monoprice HSP-102M User manual

SPECIFICATIONS
Video Amplifier Bandwidth 2.25Gbps
Input Video Signal .., 1.3Vp-pMax
Input Connector Type HDMI 19 pin
Output Connector Type HDMI 19 pin
Power Consumption 6W Max
Power Supply 6VDC, 1A
Dimensions (LxWxH) mm 80x51.5x20
Product Weight 80g
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
MONOPRICE warrants the equipment it manufactures to be free from defects in material
and workmanship for the following limited warranty period:
Twelve (12) months parts and labor
If equipment fails because of such defects and MONOPRICE is notified within twelve (12)
months from the date of shipment, MONOPRICE will, at its option, repair or replace the
equipment, provided that the equipment has not been subjected to mechanical, electrical,
or other abuse or modifications-
Equipment that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the repair. Such repairs are warranted for
ninety (90) days from the day of reshipment to the buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
[imitation, any implied warranty or merchantability or fitness for any particular purpose, all
of which are expressly disclaimed.
The information in this manual has been carefully checked and is believed to be
accurate. However, MONOPRICE assumes no responsibility for any inaccuracies that may
be contained in this manual. In no event wilf MONOPRICE, be liable for direct, indirect,
special, incidental, or consequential damages resulting from any defect or omission in this
manual, even if advised of the possibility of such damages, The technical information
contained herein regarding HDMI switcher features and specifications is subject to
change without notice.
OWNERS MANUAL
H5P-10EM
1 input, 2 output HDMI Splitter
Note:
Mount the splitter away from sources of electromagnetic or radio frequency
interference, and also away from heat and moisture.
To ensure optimum performance, you should use MONOPRICE's high quality
cables with this product.

H5P-10EM
1 input, 2 output HDMI Splitter
Thank you for your purchase of the MONOPRICE HDMI Splitter. We always strive to
offer the finest quality product at the best possible price. Your complete satisfaction is
important to us.
The HDMI Splitter is designed to make your HDTV experience more comfortable,
productive and less expensive. The HDMl Splitter offers solutions for Home Theater, A/V
installations, bars and pubs, schools and corporate training environments.
The HDMI Splitter sends the same video output to two HDTV digital screens. It is a flexible
solution that accommodates multiple displays. Simply connect your HDTV displays to the
splitter's display output. The HDMl Splitter will equalize the HDMI signal as well as support
long length cable applications.
Features and Characteristics
Connect one HDMI sources to up to two HDTV display devices
Maintains 480i, 480p, 720p, 1080i and 1080p resolutions
Maintains highest HDMI single link video resolution and digital audio signal
Supports HDCP compfiant devices
HDMI or DVl-HDMI cables are used to connect to the input and splitter outputs
Active output channels are displayed on the front panel LED's, which are
automatically activated when a cable Is connected to the corresponding output.
Can be connected in series with a MONOPRICE HDTV HDMI switcher for
connection of multiple sources to multiple display devices.
Front Panel
Installation
From HDMI
enabled Source
Power In
Rear
Panel
To HDMI enabled
Display Devices
To HDMI enabled
Display Devices
Current Output
Indicator
Package Contents
EtxHDMI 1X2 splitter
01x 6VDC 1A power supply
EHx User Manual
Connecting the HDMI Splitter
<=$ You can mount the splitter on a flat horizontal surface.
O Connect the HDMi cables from the HDTV sources into the HDMf Splitter inputs.
<=> Connect the cable from your display (monitor or projector) into the HDMl outputs of the
HDMI Splitter.
^ Plug the 6VDC power supply into the HDMl Splitter.
Note: When adding mc^e output ports to an existing working configuration, it might
be necessary to Hush the "Reset" button on the Splitter to activate the new
port.