Motorola MOTOSLVR L9 User manual

MOTOSLVR L9
MOTOSTART
MOTOSTART

insert your SIM card
Your Subscriber Identity Module (SIM) card stores your
phone number and other information. Turn off your
phone and remove your battery before you install
or remove a SIM card.
essentials
Note: Before using your phone for the first
time, be sure to review the important safety
information in the user's guide. Periodically
review this information so you remember
how to safely use your phone.
12

insert a memory card
You can store photos,
sounds, and other
multimedia files on
an optional removable
memory card. Press the
card in until it clicks into
place.
essentials
34

insert your battery
charge your battery
New batteries are
not fully charged.
Plug the battery
charger into your
phone and an
electrical outlet.
Your phone might
take several seconds
to start charging the
battery. When finished, your display shows
Charge Complete.
12
essentials

turn it on & off
To turn on your phone, press and
hold
O for a few seconds or until
the keypad or display lights up.
To turn off your phone, press and
hold
O for a few seconds.
make a call
To make a call, enter a phone number and press N .
To “hang up,” press
O .
answer a call
To answer a call when your phone rings and/or
vibrates, press
N .To “hang up,” press O .
essentials

key map
Introducing your new Motorola L9 GSM.
Tip: Press the center key
s to open the main menu
and select menu options. Press the clear/back key
D
to delete letters or numbers or to go back one menu.
Open menu and
select.
Scroll up, down,
left, or right.
Volume Keys
PTT Key
Left Soft Key
FM Radio Key
Make & answer
calls.
Charge up or go
handsfree.
Smart Key
Right Soft Key
Clear/Back Key
Turn on & off, hang
up, exit menus.
Microphone
basics

recent calls
Your phone keeps lists of incoming and outgoing calls.
Press
s > sRecent Calls , to access to Dialed Calls , Received
Calls
, or Missed Calls folders.
Scroll to a call. A %next to a call means the call is
connected.
• To call the number, press
N .
• To see call details (like time and date),
press the center key
s .
lock & unlock keypad
You can lock your keypad to prevent accidental key
presses. To lock your keypad, go to the home screen
and hold
* for two seconds. To unlock it, press the
Unlock key (right soft key), then the OK key (left soft key).
You can also set your phone to automatically lock
the keypad when you’re not using it. To set how long
your phone waits before it locks your keypad, press
s
>
wSettings
> Security > Keypad Lock > Timer > a time interval
or
Off .
basics

ring style
Press s >
wSettings
> Ring Styles > Style: style name
õ Loud Î Vibrate ö Vibe then Ring
ô Soft Ì Vibe & Ring Í Silent
Tip: Your current ring style icon appears at the top of
your screen.
Shortcut: To change your ring style profile from
the home screen, press the volume keys up or down.
You can also just hold the
# key to switch to Silent
and back.
customize

wallpaper
Choose your display background image:
Press
s > wSettings > Personalize > Wallpaper
screen saver
Choose the image or animation that appears when
your phone is on but inactive.
Tip: To extend battery life, turn off the screen saver.
Press
s > wSettings > Personalize > Screen Saver
customize

phonebook
store a phone number
Press s >
nPhonebook
, then press Options > Create New
> Phone Contact or SIM Contact
Note: You can store new contacts in your phone’s
memory or on your SIM card. Contacts on the SIM
card only have a
Name and Number .
1Enter a name and other details for the phone
number. To select a highlighted item, press the
center key
s .
2Press the
Done key to store the number.

phonebook
call a stored phone number
Press s >
nPhonebook
1Scroll to the phonebook entry.
Shortcut: In the phonebook, press keypad keys
to enter the first letters of an entry you want.
2Press
N to call the entry.
Note: You can show contacts stored in your phone’s
memory or on your SIM card. Press
s >
nPhonebook
,
then press
Options > View > Phone & SIM Card , SIM Card ,
or
Phone Contacts .

