morse Hydra-Lift 400A-60 User manual

MORSE Mfg. Co., Inc. •727 West Manlius Street •P.O. Box 518 •East Syracuse, NY 13057-0518
Phone: [phone] •Fax: [phone] •Email: [email protected] •Website: www.morsedrum.com
Copyright 2009 - Morse Mfg. Co., Inc. Form PL400-60 (0604-0309) (Updated 10/2009) Page 1
The Specialist In Drum Handling Equipment
Model 400A-60
Hydra-Lift, 60”, Manual Lift, Manual Tilt
CONTENTS
Page
Receiving Procedures. . . . . . . . . . . . . . . . . 1
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2
Machine Description. . . . . . . . . . . . . . . . . . . 3 - 4
Assembly Instructions. . . . . . . . . . . . 5
Operating Instructions. . . . . . . . . . . . . . . . . . . 6
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . 7
Parts Lists and Diagrams. . . . . . . . . . . 8 - 11
Safety Information
While Morse Manufacturing Co. drum handling equipment is engi-
neered for safety and efciency, a high degree of responsibility must
be placed upon the machine operator to follow safe practices, based
primarily on common sense, upon which true safety depends.
Failure to follow the safety precautions in this manual can result in
personal injury or property damage. Observe the same precautions as
with similar machinery where carelessness in operating or maintenance
is hazardous to personnel. Carefully read the safety precautions below
and throughout this manual.
Receiving Procedures
Every Morse drum handler is inspected prior to shipping. However,
damage may be incurred during transit.
• Check for visible damage. If you choose to accept damaged freight,
always sign noting the damage on the BILL OF LADING.
• Document the damage and have the truck driver sign. We recommend
keeping a digital camera at your receiving dock for this purpose.
• Open packages expeditiously to check the condition of the goods.
There is only a 24 hour window to notify the carrier of any concealed
damage.
• IMMEDIATELY REPORT ALL DAMAGE TO THE SHIPPING COM-
PANY! Then you may contact Morse for assistance with your freight
claim.
• Morse Manufacturing will not be held responsible for any damaged
freight that is not signed for as damaged.
Delivery to non-business addresses without a loading dock result in
additional freight charges. Residential delivery fees, inside delivery
fees, re-delivery charges, and lift gate services will be added by the
truck line, and are non-negotiable.
Limited 2 Year Warranty
Morse drum handling equipment is guaranteed against defects in
workmanship or materials for TWO YEARS when used properly within
its rated capacity. Warranty does not cover wear from normal use or
damage from accident or abuse. Motors and other purchased parts
carry the warranties of their manufacturers.
For warranty claims, contact your Morse Dealer to obtain a return au-
thorization number, and for return freight advice. Return freight must
be prepaid.
In all instances, liability is limited to the purchase price paid or to
repairing or replacing the product. Customer assumes liability for any
modications, unauthorized repairs or parts substitution.
Operator’s Manual
for Morse Hydra-Lift Drum Karrier
Model 400A-60
Serial Number 0604 to 0309 (MMYY)

Safety Information (continued)
DANGER - Indicates a situation which, if not avoided, will result in
serious injury or death. This signal word is limited to the most extreme
situations.
WARNING - Indicates a situation which, if not avoided, could result in
serious injury or death.
CAUTION - Indicates a situation which, if not avoided, can result in
damage to the machine.
CAUTION – Do Not Transport with Drum Raised
ALWAYS LOWER THE DRUM HOLDER TO LOWEST POSITION BEFORE TRANSPORTING. The unit
can become unstable when transporting with a raised load.
DANGER - Stay Clear of Power Lines
KEEP WELL CLEAR OF POWER LINES. Never approach a power line. Current in a high voltage line
may arc some distance from the wire to the steel framed, grounded machine.
WARNING
The Hydra-Lift Karrier is designed to handle one drum of the types listed at the top of page 3, under 2.
Machine Description. DO NOT attempt to handle any other type of drum or object. DO NOT exceed
the weight capacity of 800 Lb.
WARNING - Level Floors Only
For operation only on clean, level oors of suitable bearing capacity. Do not use on sloped surfaces,
ramps, irregular or debris strewn oors.
WARNING - Do Not Modify the Unit
Under no circumstances should any modications be made to the Morse machinery without factory
authorization. Any modications may void the warranty. This machine was designed to perform a specic
job and alterations may result in injury to operator or machine.
WARNING - No Loose Fitting Clothing
Wear close-tting clothing and safety equipment appropriate to the job. Loose tting clothing may
become caught on the machinery and cause severe personal injury.
WARNING - Hydraulic Fluid Under Pressure Can Be Hazardous
Escaping hydraulic uid under pressure can penetrate the skin, causing serious injury. Avoid the hazard
by relieving pressure before disconnecting hydraulic lines. Keep hands and body away from pinholes
and nozzles, which eject uid under high pressure. Use a piece of cardboard to search for leaks. If an
accident occurs, see a doctor immediately and inform them of the nature of the accident.
CAUTION - Wear Safety Shoes
Wear safety shoes with non-slip soles and hard toe protection.
Copyright 2009 - Morse Mfg. Co., Inc. Form PL400-60 (0604-0309) (Updated 10/2009) Page 2
Operator’s Manual for Morse Hydra-Lift Drum Karrier Model 400A-60
Serial Number 0604 to 0309 (MMYY)
The Specialist In Drum Handling Equipment
Model 400A-60
Hydra-Lift, 60”, Manual Lift, Manual Tilt

