Question 3: How to add water?
1. Fill clean water into the measurement cup up to the marking no more
than 9.46OZ(280ML)
2. Fill in the water into the boiler with the funnel without exceeding
9.46OZ(280ML) of water.
3. Plug the safety cap firmly by clockwise rotating.
Question 4: Why did the accessories parts fall off during cleaning
after being stuck in?
Question 5: Does the steam cleaner not stressful enough when using?
1. Please let the alignment of accessories focus to the product bayonet.
2. Push in the accessories part you need to clean.
3. Twist it to the left side.
4. After, you can enjoy your steam cleaner with accessories fully twisted in.
FAQ
4
First of all, please check whether the safety cap is tight, if it is not tight, it may
cause insufficient pressure. And we do not recommend customer using the
steam cleaner without tightening or it may get burned.
Question 6: After attach the accessories and add water into the water
tank and heat up to use, the steam cleaner is air leak, why this happen?
In this case, please press the" ON/OFF" Button firstly, after pressing once, the
air leak issue will disappear so it can be used. If you still have this situation
after pressing, please contact our after sale customer service E-mail:
