Motorola MBP16 User manual

User’s Guide
MBP16
Baby Monitor
The features described in this user's
guide are subject to modifications
without prior notice.

Welcome...
to your new Motorola Baby Monitor!
Thank you for purchasing the MBP16. Now you can hear your baby sleeping in the other room.
Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you
will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for
warranty coverage.
For product-related questions, please call:
UK 0845 218 0890
On the Web: www.motorola.com
This User's Guide provides you with all the information you need to get the
most from your product.
Before you can use the baby monitor, we recommend you insert and fully
charge the battery in the parent unit, so that it continues to work if you
disconnect it from the mains power to carry it to another location. Please read
the Safety Instructions on page 8 before you install the units.
Got everything?
• 1 x Parent unit
• 1 x Baby unit
• 1 x Rechargeable Ni-MH battery pack for the Parent unit
• 1 x Power adapter for the Parent unit
• 1 x Power adapter for the Baby unit
ROI 08187 62092

Overview of your Parent unit
8
9
10
7
6
5
4
3
2
1
1 Sound Level LED
3 GREEN and 2 RED LEDs turn on and off in real
time to indicate the noise level in baby's room.
When audio is being picked up by microphone of
baby unit, the LEDs light up to in indicate audio level
with reference to the sensitivity setting. The more
LEDs light up, the stronger the sound is.
room does not exceed the thresholds set through the
parent unit.
The LEDs are also used for indicating the speaker
volume setting on parent unit. The louder you set the
speaker volume, the more LEDs light up.
2 LCD Display
3 Link Indicator
On when the parent unit is powered on and linked to
the baby unit.
Flashes when the parent unit is out of range from
baby unit.
Off when the parent unit is powered off.
4 Up / Volume +
In idle mode: Press to increase the speaker volume.
In menu mode: Press to view the previous menu item.
5 Back
In menu mode: Press to cancel settings and back to
the previous level.
If no LED lights up it means the sound level in baby's

Parent Unit Display 6 Down / Volume -
In idle mode: Press to decrease the speaker volume.
In menu mode: Press to view the next menu item.
7Talk
In idle or menu mode: Press and hold to talk back
with baby unit. Release to quit the talk mode.
8Menu/OK
In idle mode: Press to access the main menu.
In menu mode: Press to access the sub-menu, or
confirm the settings.
9Power
In idle or menu mode: Press and hold to power on/off
the parent unit.
10 Charging Indicator
On steadily when in charging mode.
Flashes when low battery is detected.
NOTE
Off even if connected with power adapter but without
battery pack installed.
Icons Behaviors Description
On when parent unit is linked and in the valid
range of baby unit.
Flashes when no link or out of range.
On when night light is enabled.
Off when night light is disabled.
On when lullaby is playing.
On when the speaker volume is turned off.
Off when the speaker volume is turned on.
On when sound alert is enabled.
Flashes when sound alert is triggered.
Battery empty, needs to be charged.
1/3 battery level.
2/3 battery level.
Full battery level.
Animation in cycle. Battery is in charging.

Menu Structure of Parent Unit
Overview of your Baby unit
MAIN MENU LANGUAGE SOUND ALERT NIGHTLIGHT RESET
SUB MENU ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
PORTUGUÊS
ON? (if the current setting is off)
or
OFF? (if the current setting is on)
ON? (if the current setting is off)
or
OFF? (if the current setting is on)
CONFIRM?
1
6
7
8
5
4
3
2
1 Power Indicator
On when the baby unit is switched on.
Off when the baby unit is switched off.
2 Up / Volume +
Press to increase the speaker volume.
3 Nightlight
Press to turn on/off the nightlight.
4 Down / Volume -
Press to decrease the speaker volume.
Press and hold to reset settings to default.
5 Play / Stop
Press to play the lullaby.
Press again to stop playing.
6 Lullaby
Press to select the lullaby and start playing the
selected lullaby.
During lullaby playing, press to select and play the
other lullabies.
7Power
Press and hold to power on/off the baby unit.
8 Nightlight Indicator
On when nightlight is turned on.
Off when nightlight is turned off.

