Morphy Richards IB22074 Product information sheet

2-year Guarantee It is in your interest to retain the retailer’s receipt as proof of purchase. Please quote the model number if the product develops a fault. This number can be found on the handle of the product. All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced. If a fault develops after 28 days and within 24 months of original purchase, you should contact the helpline number quoting the model number of the product, or write to the address below. You will be asked to return the product (in secure packaging) along with a copy of proof of purchase: The After Sales Division Morphy Richards Ltd Mexborough South Yorkshire England S64 8AJ
Helpline 8.30-5.00 Monday-Thursday 8.30-4.00 Friday UK 0870 060 2614 Republic of Ireland 1800 409119 For details of the rest of the products in the Morphy Richards range please see our website www.morphyrichards.com Registered address: Morphy Richards Ltd Talbot Road Mexborough South Yorkshire S64 8AJ Model Number: 22074 Part Number: PC22074 M UK rev1
Morphy Richards products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and
design. The company therefore reserves the right to
change the specification of its models at any time.
RetroCeramic Straightener Model No. 22074 Instructions and Guarantee

RetroCeramic Straightener
Using your straightener After washing your hair, it’s really important to prepare it for styling. If you use lots of heated styling tools on your hair always use a heat protection spray before you begin styling. Always dry the excess water from your
hair using a towel, and then use a widetooth comb to
detangle and smooth your hair. Use your hair dryer until your hair is thoroughly dry.
Applying high temperatures to damp or wet hair will increase the probability of hair breaking or becoming permanently damaged. Divide your hair into sections and comb each section thoroughly. Slide the On/Off switch to turn your straightener on. The red light will illuminate to show your straightener
is turned on. Clamp a section of the hair between the straightening plates as close to the roots as possible. Gently slide the straightener down your hair shaft to the ends. For more difficult sections of hair, you may need to do this again. Repeat on all sections of the hair. There is no need to leave the hair between the plates for longer than a few seconds. This will avoid unnecessary damage to the hair cuticle.
Your straightener reaches a very hot temperature really quickly, so be careful not to leave your straightener on surfaces like carpets, which could get damaged.
Don’t forget – to switch off your straightener and store when you have finished straightening.
If you want to store your straightener in the gift box,
always make sure your straightener has cooled down. Wiring This product is fitted with a 13 amp (BS1363) plug. A 13 amp fuse (BS1362) must be used. If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted. WARNING: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet.
Mains lead. As a safety precaution and to prolong the life of your appliance, do not wrap the mains lead around the appliance as this can cause damage. Cleaning your straighteners Over time, you may find a natural build up on your straightening plates. This can be caused by natural oils in your hair and styling products. In order to avoid this you should clean your straightener regularly. Always switch your straightener off and wait for it to cool down. Wipe with a damp cloth, or a non abrasive cleaning wipe. Failure to do this may mean the build up becomes burnt onto the plates and it will become difficult to clean. If your straightening plates do become discoloured it will NOT affect its performance. Safety information When using your hair straightener, basic safety precautions should always be followed. Please read these instructions carefully before using the product and keep them in a safe place for future reference.
1Use this appliance for its intended use only. 2To protect against the risk of electric shock, do not
immerse the appliance in water or any other liquids.
3This appliance is not intended for use by children or
other persons without assistance or supervision, if their physical, sensory or mental capabilities prevent them from using it safely. Keep out of reach of children at all times.
4Always unplug the appliance when it is not in use. 5Do not leave the appliance switched on
while unattended.
6Check that the voltage on the rating plate of the
straightener corresponds with your house electricity supply which must be AC (alternating current).
7In the event of cable damage, do not attempt to replace
the mains cable – return to Morphy Richards.
8After use, do not store until the product has
cooled down.
9Do not use this appliance near bathtubs, showers, basins
or other vessels containing water.
10 This straightener is professional standard, and reaches
very high temperatures. Always be careful not to allow the plates to come into contact with the skin.
11 Do not place the straightener on surfaces likely
to be damaged by the heat.