Morphy Richards IB22011 User manual

Instructions
‘Flat Mates’ Salon professional straightener
‘Flat Mates’ Salon professional straightener with
interchangeable plates
Model 22011 for catwalk control
Model 22014 with attachments

Thank you for buying your new Morphy Richards, Mark Hill professional hair straightener.
Please read these instructions carefully before use and keep in a safe place for future
reference.
Key Features
2
Power on
indicator light
3 heat settings for
fine, medium, thick hair
Plate release button
model 22014 only
Includes
• Anodised styling plates to care for your hair and create longer lasting style
• 3 metre salon length cable for flexibility and ease of use
• Finger grips to make styling easier
• 4 sectioning clips, to make styling easier and hassle free
Crimping & Box Crimping plates with model 22014 only
Straightener plates
Crimping plates Box crimping plates
Finger grips
to make styling easy

Styling tips
Having shampooed your hair, ensure
that it is rinsed properly as shampoo that is
left in the hair will leave it looking dull.
To maximise shine, rinse your hair in
cool water thoroughly.
Comb your hair through with a wide
toothed comb to remove tangles before
styling.
Dry your hair thoroughly using a Morphy
Richards Hairdryer. By drying your hair
thoroughly before using the straightener you
will avoid creating frizz.
Styling
Choose the heat setting relevant for
your hair type. Divide your hair into styling
sections, brushing each section through
thoroughly.
Clamp a section of the hair between the
straightening plates as close to the roots as
possible, gently and slowly pull the
straightener down your hair shaft to the end.
If you need to straighten a section further,
allow to cool and then smooth again.
3
anodised straightening plates have been
designed to stop your hair from sticking to
the plates.
To change the
styling plates (model 22014 only)
Your styler has 3 interchangeable styling
plates. To change the plates press the
release button and unclip the fitted plates
and slide the plates from the heater unit.
To refit plates simply slide onto the unit
and click into place.
Always unplug the unit and allow to cool
before removing or fitting new plates.
Crimping &
Box crimping plates
Choose the heat setting that most suits
your hair.
Clamp a section of the hair as close to
the root as possible and slowly move the
crimper down the length of the hair. Repeat
on all sections of the hair.

Important Safeguards
When using your hair appliance, basic
safety precautions should always be
followed.
1Read all instructions carefully.
2Use the appliance for its intended
use only.
3To protect against the risk of
electric shock, do not immerse the
appliance in water or in any other
liquids.
4It is recommended that this
appliance should not be used by
children.
5Be sure that your household
voltage corresponds to the voltage
marked on the styler.
6Always unplug your appliance
when it is not in use.
4
7Do not leave the straightener
switched on whilst unattended.
8Do not take this product into a
bathroom or use near a water
basin.
9In the event of cable damage do not
attempt to replace the mains cable,
return to morphy richards.
10 After use do not store until the
product has cooled down.
11 Do not place the styler on surfaces
likely to be easily damaged by the heat.

Wiring
This product is fitted with a 13A (BS1363)
plug. A 3 amp fuse (BS1362) must be used.
Check that the voltage on the rating plate of
your appliance corresponds with your
house electricity supply which must be A.C.
(Alternating Current).
If the socket outlets in your home are not
suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.
IMPORTANT : THE PLUG REMOVED
FROM THE MAINS LEAD, IF SEVERED,
MUST BE DESTROYED AS A PLUG WITH
BARED FLEXIBLE CORD IS HAZARDOUS
IF ENGAGED INTO A LIVE SOCKET
OUTLET.
Mains Lead
As a safety precaution and to prolong the life
ofyourappliance,donotwrapthemainslead
around the appliance as this will cause
damage.
5

Morphy Richards products are intended for household use only. Morphy Richards has a policy of
continuous improvement in product quality and design. The Company, therefore, reserves the right to
change the specification of its models at any time.
446/8001/49 Rev 1
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
Two Year Guarantee
It is in your interest to retain the retailers receipt as proof of purchase. Please quote the model
number if the product develops a fault. This number can be found on the handle of the product.
All Morphy Richards products are individually tested before leaving the factory. In the unlikely
event of any appliance proving to be faulty within 28 days of purchase it should be returned to the
place of purchase for it to be replaced.
If a fault develops after 28 days and within 24 months of original purchase, you should contact the
helpline number quoting the model number of the product, or write to the address below. You will
be asked to return the product (in secure packaging) to the address below along with a copy of
proof of purchase.
The After Sales Division
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK (local rate) 08450 777700,
Republic of Ireland 1800 409119
Morphy Richards Website www.morphyrichards.co.uk