Important guidelines for installing our Baby Monitor
• To use your baby unit and parent unit together, you must be able to establish a radio link between them, and the range
will be affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic doors or reinforced concrete, between
the baby and parent unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such
as TV's, computers, cordless or mobile phones, fluorescent lights or dimmer switches.
• If the signal is poor, try moving the parent and/or the baby unit to different positions in the rooms.

7
1. SAFETY INSTRUCTIONS ..................................8
2. GETTING STARTED...........................................9
2.1 Baby unit power supply.....................................9
2.2 Parent unit battery installation...........................9
2.3 Belt clip on parent unit and baby unit..............10
3. USING YOUR BABY MONITOR.......................11
3.1 Power on/off the parent unit............................11
3.2 Power on/off the baby unit ..............................11
3.3 Adjust speaker volume....................................11
3.4 Talk Back ........................................................11
3.4.1 Adjust talk back volume........................11
3.5 Temperature ...................................................12
3.6 Lullaby.............................................................12
4. PARENT UNIT SETTINGS ...............................12
4.1 Set the language.............................................12
4.2 Sound alert......................................................12
4.3 Set the nightlight .............................................12
4.4 Reset...............................................................13
5. DISPOSAL OF THE DEVICE
(ENVIRONMENT)..............................................13
6. CLEANING........................................................14
7. TROUBLESHOOTING ......................................14
8. GENERAL INFORMATION...............................15
9. TECHNICAL SPECIFICATIONS.......................18
EC DECLARATION OF CONFORMITY ...........19

8SAFETY INSTRUCTIONS
1. SAFETY INSTRUCTIONS
WARNING:
STRANGULATION HAZARD - Keep the adapter cord
out of baby's reach.
NEVER place the baby monitor or its cord within the cot.
Secure the cord some distance away from baby's reach.
Never use extension cords with AC Adapters. Only
use the AC Adapters provided.
This baby monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as
described in the User's Guide, safe to use. Therefore,
always read the instructions in this User's Guide carefully
before using the device.
• Determine a location for the baby monitor that will
provide the best audio reception of your baby in his
cot.
• Place the baby monitor on a flat surface, such as a
dresser, bureau, or shelf.
• NEVER place the baby monitor or its cord within the
cot.
• Secure the cord to the wall to keep cord away from the
baby's reach.
• Adult assembly is required. Keep small parts away
from children when assembling.
• This product is not a toy. Don't allow children to play
with it.
• This baby monitor is not a substitute for responsible
adult supervision.
• Keep this User's Guide for future reference.
• Do not cover the baby monitor with a towel or blanket.
• Never use extension cords with power adapters. Only
use the power adapters provided.
• Test this monitor and all its functions so that you are
familiar with it prior to actual use.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
• Only use the chargers and power adapters provided.
Do not use other chargers or power adapters as this
may damage the device and battery pack.
• Only insert battery pack of the same type.
• Do not touch the plug contacts with sharp or metal
objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the
instructions. Use only battery pack with rating: 2.4V
400mAh.

GETTING STARTED 9
2. GETTING STARTED
2.1 Baby unit power supply
1. Insert the small plug of the power adapter into the
side of the baby unit.
2. Connect the other end of the power adapter to the
mains socket.
NOTE
Only use the provided power adapter.
2.2 Parent unit battery installation
parent unit before you use it for the first time or when the
parent unit indicates that the battery is low.
1. Turn the belt clip so that it is in the hanging position.
2. Slide off the battery compartment cover.
3. Insert the battery plug of the supplied battery pack
into the battery jack inside the compartment.
4. Reattach the battery compartment cover.
DC JACK
DC PLUG
Battery JACK
Battery PLUG
The parent unit comes with a battery pack. Charge the

10 GETTING STARTED
5. Insert the small plug of the power adapter into the
side of the parent unit.
6. Connect the other end of the power adapter to the
mains socket.
7. The Charging Indicator comes on.
NOTE
Only use the provided power adapter.
2.3 Belt clip on parent unit and baby unit
1. Belt clip mode: applicable for parent unit only.
2. Support stand mode: lift up and turn the belt clip
by half turn to convert into support stand mode.

