SAFETY INFORMATION:
When using your hair appliance, basic safety
precautions should always be followed. Please read
these instructions carefully before using the product,
and keep them in a safe place for future reference.
nn
1This tong is professional standard, and reaches very
high temperatures. Always be careful not to allow
the barrel to come into contact with the skin, and
use the heat protection stand to avoid causing
damage to surfaces.
nn
2Do not leave the barrel in contact with the hair for
more than a few seconds. The tong reaches very
high temperatures, so there is no need to leave the
hair around the barrel for longer than a few
seconds. This will avoid unnecessary damage to the
hair cuticle.
nn
3Use the appliance for its intended use only.
nn
4To protect against the risk of electric shock, do not
immerse the appliance in water or any other
liquids.
nn
5It is recommended that this appliance should not be
used by children.
nn
6Always unplug your appliance when it is not in use.
nn
7Do not leave the tong switched on while
unattended.
nn
8Do not take this product into a bathroom, or use
near water.
nn
9In the event of cable damage, do not attempt to
replace the mains cable – return to Morphy
Richards.
nn
10After use, do not store until the product has cooled
down.
nn
11 Do not place the tong on surfaces likely to be
damaged by the heat. Always use the safety stand.
WIRING:
This product is fitted with a 13A (BS1363) plug. A 3
amp fuse (BS1362) must be used. Check the voltage on
the rating plate of your appliance corresponds with your
house electricity supply which must be AC (Alternating
current). If the socket outlets in your home are not
suitable for the plug supplied with this appliance the
plug should be removed and an appropriate one fitted.
IMPORTANT: THE PLUG REMOVED FROM THE MAINS
LEAD, IF SEVERED MUST BE DESTROYED AS A PLUG
WITH BARED FLEXIBLE CORD IS HAZARDOUS IF
ENGAGED INTO A LIVE SOCKET OUTLET.
MAINS LEAD:
As a safety precaution and to prolong the life of your
appliance, do not wrap the mains lead around the
appliance as this will cause damage.
HOW TO USE YOUR:
TONG:
nn
1Switch the on/off switch to use. The red light will
illuminate.
nn
2Rest the tong on the heat protection stand while
heating, in order to avoid scorching or burning
surfaces.
nn
3Once the tong has reached a temperature
suitable for use, the light will begin to flash. This
usually takes less than 2 minutes.
!Ensure your hair is thoroughly dry before you
begin styling – this will avoid damage to the
hair.
nn
4Divide your hair into sections, brushing each
section thoroughly. Use small sections of hair for
tighter more defined curls, and larger sections
for softer larger curls.
nn
5Raise the tong by pressing the tong lever. Place
the outer section of the hair between the lever
and the barrel. Lower the lever to trap the end of
the hair. Rotate the handle to wind the hair
round the outside of the tong. You may find it
easier to hold the finger grip loosely with your
other hand.
nn
6Leave the tong in place for about 10-15
seconds, depending on the length and thickness
of your hair. Unwind the hair carefully, and raise
the tong lever to release the hair. For best results
secure the curl to the head with a grip until you
have completed all sections. Leave in place to
cool, and then run your fingers gently through
the curl to soften the finish.
nn
7Repeat on all sections of the hair.
TONG
LEVER
COOL TOUCH
FINGER GRIP
HANDLE
HEAT
PROTECTION
STAND
TONG
BARREL
ON/OFF
SWITCH
INDICATOR
LIGHT
CLEANING:
It is normal to find build up of hair products on the
tong barrel. In order to avoid this you should clean
your tong regularly. Always wait for the barrel to
cool down thoroughly before cleaning. Use a damp
cloth to remove any build up. If this fails to clean
the barrel, try a non abrasive cleaning wipe e.g. CIF.
2-YEAR GUARANTEE:
It is in your interest to retain the retailers receipt as
proof of purchase. Please quote the model number if
the product develops a fault. This number can be
found on the handle of the product.
All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of
any appliance proving to be faulty within 28 days of
purchase it should be returned to the place of
purchase for it to be replaced.
If a fault develops after 28 days and within 24
months of original purchase, you should contact the
helpline number quoting the model number of the
product, or write to the address below. You will be
asked to return the product (in secure packaging) to
the address below along with a copy of proof of
purchase:
The After Sales Division,
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
