Motorola MBP10S User manual

MBP10S - Quick Start Guide
For a full explanation of all features and instructions, please refer to the User's Guide.
1 Setting up your digital baby monitor
Installing the batteries for the Parent unit
Connecting the power supply for the baby unit
D
• Only use the enclosed
adapter (5V DC/600mA).
Connecting the power supply for the parent unit
C
• Only use the enclosed
adapter (5V DC/600mA).
MBP10S_QSG_EN_EU.fm Page 1 Thursday, August 13, 2009 6:01 PM
●
Insert the battery pack into
the battery compartment
socket.
●
Place the battery cover into
the compartment.
Bl ac k
Re d
• Turn the knob 90 degrees
the battery cover.
90° MAX
Note: Charge the batteries
for 16 hours before using
without mains power.
AB
Open
Close
battery sit s properly inside
clockwise to lock
Replacing and removing the battery cover
and push the plug into the
position , mak ing sure the

2 Basic operation of the keys
3 General Information
If your product is not working properly...
1. Read this Quick Start Guide or the User’s Guide.
2.Contact Customer Serviceat
Parent unit
PON/OFF button Press and hold to switch on the unit. Press and hold to switch off the unit.
() UP/DOWN buttons Press to increase/decrease the volume level.
Baby unit
PAGING button Press the FIND key to locate the misplaced parent unit.
Printed in China
Version 3.0
MBP10S_QSG_EN_EU.fm Page 2 Thursday, August 13, 2009 6:01 PM
Manufactured, distributed or sold by Binatone Electronics International LTD., ofcial licensee
for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks
of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are
the property of their respective owners.
© 2013 Motorola Mobility LLC. All rights reserved.
[phone] in Europe
Email: [email protected]