USING YOUR BABY MONITOR 11
3. USING YOUR BABY MONITOR
Please read these instructions carefully, and be reminded
that this baby monitor is just intended as an aid. It is not a
substitute for responsible, correct parental supervision.
3.1 Power on/off the parent unit
1. Provided the parent unit is off, press and hold 0until
the Link Indicator is on. The parent unit is now
powered on and the parent unit will search for and link
itself to the baby unit.
2. Provided the parent unit is on, press and hold 0until
the Link Indicator is off. The parent unit is now
powered off.
3.2 Power on/off the baby unit
Provided the baby unit is off, press and hold 0until the
Power Indicator is on. The baby unit is now powered on.
Provided the baby unit is on, press and hold 0until the
Power Indicator is off. The baby unit is now powered off.
NOTE
If you place the parent and baby units too close together,
you will hear a high pitched noise, this is normal. The units
are designed to be located at a distance from one
another, e.g. in separate rooms.
3.3 Adjust speaker volume
There are 5 volume levels on the baby unit, and 6 levels
on the parent unit, including
VOLUME OFF .
1. Press +or -on the parent unit or +or -on
baby unit to access the current volume level.
2. Press +to increase or -to decrease the volume of
the parent unit or baby unit respectively.
VOLUME OFF will
be displayed if the volume is turn off on parent unit.
Changing the volume setting on the baby unit affects the
volume when you use the Talk Back feature and when
playing a lullaby.
3.4 Talk Back
You can use the Talk Back feature to comfort and
reassure your baby.
Whilst using Talk Back you will not be able to hear your
baby until you release the button.
1. Press and hold 7on the Parent unit to speak to baby.
The display on the Parent unit shows Talk.
2. Release to hear your baby again.
3.4.1 Adjust talk back volume
The baby unit has 5 volume levels from Level 1 to Level 5.
During Talk Back, press +or -on the baby unit to
increase or decrease the volume respectively.

12 PARENT UNIT SETTINGS
NOTE
The lullaby will stop playing when talkback is activated.
3.5 Temperature
The baby unit constantly monitors the temperature in your
baby's room and alerts you if it gets too hot (higher than
102ºF) with text display "
HI TEMP " or too cold (lower than
57ºF) with "
LOW TEMP ".
The temperature is displayed clearly on the parent unit in
idle screen.
3.6 Lullaby
There are 5 lullabies available for playing to soothe your
baby to sleep.
1. Press 2on the baby unit to select the lullaby
start playing.
2. During playback, press 2to toggle between different
lullabies.
OR
Press 3on the baby unit to start playing the selected
lullaby. Press again to stop playing.
4. PARENT UNIT SETTINGS
4.1 Set the language
1. Press 9to access main menu.
2. Press 9and +or -to select your desired
language.
3. Press 9to confirm.
4.2 Sound alert
When sound alert is set ON, the baby unit monitors
continuously and the sounds*can be heard on the parent
unit even its speaker volume is off.
1. Press 9to access main menu.
2. Press +or -to select
SOUND ALERT .
3. Press 9to turn on or off the sound alert.
4. Press 9to confirm.
4.3 Set the nightlight
1. Press 9to access main menu.
2. Press +or -to select
NIGHTLIGHT .
3. Press 9to turn on or off the nightlight.
4. Press 9to confirm.
* The sound is audible only if the sound level at baby side
reaches preset typical sensitivity level.
and

DISPOSAL OF THE DEVICE (ENVIRONMENT) 13
4.4 Reset
You can restore all the adjustable settings back to their
original factory settings.
1. Press 9to access main menu.
2. Press +or -to select
RESET .
3. Press 9and display will show
CONFIRM? .
4. Press 9
5. DISPOSAL OF THE DEVICE
(ENVIRONMENT)
At the end of the product lifecycle, you
should not dispose of this product with
normal household waste. Take this product
to a collection point for the recycling of
electrical and electronic equipment. The
symbol on the product, user's guide and/or box indicates
this.
Some of the product materials can be re-used if you take
them to a recycling point. By reusing some parts or raw
materials from used products you make an important
contribution to the protection of the environment.
Please contact your local authorities in case you need
more information on the collection points in your area.
Dispose of the battery pack in an environmentally-friendly
manner according to your local regulations.
idle state. to confirm. The unit will then return to