232
take & store or send photos
Your 2 megapixel camera’s lens is on the back of your
phone. To get the clearest pictures, wipe the lens
clean with a dry cloth before you take a picture.
1Press
s >
hMultimedia
> Camera to see the camera
viewfinder.
Open the camera menu.
Remaining
Photos
Camera Mode
(photo or
video)
Resolution
Storage
(phone or
memory card)
Press
s
to take
the picture.
Press
S up
or down to
view camera
settings.
Press left or
right to change.
photos
Timer
Focus point
Exit the
camera.
Options Exit
Zoom
1x

photos
Note: Adjusting the exposure affects the brightness
of both the viewfinder display and the captured photo.
Press
0 to change from landscape mode to portrait
mode.
2Press the center key
s to take the photo in the
viewfinder. You can:
• Press the
Options key to store the photo.
• Press the
Send key to send the photo in
a message.
Your phone might tell you that this is a
Multimedia
Msg
, since it has a picture in it. Some other
phones or networks do not support picture
messages. Press the
Yes key to send the
message.
• Press
D to discard the photo and return to
the active viewfinder.

Before you capture the photo, you can press Options to
open the camera menu:
options
Go To Pictures
See stored pictures and
photos.
Go To Video Mode
Switch to the video camera.
Auto-Timed Capture
Set a timer for the camera to
take a photo.
Camera Setup
Open the setup menu to
adjust photo settings.
Switch Storage Device
Choose to store
pictures on your
phone or a memory card.
Free Space
See how much memory
remains.
Note: Your service provider
may store some content in
user memory before you
receive the phone.
photos

see stored photos
Press s >
hMultimedia
> Pictures > picture name
To see a picture, scroll to it and press the center key
s . To see it at full display size, press Options > View Full
Screen
(press any key to return to the regular view).
To edit a picture, scroll to it and press
Options > Edit .
You can choose settings such as
Brightness and Contrast ,
or effects such as
Blur and Mirror . You cannot edit some
copyrighted files.
photos

listening to the radio
Press { to turn on the radio.
Note: If a radio station sends song information,
your phone shows it in the display.
To store or change station preset, tune to the station
you want, then press and hold a number key. Now, you
can just press the number key to tune to that station.
To close the radio display but leave it playing,
press
Options > Hide . To see the radio again, press { .
stereo FM radio
Open the radio menu.
Radio station
frequency
and name.
Press
S
up or down
to change
the frequency
(hold to
search for
the next
FM station).
Close the
radio.
Options
101.00
FM MOTO
Back

play music files
Your phone can play and store MP3 and AAC song
files. You can use a removable memory card with
your phone to store more songs.
Note: You cannot use the audio player with a USB
cable connected to your phone.
Press
s >
QGames & Apps
> Digital Audio Player
Press S up or down to scroll to an option, and press
the center key
s to select it:
options
Playlists
Create or play a playlist.
Songs
Show and play individual songs.
Note: All of your phone’s songs
appear in the
Songs list. Some songs
do not have any
Artist , Album , or Genre
information stored, so they don’t
appear in those lists.
digital audio player

options
Albums,Artists,
or Genres
Select an album, artist, or genre,
to show or play their songs.
When you select a song, press the center key
s for
play , press
S left for previous , or press S right
for next . To pause the song, press
Pause .
Note: To change repeat , shuffle , and other
settings, press
Options .
Use the volume keys on the left side of your phone to
control volume.
Tip: You can listen to tunes on your way. Use airplane
mode to make your phone safe to use with a wired
headset, even while you’re on a plane. Press
s
>
wSettings
> Airplane Mode > On .
digital audio player

load music files
To download songs from the Internet, use your phone’s
micro-browser (press
s >
áWeb Access
> Browser and
go to the page with the file). To copy files between
your phone and a computer, use a cable connection or a
Bluetooth™ connection (see your phone’s user manual).
Note: Your phone may not play audio files that have a bit
rate higher than 128 kbps. If you try to download or play
one of these files, your phone might show you an error
or ask you to delete the file. Metadata information is not
supported for MP4 formatted files.
digital audio player