Copyright 2009 - Morse Mfg. Co., Inc. Form PL400-60 (0604-0309) (Updated 10/2009) Page 3
Machine Description
The Model 400A-60 Hydra-Lift Karrier will pour a drum up to 60” high, measured from the oor to the lowest point of a
horizontal drum. It is designed to lift, transport, and dispense a ribbed 55-gallon steel drum 22.5” in diameter.
A smaller diameter drum can be handled with the correct size 55/30 Series Diameter Adaptor installed
(see Diameter Adaptor literature)
A 55-gallon plastic drum can be handled if the unit is equipped with an Adjustable Bracket (Option APS) or Top Rim Clamp
(Option ARC)
(see plastic drum option manual).
The maximum full-drum capacity is 800 Lb. The capacity is derated to 500 Lb. for a half-full drum. The half-full rating is based
on the tilt mechanism’s capacity for handling an unbalanced bottom-heavy drum.
Controls
The Morse Hydra-Lift Karrier is manually propelled and
steered.
There are two functions for the operator to control (Figure
2.1):
1. “LIFT” and lower function for vertical positioning of the
drum
2. “TILT” function to control the degree of rotation of the
drum
1. LIFT and Lower Function
To raise the drum
a. Insert pump lever handle into pump socket.
b. With the release valve closed, begin to pump the lever
handle. The drum will lift.
To lower the drum
a. Open the release valve slowly, a part of a turn. Allow the
drum to descend at a controlled rate. The valve may be
reclosed to hold the drum at any height.
2. TILT Function
To tilt the drum
a. Turn the hand crank (item 90) to turn the drum.
b. Before releasing your grip on the hand crank, pull out
the crank stop pin (item 89) to block the hand crank from
spinning freely.
c. If the drum handler is equipped with the MORStop Tilt-
Brake, there is no need to use the stop pin. Braking is
immediate and self-actuating, without additional steps by
the operator.
Note: To add the MORStop Tilt-Brake to an existing drum
handler, order part # 3900-P for a eld installation kit.
Operator’s Manual for Morse Hydra-Lift Drum Karrier Model 400A-60
Serial Number 0604 to 0309 (MMYY)
Figure 2.1
The Specialist In Drum Handling Equipment
Model 400A-60
Hydra-Lift, 60”, Manual Lift, Manual Tilt

Copyright 2009 - Morse Mfg. Co., Inc. Form PL400-60 (0604-0309) (Updated 10/2009) Page 4
WARNING - Watch Out for Pinch Points
Stay clear of moving parts. Operator should remain behind the push handle during the lift operation.
Floor Lock
The screw-down oor lock is located on the base of the tower
(gure 3.1). Turning the oor lock clockwise until it locks in the
down position activates the oor lock. When the oor lock is
activated it prevents unwanted free wheeling of the unit. Floor
conditions determine the effectiveness of the oor lock. The
operator should verify its holding action before depending on
it to hold.
Drum Holder Assembly
The drum holder assembly (or “saddle assembly”) is the compo-
nent on the Hydra-Lift Karrier that is intended to hold the drum.
The drum holder assembly is designed to secure a standard
ribbed 55-gallon steel drum around it’s middle using a cinch
chain and ratchet tightening system. The drum holder accepts
accessories for handling smaller diameter drums.
Operator’s Manual for Morse Hydra-Lift Drum Karrier Model 400A-60
Serial Number 0604 to 0309 (MMYY)
Figure 3.1
The Specialist In Drum Handling Equipment
Model 400A-60
Hydra-Lift, 60”, Manual Lift, Manual Tilt

Copyright 2009 - Morse Mfg. Co., Inc. Form PL400-60 (0604-0309) (Updated 10/2009) Page 5
Assembly Instructions for Morse Hydra-Lift Drum Karrier Model 400A-60
Serial Number 0604 to 0309 (MMYY)
Step #1: Place tower on oor, push-handle down. See gure 1.
Step #2: Attach each leg (item 4) using two 3/8-16x3” grade 5 bolts
(item 2), at washers (item 3), and lock nuts (item 13) as
shown. Wheels should be parallel when assembled properly.
See gures 1 & 2.










 
 
 
 



 
The Specialist In Drum Handling Equipment
Model 400A-60
Hydra-Lift, 60”, Manual Lift, Manual Tilt