14 CLEANING
6. CLEANING
Clean MBP16 with a slightly damp cloth or with an anti-
static cloth. Never use cleaning agents or abrasive
solvents.
Cleaning and care
• Do not clean any part of the product with thinners or
other solvents and chemicals - this may cause
permanent damage to the product which is not
covered by the warranty.
• Keep your MBP16 away from hot, humid areas or
strong sunlight, and don't let it get wet.
• Every effort has been made to ensure high standards
of reliability for your MBP16. However, if something
does go wrong, please do not try to repair it yourself -
contact Customer Service for assistance.
7. TROUBLESHOOTING
Link light on the parent unit does not come on
• Check whether the parent unit is powered on.
• Check whether the supplied battery pack is correctly
installed and that it is not drained.
• Recharge the parent unit by connecting it to the power
supply.
Link light on the parent unit flashes
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the
units, but not closer than 1.5 metre.
• The baby unit may be switched off. Press and hold 0
key to switch on the baby unit.
Low battery light on the parent unit flashes
• Battery pack in the parent unit is running low. Connect
the parent unit to the mains power with the supplied
power adaptor for recharging.
The parent unit beeps
• Lost connection with the baby unit. Reduce the
distance between the parent unit and the baby unit, but
not closer than 1.5 metre.
• The baby unit may be switched off. Press and hold 0
key to switch on the baby unit.

GENERAL INFORMATION 15
• Battery pack in parent unit is running low. Connect the
parent unit to the mains power with the supplied power
adaptor for recharging.
Cannot hear sound or baby cry from the parent unit
• The volume level in the parent unit may be set too low,
increase the volume level of the parent unit. Refer to
section 3.3 for volume level settings.
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the
units, but not closer than 1.5 metre.
The baby monitor system produces a high-
pitched noise
• The parent unit and the baby unit are too close to each
other. Make sure the parent unit and baby unit are at
least 1.5 metre away from each other.
• The speaker volume of the parent unit maybe set too
high. Decrease the volume of the parent unit.
Battery pack in the parent unit is running low
quickly
• The volume level of the parent unit may be set too high
which consumes power. Decrease the volume level of
the parent unit. Refer to section 3.3 for volume level
settings.
Talk back feature is not working
• Check that the volume is loud enough at the baby unit,
refer to section 3.3.
8. GENERAL INFORMATION
If your product is not working properly...
1. Read this User's Guide.
2. Visit our website: www.motorola.com
3. Contact Customer Service at
UK 0845 218 0890
To order a replacement battery pack for parent unit,
contact customer service.
Consumer Products and Accessories
Limited Warranty ("Warranty")
Thank you for purchasing this Motorola branded product
manufactured under license by Binatone Electronics
International LTD ("BINATONE")
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE
warrants that this Motorola branded product ("Product") or
certified accessory ("Accessory") sold for use with this
product that it manufactured to be free from defects in
materials and workmanship under normal consumer
usage for the period outlined below. This Warranty is your
exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer
purchaser, and is not transferable.
ROI 08187 62092

16 GENERAL INFORMATION
What will BINATONE do?
BINATONE or its authorized distributor at its option and
within a commercially reasonable time, will at no charge
repair or replace any Products or Accessories that does
not conform to this Warranty. We may use functionally
equivalent reconditioned/ refurbished/ pre-owned or new
Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR
OR REPLACEMENT PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF
THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO
EVENT SHALL MOTOROLA OR BINATONE BE LIABLE,
WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT OR
ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY
KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY TO
USE THE PRODUCTS OR ACCESSORIES TO THE FULL
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY
LAW.
Some jurisdictions do not allow the limitation or exclusion
of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations
or exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may also have other
rights that vary from one jurisdiction to another.
Products Covered Length of Coverage
Consumer Products One (1) year from the date of the
products original purchase by the
first consumer purchaser of the
product.
Consumer
Accessories
Ninety (90) days from the date of
the accessories original purchase
by the first consumer purchaser
of the product.
Consumer Products
and Accessories that
are Repaired or
Replaced
The balance of the original
warranty or for ninety (90) days
from the date returned to the
consumer, whichever is longer.

