Motorola MOTOSTART H350 User manual

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark
Office. All other product or service names are the property of their respective
owners. The Bluetooth wordmark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Motorola, Inc. is under license. Other trademarks
and trade names are those of their respective owners. Printed in the EU.
© 2007 Motorola, Inc. All rights reserved.
CFJN2975B - 01/2007
CFJN2975B - 01/2007

a
rk
i
ve
n
c.
r
ks
H350
H350
®
CFJN2975B - 01/2007

Figure 1
1
Figure 2
Charging
Port
1
3
2
4
5

2
Figure 3
Figure 4

3
General and safety information
European Union Directives Conformance Statement
Hereby, Motorola Inc., declares that this H350 is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
You can view your product's Declaration of Conformity (DoC) to Directive
1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.
Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose the
product with household waste.
Recycling Mobile Phones and Accessories
Do not dispose of mobile phones or electrical accessories, such as
chargers or headsets, with your household waste. In some countries or
regions, collection systems are set up to handle electrical and electronic
waste items. Contact your regional authorities for more details. If collection
systems aren’t available, return unwanted mobile phones or electrical
accessories to any Motorola Approved Service Centre in your region.
FCC Notice to Users
Users are not permitted to make changes or modify the device in any way.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
See-47-CFR-Sec.-15.21.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. See-47-CFR-Sec.-15.19(3).
English

Initial set up
Welcome to the world of Motorola digital wireless communications! We
are pleased that you have chosen the Motorola H350 Bluetooth®Hands-
free Headset.
Before you begin
Take a moment to familiarize yourself with your H350 headset.
See figure 1 on page 1.
1 Earhook
2 Volume buttons
3 Call button
4 Blue indicator light
5 Microphone
Charging your headset
See figure 2 on page 1
First time use: Charge your headset for 2 hours.
Recharging: When you hear 5 rapid high tones through the headset
speaker repeated at 60-second intervals, the headset battery needs to be
recharged.
Note: the headset is not functional while charging.
The rechargeable battery that powers this product must be
disposed of properly and may need to be recycled. Contact
your local recycling center for proper disposal methods. Never
dispose of batteries in fire because they may explode.
Wearing the headset
You can wear your H350 headset on your left of right ear. The headset comes
ready for the right ear.
Placing the headset on your ear: refer to figure 3 on page 2
Placing the headset on the left ear: refer to figure 4 on page 2
• Open the earhook 90°
• Detach the earhook from the hinge pin.
4
English

Changing volume button orientation
If you change your headset to wear it on the other ear, you can also change
the orientation of the volume buttons.
1 Turn the headset power off
2 Press the Call button and the volume button you want to assign as the
“volume” up button until the indicator light flashes twice.
The headset power turns on.
Pairing your headset and phone
Your phone’s Bluetooth feature is off by default. Make sure the Bluetooth
feature is permanently turned on in your phone. Please check your phone’s
user’s guide.
Before you can use your headset, you must pair (link) it with your phone.
1. With the headset power off, press and hold the Call button for 5 seconds
until the indicator light turns on and remain steadily lit.
If the indicator light is flashing or does not remain steadily lit, turn off the
headset and repeat this step.
2. Perform a device discovery (or scan) from the phone. For details about
device discovery, consult your phone’s user’s guide. The phone lists
Bluetooth devices it finds.
3. Select Motorola H350 in the list of discovered devices and confirm by
following the on-screen prompts.
4. When prompted by the phone, enter the passkey 0000 and confirm.
When your headset successfully pairs with your phone, the indicator light
changes from steadily to flashing blue.
After you have successfully paired your phone and headset, you do not need
to repeat these steps each time you use the headset.
e
t
r
5
English

Test and use
Your phone and headset are now paired and ready to make and receive
calls. To confirm they are successfully paired and operating properly, make
a call from you phone. You will hear ringing from the headset.
Paired link to additional devices
Your headset can store pairing information for up to 8 different devices in
chronological order. When an attempt to pair to more than 8 devices is
made, the oldest paired device is removed from the list.
The headset will automatically initiate a connection with the last device it
was connected to either by powering up the headset or by pressing the Call
button. If you want to connect the headset to another device in the paired
device list, you must initiate the connection from that device. Whichever of
the 8 devices initiates a connection to the headset afterwards, that device
then becomes the “last connected” device.
English
6
English

7
English
Using your headset
Turning your headset on & off
To turn your headset on, press and hold the Call button until the indicator
light flashes rapidly. Then, release the button.
To turn you headset off, press and hold the Call button until the indicator light
flashes rapidly and then turns off.
Making & receiving calls
Function Action
Receive a call Tap the Call button
End a call Tap the Call button
Reject a call Press and hold the Call button until you hear a
beep
Redial last call Press and hold the Call button until you hear a
beep
Make a voice dial call Tap the Call button and speak the name after
the tone
Transfer a call from the phone to the Tap the call button
headset
Answer a second incoming call Press and hold the Call button until you hear a
Put active call on hold beep (The 1st call is placed on hold).
Toggle between two active calls Press and hold the Call button until you hear a
beep
Join a 3 way call (note: feature is Press and hold both volume buttons
phone/network dependent)
Disable or enable the indicator light Press and hold both volume button for 3 to 4
seconds
Mute or un-mute a call Tap both Volume buttons
Your headset supports both hands-free and headset profiles. Accessing call
functions depend upon which profile your phone supports. See your phone’s
user’s guide for more information.

Indicator lights
The indicator light provides information about your headset status.
With the charger plugged in:
Headset indicator Headset status
On (steady) Charge in progress
Off Charging complete
With no charger plugged in:
Headset indicator Headset status
Off Power off
On (steady) Pairing mode
10 rapid flashes Pairing successful
Quick flash Standby (not on a call)
Slow pulse Connected (on a call)
Note: after 5 minutes of inactivity, the light stop flashing to conserve power,
but the headset is in standby mode. Any button press on the headset will
re-awaken the headset and the flashing resumes.
8
English