Motorola SURFboard SB4101 User manual

SB4101 Cable Modem Installation
OR
Ethernet
Reset
button
USB
TM
UNIX users must open User Guide
(SB4101.pdf) located in Acrobat
folder on CD-ROM.
High Speed Access to the Internet
LINK
ACT
100
USB
CABLE
POWER

This information is to help you quickly solve a problem. Before calling your service provider,
try pressing the reset button on the back panel to reboot.
Check that the power cord is plugged in.
Green POWER light
is OFF
Cannot receive or
send data
Try pressing the Standby button.
Check that your TV is working if you have cable TV.
Try pressing the Standby button.
Check the coaxial cable connections.
If the LINK/ACT light on the rear panel is OFF,
check the Ethernet cable.
Check the IP address
.
(follow the steps in Verify Your IP Address)
Check the lights on the front panel.
Note the first light that is off, and then refer to User Guide.
Troubleshooting
SB4101
SURFboard
CableModem
®
Power
Receive
Send
Online
Activ ity
Standby
Standby
Standby
The Problem The Solution
494216-001