GENERAL INFORMATION 17
Exclusions
Normal Wear and Tear. Periodic maintenance, repair
and replacement of parts due to normal wear and tear are
excluded from coverage.
Batteries. Only batteries whose fully charged capacity
falls below 80% of their rated capacity and batteries that
leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a)
improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches,
etc.) to the surface of the product resulting from misuse;
(b) contact with liquid, water, rain, extreme humidity or
heavy perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or
Accessory to abnormal usage or conditions; or (d) other
acts which are not the fault of MOTOROLA or
BINATONE, are excluded from coverage.
Use of Non-Motorola branded Products and
Accessories. Defects or damage that result from the use
of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded
from coverage.
Unauthorized Service or Modification. Defects or
damages resulting from service, testing, adjustment,
installation, maintenance, alteration, or modification in
any way by someone other than MOTOROLA,
BINATONE or its authorized service centers, are
excluded from coverage.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of
tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or
parts, are excluded from coverage.
Communication Services. Defects, damages, or the
failure of Products or Accessories due to any
communication service or signal you may subscribe to or
use with the Products or Accessories is excluded from
coverage.
How to Obtain Warranty Service or Other
Information?
To obtain service or information, please call:
UK 0845 218 0890
You will receive instructions on how to ship the Products
or Accessories at your expense and risk, to a BINATONE
Authorized Repair Center. To obtain service, you must
ROI 08187 62092

18 TECHNICAL SPECIFICATIONS
include: (a) the Product or Accessory; (b) the original
proof of purchase (receipt) which includes the date, place
and seller of the Product; (c) if a warranty card was
included in your box, a completed warranty card showing
the serial number of the Product; (d) a written description
of the problem; and, most importantly; (e) your address
and telephone number.
These terms and conditions constitute the complete
warranty agreement between you and BINATONE
regarding the Products or Accessories purchased by you,
and supersede any prior agreement or representations,
including representations made in any literature
publications or promotional materials issued by
BINATONE or representations made by any agent
employee or staff of BINATONE, that may have been
made in connection with the said purchase.
9. TECHNICAL SPECIFICATIONS
RF frequency band 1881.792 MHz - 1897.344 MHz
Channels 10
Operating
temperature
5ºC to 45ºC
Baby unit voltage
(Adapter output)
6V DC, 450mA <Tenpao
S004LB0600045; Salcomp VT0601>
Parent unit voltage 2.4V 400mAh Ni-MH battery pack
<BYD H-2/3AAA400X2-LD25; GP
GPRHC043M027>
Parent unit voltage
(Adapter output)
6V DC, 450mA <Tenpao
S004LB0600045; Salcomp VT0601>

EC DECLARATION OF CONFORMITY 19
ENGLISH
BINATONE TELECOM PLC
1 Apsley Way London NW2 7HF,United Kingdom.
Tel: [phone] Fax: [phone]
e-mail: [email protected]
________________________________________ .
EC Declaration of Conformity
We the manufacturer / Importer : Binatone Telecom Plc
1 Apsley Way London
NW2 7HF, United Kingdom.
Declare under our sole responsibility that the following product
Type of equipment:
Digital Baby Monitor
Model Name: MBP 16
Country of Origin: China
Brand: Motorola
complies with the essential protection requirements of R&TTE
Directive 1999/5/EC on the approximation of the laws of the Member
States relating to Radio Spectrum Matters, the Council Directive
2004/108/EC on the approximation of the laws of the Member States
relating to electromagnetic compatibility (EMC) and the European
Community Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements
relating to the essential requirements according to Article 3 R&TTE
was based on Annex III of the Directive 1999/5/EC and the following
standard:
Radio Spectrum: EN301406 V2.1.1 (2009-07)
EMC: EN301489-6 V1.3.1 (2008-08)
EN301489-1 V1.8.1 (2008-04)
Electrical Safety: EN60950-1:2006+A11:2009+A1:2010
The product is labelled with the European Approval Marking CE as
show. Any Unauthorized modification of the product voids this
Declaration.
Manufacturer / Importer
(Signature of authorized person)
London, 10 Apr 11
Signature: (Paul Tsui/ Product Operation Place & Date :
Director)

Manufactured, distributed or sold by Binatone
Electronics International LTD., official licensee
for this product. MOTOROLA and the Stylized
M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other
trademarks are the property of their respective
owners.
© 2011 Motorola Mobility, Inc. All rights
reserved.
Version
Printed in China
5.0